外文翻譯---模塊化設計產品設計的分解與整合

1、<p><b>　　英文原文:</b></p><p>　　Design for Modularity: Product Design for Decomposition and Integration</p><p><b>　　ABSTRACT</b></p><p>　　In the last few ye

2、ars, corporation has engaged in studies to improve their design processes, ranging from marketing to support. Recent government, academic and industrial sector initiatives have sought advance technologies for developing

3、and managing product development environment. Many companies have established a concurrent design process for their product development and have recognized a need for tools in evaluating the level of decomposition and in

4、tegration, while analyzing the impact on t</p><p><b>　　KEYWORDS</b></p><p>　　Modularity, Group technology, Optimization, Decomposition, Classification</p><p>　　1. Intro

5、duction</p><p>　　Modular design is a design technique that can be used to develop complex products using similar components . Components used in a modular product must have features that enable them to be co

6、upled together to form a complex product. Modular design can be also viewed as the process of producing units that perform discrete functions, and then the units are connected together to provide a variety of functions.

7、Modular design emphasizes the minimization of interactions between components, which will </p><p>　　Modular products refer to products that fulfill various overall functions through the combination of distin

8、ct building blocks or modules. In the sense that the overall function, performed by the product, can be divided into sub functions that can be implemented by different modules or components. An important aspect of modula

9、r products is the creation of a basic core unit to which different elements (modules) can be fitted, thus enabling a variety of versions of the same module to be produced. T</p><p>　　Most design problems can

10、 be broken down into a set of easy to manage simpler sub-problems. Sometimes complex problems are reduced into easier sub-problems, where a small change in the solution of one sub-problem can lead to a change in other su

11、b-problems’ solutions. This means that the decomposition has resulted in functionally dependent sub-problems. Modularity focuses on decomposing the overall problem into functionally independent sub-problems, in which int

12、eraction or interdependence between </p><p>　　Modularity in production systems aims at building production systems from standardized modular machines. The fact that a wide diversity of production requirement

13、s exists has led to the introduction of a variety of production machinery, and a lack of agreement on what the building blocks should be. This means that there are no standards for modular machinery. In order to build a

14、modular production system, production machinery must be classified into functional groups from which a selection of a m</p><p>　　2．Overview of Product Development</p><p>　　Product development is

15、 a necessary and important part of the activities performed by a manufacturing firm. Due to changes in manufacturing technology, consumer preferences, and government regulations (to name a few influences), existing produ

16、cts will become less profitable over time. The sales volume of a typical product starts slowly, accelerates, becomes flat, and then steadily declines. Although there may be a few products that remain profitable for many

17、years, firms continually develop new p</p><p>　　A product development process is the set of activities needed to bring a new product to market. A product development organization includes the engineers, mana

18、gers, and other personnel who make process and product engineering decisions and perform these activities. (Note that, in this paper, the term new product covers the redesign of an existing product as well.)</p>&

19、lt;p>　　Because making good decisions requires expertise and an organization of people can be experts in only a few things, a manufacturing firm specializes in a certain class of products. It focuses its attention on t

20、he market for that class of products, the technologies available to produce that class, and the regulations relevant to that class.</p><p>　　Like other parts of the business, a product development organizati

21、on seeks to maximize the profit of the manufacturing firm subject to the relevant regulatory and ethical constraints and other conditions that the firm’s owners impose based on their values. A product development organiz

22、ation does this by regularly introducing new products that the firm can manufacture, market, and sell. Fundamentally, then, a product development organization transforms information about the world (e.g., technolog</p

23、><p>　　The following nine steps are the primary activities that many product development processes accomplish (Schmidt et al., 2002):</p><p>　　Step 1. Identify the customer needs.</p><p&

24、gt;　　Step 2. Establish the product specification.</p><p>　　Step 3. Define alternative concepts for a design that meets the specification.</p><p>　　Step 4. Select the most suitable concept.</p

25、><p>　　Step 5. Design the subsystems and integrate them.</p><p>　　Step 6. Build and test a prototype; modify the design as required.</p><p>　　Step 7. Design and build the tooling for p

26、roduction.</p><p>　　Step 8. Produce and distribute the product.</p><p>　　Step 9. Track the product during its life cycle to determine its strengths and weaknesses.</p><p>　　This lis

27、t (or any other description that uses a different number of steps) is an extremely simple depiction that not only conveys the scope of the process but also highlights the inherent (but unquestioned) decomposition. There

28、are many other ways to represent product development processes and the component tasks, including the use of schedules or a design structure matrix (Smith and Eppinger, 2001).</p><p>　　Manufacturing firms un

29、derstand that design decisions (though made early in the product life cycle) have an excessive impact on the profitability of a product over its entire life cycle. Consequently, product development organizations have cre

30、ated and used concurrent engineering practices for many years (Smith, 1997, provides a historical view). Many types of tools and methods (such as cross-functional product development teams and design for manufacturing gu

31、idelines) have been created, adopted, </p><p>　　It should be noted, however, that decomposition is not the only way to describe product development. As an alternative to decomposing a system design problem i

32、nto subproblems, Hazelrigg (1996) proposes creating and refining system design models to express how detailed design variables affect the overall system performance. This approach suggests that a product development proc

33、ess would end with using the model to find the optimal design. Hazelrigg (1998) encourages this type of optimization but </p><p>　　3. A Methodology for Design for Modularity</p><p>　　A three-ph

34、ase methodology is proposed for the development of complex products using the modularity concept [1,2]. The proposed methodology matches the criteria set by the design for functionality, assembly and manufacture. Some of

35、 the major benefits associated with this methodology include:</p><p>　　· Increased design accuracy, efficiency, and the reuse of existing design for new programs.</p><p>　　· Potentia

36、l for integration of the developed methodology and technology into the engineering design activities.</p><p>　　· Modular product design and the process of planning the production are integrated in one

37、overall engineering process in which product features are mapped into their feasible process(es) in a one to one correspondence.</p><p>　　In order to implement this concept successfully, the manner in which

38、the modules are selected is critical. By establishing simple interfaces within the modules, the numbers of interactions are then reduced. The steps associated with this methodology include:</p><p>　　Phase I

39、- Decomposition Analysis: Design for Modularity and Classification</p><p>　　1. Product and problem decomposition.</p><p>　　2. Structural and modular decomposition.</p><p>　　3. Assoc

40、iativity analysis between the components and specification.</p><p>　　4. Application of group technology classification system.</p><p>　　5. Construction of the associativity measure matrix.</p

41、><p>　　6. Optimum selection of modules.</p><p>　　Phase II - Product Analysis: Design for Assembly and Functionality Analysis</p><p>　　1. Identify the components that could be produced

42、and assembled separately.</p><p>　　2. Determine of the order of disassembly and assembly for each sub-component module.</p><p>　　3. Establish the interfaces based on the analysis of the design f

43、eatures.</p><p>　　4. Determine of the order, which the sub-assemblies are assembled to produce the final product.</p><p>　　Phase III - Process Analysis: Design for Manufacture</p><p&g

44、t;　　1. Family identification and template retrieval.</p><p>　　2. Determination of the logical order of GT codes for the process of modules.</p><p>　　3. Machine and process parameter calculation.

45、</p><p>　　4. Variant process planning.</p><p>　　4. Decomposition Analysis: Design for Modularity and Classification</p><p>　　Phase I of the methodology further specifications assoc

46、iated with this phase are illustrated as follows:</p><p>　　4.1. Needs Analysis</p><p>　　The design engineer is usually given an ill-defined problem. In many situations, the designer has to respo

47、nd to the mere suggestion that there is a need for a product to perform a certain function. One of the main tasks is to find out precisely what are the needs and what do customers really want. An important step in the de

48、sign is to describe the product fully in terms of functional needs and physical limitations. These functional needs and physical limitations will form the product specificati</p><p>　　4.2. Product Requiremen

49、ts Analysis</p><p>　　Results of the needs analysis step are used to identify the product requirements. The development group begins by preparing a list of functional objectives needed to meet the customer’s

50、primary needs. Further analysis of customer needs reveals operational functional requirements that impose both functional and physical constraints on the design. Secondary customer requirements will be categorized as gen

51、eral functional requirements; they are ranked secondary because they will not affect the main </p><p>　　4.3. Product Concept Analysis</p><p>　　Product/concept analysis is the decomposition of th

52、e product into its basic functional and physical elements. These elements must be capable of achieving the product’s functions. Functional elements are defined as the individual operations and transformations that contri

53、bute to the overall performance of the product. Physical elements are defined as the parts, components, and subassemblies that ultimately implement the product’s function. Product concept analysis consists of product phy

54、sical dec</p><p>　　4.4. Product/Concept Integration</p><p>　　Basic components resulting from the decomposition process should be arranged in modules and integrated into a functional system. The

55、manner by which components are arranged in modules will affect the product design. The resulting modules can be used to structure the development teams needed. System level specifications are the oneto- one relationship

56、between components with respect to their functional and physical characteristics. Functional characteristics are a result of the operations and tra</p><p>　　Bottom level descriptions (detailed descriptions)

57、are used to determine the relationships between components, 1 if the relationship exists and 0 otherwise. This binary relationship between components is arranged in a vector form, “System Level Specifications Vector”(SLS

58、V). System level specifications identified in the previous step affects the general functional requirements in the sense that some specifications may help satisfy some general functional requirements, while other specifi

59、cations mi</p><p>　　The degree of association between components should be measured and used in grouping components into modules. Incorporating the general functional requirement weights can do this, in addi

60、tion to the system level specifications vectors and their impacts on the general functional requirements to provide a similarity index between components.</p><p>　　The similarity indices associated with comp

61、onents are arranged in a component vs. component matrix. Components with high degree of association should be grouped together in design modules. This can be accomplished by using an optimization model that maximizes the

62、 sum of the similarities. The optimization model will identify independent modules that can be designed simultaneously. Several models are available for optimization analysis of this model.</p><p>　　5．Types

63、of Decomposition</p><p>　　A product development process follows a decomposition scheme that reflects the experience of the organization and the individuals that inhabit the organization. This relationship ex

64、plains the design of many organizations and business processes, of course, and obviously applies to product development processes as performed in the real-world. (The study of contingency theory has explored the relation

65、ship of organization structure to the organization’s goals and environment.) The evolution of the p</p><p>　　Holt et al. (1960) mention a three-stage process for the evolution of a decision-making system. In

66、 the first stage, when an organization is small, skilled managers make decisions as situations arise. In the second stage, the complexity of the operations increases, and the firm installs a system of decisionmaking. For

67、 routine decisions, heuristics or simple rules guide decision-making. In the third stage, the firm seeks to improve decision-making by implementing decision support tools. Often thes</p><p>　　In conclusion,

68、rarely are product development processes explicitly designed to optimize profitability. Still, the never-ending quest to improve processes leads managers to change them, first hoping to improve this metric, then hoping t

69、o improve another, always seeking changes that improve all metrics simultaneously. Because different firms find themselves in different positions, they seek different things from their processes. More precisely, there ex

70、ist a large set of objectives, and each organ</p><p>　　Being unique, each product development organization has a unique product development process that embodies a unique decomposition. If each process has c

71、hanged over time due to many different reasons, it may seem unreasonable to describe the forces that shape specific product development processes. Indeed, Blanchard and Fabrycky (1998) state that a development process is

72、 a generic template that must be “tailored” to a specific project’s need. They describe three common processes: the waterfall mo</p><p>　　Still, some authors have described some of the factors that make cert

73、ain types of processes more or less successful. For instance, Loch and Terwiesch (1998) use an analytical model of concurrent engineering to show how uncertainty (and the speed of uncertainty reduction) affects the optim

74、al amount to overlap activities and the optimal frequency of meetings used to coordinate the concurrent activities. More generally, Pich, Loch, and De Meyer (2002) identify three project management strategies (i</p>

75、;<p>　　6. Summary and Conclusions</p><p>　　This article has presented a new methodology for modular design. The complete process is a three-phase process, but only phase I of the methodology is prese

76、nted. The method illustrates the significance of the group technology coding and classification and the optimization in modular design.</p><p>　　This synthesis contributes to a theory of design describes how

77、 design happens in practice and explains this behavior. The fundamental axioms include the profit maximization objective, bounded rationality (including limited time and resources available for product development), and

78、the presence of uncertainty.</p><p>　　Extending this theory of design will require better understanding of the advantages and drawbacks of different decompositions. Also useful will be understanding the rela

79、tionship between the effort spent to solve a design subproblem and the quality of the resulting solution.</p><p>　　It will be interesting to see how improvements in information technology and decision suppor

80、t systems increase the amount of information that one decision-maker can process and how these improvements change the balance between decomposition and integration.</p><p><b>　　中文翻譯：</b></p&g

81、t;<p>　　模塊化設計：產品設計的分解與整合</p><p><b>　　摘要:</b></p><p>　　在過去的幾年里，公司進行了研究，以改善他們的設計流程，從市場營銷支持。最近的政府，學術界和工業界的倡議尋求推進技術開發和管理的產品開發環境。許多公司已經建立了并行設計過程的產品開發和已認識到有必要工具在評價級別的分解和整合，同時分析了影響，最

82、后的設計方案。本文將提出一個三階段的方法設計的產品，同時考慮模塊化，組裝和制造。</p><p><b>　　關鍵詞:</b></p><p>　　模塊化，集團的技術，優化，分解，分類</p><p><b>　　1.導言</b></p><p>　　模塊化設計是一種設計技術，可用于開發復雜的產品采

83、用相同的組件 。組件中使用的產品必須具有模塊化功能，使他們能夠結合在一起，形成一個復雜的產品。模塊化設計，也可以看作是生產過程的單位，執行分立的功能，然后在單位連接在一起，提供多種功能。模塊化設計強調盡量減少元件之間的相互作用，這將使組件設計和制造的獨立于對方。每個組件，模塊化設計，是為了支持一個或多個功能。當部件的結構在一起，形成一個產品，他們將支持較大或一般功能。這表明，必須分析產品的功能和分解成子功能，可滿足不同的功能模塊。模塊化

84、可應用于產品設計，設計上的問題，生產體系，或所有三個。這是最好使用模塊化設計，在所有三種類型在同一時間。</p><p>　　模塊化產品是指產品，滿足不同的整體功能，通過不同的組合構件或模塊。在某種意義上說，整體功能，所完成的產品，可分為分功能，可以執行不同的模塊或組件。一個重要方面，模塊化產品是建立一個基本的核心單位的不同組成部分（單元）可以安裝，從而使各種版本的同一模塊生產。核心應該有足夠的能力來應付所有的變

85、化對于性能和使用。</p><p>　　大多數設計問題都可以分解成一組簡單的易于管理的子問題。有時，復雜的問題減少到容易子問題，在一個小的變化，在解決一個子問題可以導致改變其他子問題的解決方案。這意味著，分解，導致功能依賴子問題。模塊化集中在整個問題分解到職能上獨立子問題，在這種相互依存關系的互動或子問題降到最低程度。因此，改變在解決一個問題可能會導致輕微的修改等問題，也可能不會影響其他子問題。</p>

86、;<p>　　模塊化生產系統中的目標是建設標準化生產系統由模塊化機器。事實上，各種各樣的生產需求存在，導致采用了各種生產機械，以及缺乏就什么積木應。這意味著，沒有標準的模塊化機制。為了建立一個模塊化生產系統，生產機械，必須分為功能組別，從中選擇一個模塊化生產系統，可應對不同的生產要求。羅杰斯分為生產機械分為四個基本群體“原始”的生產要素。這些進程機器原始，運動單位的，模塊化的裝置，并配置的控制單元。有人認為，如果選擇是由這

87、四個類別，將有可能建立一個多元化的高效，自動化和集成生產系統。</p><p><b>　　2．產品開發概況</b></p><p>　　產品開發是一個必要和重要組成部分，活動由一個制造公司。由于制造技術的變化，消費者的喜好，和政府規章（僅舉幾例的影響） ，現有的產品將變得不那么有利可圖隨著時間的推移。銷售量一個典型的產品啟動緩慢，加速，變得扁平，然后逐漸下降。雖然可

88、能有少數產品仍然有利可圖，多年來，公司不斷開發新產品，會產生更多的利潤。產品開發決定了該公司將生產和銷售。這就是說，它試圖設計的產品，客戶將購買和設計制造工藝，以滿足客戶需求的盈利。未作充分準備的決定導致生產開發的產品，沒有人希望購買和產品的制造成本足夠數量。</p><p>　　產品開發過程的關鍵是需要一系列的活動，把一個新產品推向市場。產品開發組織包括工程師，管理人員和其他人員誰使過程和產品工程的決定和執行這

89、些活動。 （請注意，在這一文件中，新產品涵蓋了重新設計現有的產品的。 ）</p><p>　　由于決策正確的決定，需要專門知識和一個組織的人可以在專家的只有少數幾個外，制造企業專注于某一類產品。它的重點關注市場的這一類產品，現有技術生產的類，并規定有關該類別。</p><p>　　像其他地方的企業，產品開發組織，以最大限度地謀求利潤的制造公司遵守有關的監管和道德的制約和其他條件，該公司的所

90、有者征收的基礎上他們的價值觀。產品開發組織是通過定期推出新產品，該公司可以生產，市場和銷售。從根本上說，一個產品開發的組織轉變信息世界（例如，技術，偏好，和規章）納入有關產品和工藝，將產生利潤的公司。它執行這一轉變通過決策（赫爾曼和施密特， 2002年） 。由于設計的問題是非常復雜的，產品開發團隊的問題分解成一個產品開發過程，它提供的機制聯系起來的一系列的設計決定，并沒有明確考慮利潤。</p><p>　　下列9

91、個步驟的主要活動，許多產品開發過程完成（施密特等人。 ， 2002年） ： </p><p>　　第1步，確定客戶的需求。 </p><p>　　第2步，建立了產品規格。 </p><p>　　第3步，確定替代概念設計符合規范。 </p><p>　　第4步，選擇最適合的概念。 </p><p>　　第5步，子系統的設

92、計和整合。 </p><p>　　第6步，建立和測試原型;修改設計的要求。 </p><p>　　第7步，設計和制造模具的生產。 </p><p>　　第8步，生產和銷售該產品。 </p><p>　　第9步，跟蹤該產品在其生命周期，以確定其優勢和弱點。</p><p>　　這份清單（或任何其他說明，使用不同的若干步驟

93、）是一個非常簡單的描述，不僅傳達的范圍，進程，而且還突出強調了內在的（但毫無疑問的）分解。還有許多其他方式來代表產品開發過程和組成部分的任務，包括使用時間表或設計結構矩陣（史密斯和埃平格， 2001年） 。</p><p>　　制造企業認識到，設計決策（盡管年初在產品生命周期）有過多的影響盈利能力的產品在其整個生命周期。因此，產品開發組織已建立和使用并行工程的做法多年（史密斯， 1997年，提供了一個歷史的觀點）

94、 。許多類型的工具和方法（如跨職能的產品開發團隊和面向制造的設計準則）已經建立，通過和實施，以改善決策。庫珀（ 1994年）確定了三個世代的正式辦法，產品開發，所有這些都涉及分解。</p><p>　　應當指出的是，分解不是唯一的方式來描述產品的開發。作為一種替代辦法，以分解系統的設計問題轉化子， Hazelrigg （ 1996 ）建議建立和完善系統的設計模型，以表示詳細設計變量如何影響整個系統的性能。這種做法

95、表明，產品開發過程將結束與利用該模型，以找到最佳的設計。 Hazelrigg （ 1998 ）鼓勵這種類型的優化，但沒有討論的過程中產生的利潤最大化模型。</p><p>　　3. 設計模塊化的方法</p><p>　　三相方法，提出發展的復雜的產品采用模塊化的概念。擬議的方法符合標準所規定的功能設計，裝配和制造。一些重大的好處與此相關的方法包括：</p><p>

96、;　　(1) 提高設計精度，效率和重用現有設計的新程序。</p><p>　　(2) 潛在的一體化開發方法和技術納入工程設計活動。</p><p>　　(3) 模塊化產品設計和規劃過程中的生產都整合在一個整體工程過程中，產品功能映射到其可行進程在一個接一個的通信中。</p><p>　　為了實施這一概念成功，以何種方式在選定的單元是至關重要的。通過建立簡單的接口模塊

97、，數字互動，然后減少。步驟與此相關的方法包括： </p><p>　　第一階段-分解分析：模塊化設計和分類</p><p>　　(1) 產品和解決問題的分解。 </p><p>　　(2) 結構和模塊化分解。 </p><p>　　(3) 相互之間的相關性分析的組成部分和規范。 </p><p>　　(4) 應用成組技

98、術分類系統。 </p><p>　　(5) 建設結合措施矩陣。 </p><p>　　(6) 優選模塊。 </p><p>　　第二階段-產品分析：面向裝配的設計和功能分析</p><p>　　(1) 識別元件，可分別生產和組裝。 </p><p>　　(2) 確定的順序拆卸和組裝的每個分部分模塊。 </p>

99、;<p>　　(3) 建立界面進行分析的基礎上的設計特點。 </p><p>　　(4) 確定的秩序，其中組件組裝生產的最終產品。 </p><p>　　第三階段-過程分析：設計制造</p><p>　　(1) 家庭身份和模板檢索。 </p><p>　　(2) 測定的邏輯順序燃?xì)廨啓C(jī)守則的進程模塊。 </p>&

100、lt;p>　　(3) 機械和工藝參數的計算方法。 </p><p>　　(4) 不同的程序規劃。</p><p>　　4. 分解分析：模塊化設計和分類 </p><p>　　第一階段的方法進一步規范與此相關的階段說明如下：</p><p><b>　　4.1. 需求分析</b></p><p&g

101、t;　　設計工程師通常有一個不清楚的問題。在許多情形中，設計者必須回應只提議「有對一種產品的需要運行一個特定的功能」。主要任務之一將精確地發現什么是需要和什么真的做客戶需要。設計的一個重要的步驟將根據功能的需要和身體的限制完全描述產品。這些功能的需要和身體的限制將會形成產品規格。測量預期的買方或客戶會收集必需識別客戶需要的數據。引導建立市場和客戶能做這的目標的從一項行銷研究開始的。然后客戶的需要和需要可能被獲得被使用一些方法，像是面談和