機械專業畢業設計中英文翻譯--對照免耕播種機鋸切防堵裝

1、<p>　　螃袁莆薀蠆袀蒈莃羈罿膈薈襖羈芀莁螀羇蒃薇螆羆膂葿螞羆芅蚅羀羅莇蒈袆羄葿蚃螂羃腿蒆蚈肂芁蟻薄肁莃蒄袃肀肅蝕衿肀芅薃螅聿莈螈蟻肈蒀薁羀肇膀莄袆肆節蕿螂膅莄莂蚈膄肄薇薃膄芆莀羂膃荿蚆袈膂蒁葿螄膁膀蚄蝕膀芃蕆罿艿蒞螞裊羋蕆蒅螁羋膇蟻蚇襖荿蒃蚃袃蒂蝿羈袂膁薂袇袂芄螇螃袁莆薀蠆袀蒈莃羈罿膈薈襖羈芀莁螀羇蒃薇螆羆膂葿螞羆芅蚅羀羅莇蒈袆羄葿蚃螂羃腿蒆蚈肂芁蟻薄肁莃蒄袃肀肅蝕衿肀芅薃螅聿莈螈蟻肈蒀薁羀肇膀莄袆肆節蕿螂膅莄莂蚈膄肄薇薃

2、膄芆莀羂膃荿蚆袈膂蒁葿螄膁膀蚄蝕膀芃蕆罿艿蒞螞裊羋蕆蒅螁羋膇蟻蚇襖荿蒃蚃袃蒂蝿羈袂膁薂袇袂芄螇螃袁莆薀蠆袀蒈莃羈罿膈薈襖羈芀莁螀羇蒃薇螆羆膂葿螞羆芅蚅羀羅莇蒈袆羄葿蚃螂羃腿蒆蚈肂芁蟻薄肁莃蒄袃肀肅蝕衿肀芅薃螅聿莈螈蟻肈蒀薁羀肇膀莄袆肆節蕿螂膅莄莂蚈膄肄薇薃膄芆莀羂膃荿蚆袈膂蒁葿螄膁膀蚄蝕膀芃蕆罿艿蒞螞裊羋蕆蒅螁羋膇蟻蚇襖荿蒃蚃袃蒂蝿羈袂膁薂袇袂芄螇螃袁莆薀蠆袀蒈莃羈罿膈薈襖羈芀莁螀羇蒃薇螆羆膂葿螞羆芅蚅羀羅莇蒈袆羄葿蚃螂羃腿蒆蚈肂芁蟻薄

3、肁莃蒄袃肀肅蝕衿肀芅薃螅聿莈螈蟻肈蒀薁羀肇膀莄袆肆節蕿螂膅莄莂蚈膄肄薇薃膄芆莀羂膃荿蚆袈膂蒁葿螄膁膀蚄蝕膀芃蕆罿艿蒞螞裊羋蕆蒅螁羋膇蟻蚇襖荿蒃</p><p>　　Design of sawing anti-blocking mechanism for</p><p>　　no-tillage planter and its cutting mechanism</p><

4、;p>　　Liao Qingxi1,Gao Huanwen2,Shu Caixia1</p><p>　　(1.Engineering and Technology College,Huazhong Agricultural University,Wuhan430070,China;</p><p>　　2.Engineering College,China Agricultural

5、 University,Beijing100083,China)</p><p>　　Abstract: Based on blocking issues of no-tillage planter for dry-land farming in two-crop-a-year region in North of China and shortcomings of anti-blocking mechanism

6、 developed, such as higher rotation speed (above 1500 r/min) and bigger power consumption (width power consumption per unit up to 16～41.74 kW/m, including traction power), a new sawing anti-blocking mechanism was develop

7、ed and its cutting mechanism was investigated in this paper. Meanwhile stress distribution of the saw-tooth blade c</p><p>　　Key words: no-tillage planter; sawing anti-blocking mechanism; cutting mechanism;

8、cutting rate</p><p>　　CLC number: S223.2　　　　Document code: A　　　　Article ID:1002-6819(2003)05-0064-07</p><p>　　Received date:2003-06-15</p><p>　　1　Introduction</p><p>　　

9、Anti-blocking issue of no-tillage planter had become one of the key factors affecting production efficiency and seeding quality of two-crop-a-year region in North of China. It was because there was a great deal of crop s

10、tubbles and crop seeding was started shortly after crop had been harvested, leaving no time for crop stubbles to decay. At present, there are two methods to solve anti-blocking issue of no-tillage: 1) Straws were chopped

11、 by the straw chopper before seeding, it would lead to addin</p><p>　　It was reported that the blade base linear velocity of several main straw chopping mechanisms was between 37～56 m/s[2], mostly chopping m

12、echanism combined with cutting and striking had higher striking velocity and higher power consumption[3], e.g. the blade base linear velocity up to 34 m/s could obtain fine cutting effect for corn straws[4], and 24 m/s o

13、n rice and wheat straws by supporting pole, respectively[5]. Even if corn straws were cut by sliding cut with vertical blade, its velocity of c</p><p>　　Based on practical problems, the objective in this pap

14、er is to find a way to solve the shortcoming that it 64 is difficult for common smooth blade to seize straws and it must run at higher rotation speed, decrease power consumption and improve cutting effect as well as anti

15、-blocking performance of no-tillage planter. Additionally some experiments were done by selecting saw-tooth as cutting blade of no-tillage planter and cutting mechanism of the sawing anti-blocking mechanism was investiga

16、ted.</p><p>　　2　Structure and cutting rule of the sawing anti-blocking mechanism</p><p>　　2.1　Structure and characteristics</p><p>　　The sawing anti-blocking mechanism was made up o

17、f saw-tooth blade, throwing ban device, principal shaft, moved and fixed blade combination, covering shell, opener and working frame as well as transmission system. Sketch of the sawing anti-blocking mechanism is shown i

18、n Fig. 1. The main parts included saw-tooth blade, throwing ban device as well as fixed blade combinations. Diameter of saw-tooth with 60 teeth was 350 mm; throwing ban device with max 270 mm turning diameter was fixed o

19、n between ad</p><p>　　2.2　Cutting principle</p><p>　　The sawing anti-blocking mechanism was driven to reverse rotation by power. First, straws were cut in no-sustaining mode by saw-tooth blades

20、while saw-tooth blades touched straws, then after straws were completely cut down, they would be free and be thrown to the rear of opener by throwing ban device and inertial force. Second, straws not being completely cut

21、 down would be thrown to former upward and be cut in sustaining mode by fixed blade combinations until any of straws would be cut down, st</p><p>　　Working procedures of the sawing anti-blocking mechanism w

22、ere as follows: 1) no-sustaining cut phase: static straws relative to ground were cut firstly atNpoint by saw-tooth blades, then, straws would be cut down completely or embedded in saw-tooth. Straws being cut down compl

23、etely would be free and 65　Liao Qingxi et al: Design of anti-blocking mechanism for no-tillage planter dropped into adjacent saw-tooth; 2) dragging and delivering phase: after straws dropped into adjacent saw-tooth, they

24、 w</p><p>　　4)throwing phase: straws being cut down were thrown directly to the rear of opener by tooth former slanting angle of the saw-tooth and throwing ban device, time and again, straws would be carried

25、 out continuously to cut and throw. The working principle of the sawing anti-blocking mechanism is shown in Fig.2.</p><p>　　2.3　Analysis of mechanics characteristics of saw-tooth blade </p><p>　

26、　Cutting properties of saw-tooth to cut straws belong to wriggly cut of no-metal materials, its ultimate objective is not only to improve surface cutting quality, but also to raise cutting efficiency, so it can decrease

27、sawing force and power consumption[9]. Because the ratio of its diameter 350 mm to its thickness 1.8 mm is over 150, the saw-tooth blade belongs to exceed thin disc. It is as plane stress and no-axis symmetry problem acc

28、ording to elasticity theory. And because the saw-tooth blade </p><p>　　The stress distribution of the saw-tooth blade was calculated by the ANASYS finity element software. Number of the tooth participating i

29、n cutting straws was determined to 2～3 teeth while diameter of straws was in 20～45 mm[11]. The saw-tooth made in 65Mn ofEequal to 210 GPa[12]andμto 0.28 was separated into 1200 cells and 1260 nodes by trapezia gridding.

30、Thus the stress distributions ofX,YandXYplane had been obtained by the ANASYS software according to the most average wring value 26.8 Nm[13]of t</p><p>　　3　Materials and method</p><p>　　3.1　Expe

31、rimental equipment</p><p>　　The experiment was conducted in the soil bin device, of 20m-long, 0.89m-wide, 0.6m-high, the available working journey of vehicle was 16 m, and the working velocity of vehicle was

32、 from 0.12 m/s to 1.2 m/s. And other equipment included: AKC-205 type wring sensor, the sawing anti-blocking mechani-sm, control tank, computer operation platform, etc.</p><p>　　3.2　Experimental materials<

33、;/p><p>　　The average height and diameter of corn straw is 2.25 m, 25. 6 mm, respectively. It is made up of leaves and skin and marrow. The weight of leaves and marrow occupy above 55% of whole straw and their

34、mechanical intension are much lower; and the weight of skin made up of scarfskin and bunchy organization occupy 35% or so, the mechanical intension of skin is much higher up to 90 MPa of portrait resistant pulling intens

35、ion and 3 MPa of landscape orientation resistant pulling intension by measuremen</p><p>　　3.3　Experimental methods</p><p>　　The sawing anti-blocking mechanism was hung up in the soil bin device,

36、 and its ascending was controlled by hydraulic pressure system, and the wringM measured by wring sensor was automatically noted in computer, repeat three times, and then the power consumption could be calculated by expre

37、ssionP=M×n/9549, the cutting rateηcould be calculated by expressionη= (G-G0)/G×100%, where,G——the total mass of effective width/kg,G0——total mass of the straws cut down between adjacent openers.</p><

38、p>　　4　Results and discussion</p><p>　　4.1　Experiments and analysis of rotation direction of the saw-tooth blade for cutting quality</p><p>　　Some experiments were done by clockwise and counte

39、r-clockwise rotation of the saw-tooth blade in the soil bin device. The results are listed in Table 1. </p><p>　　Table 1　Experimental results of rotation direction of the saw-tooth blade</p><p>

40、　　Table 1 showed that the way of cutting straws at counter-clockwise rotation would be of benefit to improve cutting quality and throwing effect, and boost up adaptability of weight of different stubble mulch. Therefore,

41、 counter-clockwise rotation direction of the saw-tooth blade had been determined.</p><p>　　4.2　Effect of the rotation speed on cutting quality</p><p>　　The experiments were done by selecting vel

42、ocity 0.3 m/s of vehicle and interval 5 mm of the moved and fixed blade, and spacing 20 mm between the saw-tooth and ground as well as weight 11250 kg/hm2of the straws mulch, experimental results are shown in Fig.4. The

43、results indicated that the power consump-tion and cutting rate would increase with rising of rotation speed of the saw-tooth blade. Because the wring values of cutting straws were equal basically on the same working cond

44、ition, the cutting</p><p>　　Fig.4　Relationships among rotation speed, cutting rate and power consumption</p><p>　　4.3　Effect of the straw moisture on cutting quality</p><p>　　The st

45、raw moisture of the same crops is different for different autumn and reaping time. The moisture were 20%, 40.5%, 64.4% and 80.16% respectively, after corn straws had been placed in field for different periods. Experiment

46、s were done by selecting velocity 0.3 m/s of vehicle and interval 5 mm between the moved and fixed blade and spacing 20 mm between sawtooth and ground, and rotation speed 650 r/min as well as mass 11250 kg/hm2of straws m

47、ulch, the results were shown in Fig.5. Fig.5　Results o</p><p>　　Experimental results show that power consumption decreased with increasing of straw moisture and cutting rate of straws increased with increasi

48、ng of straws moisture on the same working condition, which had connected importantly with different moisture of straws. Straws would take on bigger hardness and best firmness and fine brittleness when straws moisture was

49、 in higher, which demonstrated that it had been easy to finish to cut straws. But straws would take on tired and soft status for fine fle</p><p>　　tearing while straw moisture was up to 20%(Fig.7). </p&g

50、t;<p>　　4.4Effect of interval between the fixed and moved blade and velocity of vehicle on cutting quality</p><p>　　Experiments were done by selecting velocity 0.3 m/s of the vehicle and spacing 20 mm

51、 between saw-tooth and ground, and rotation speed 650 r/min as well as weight 11250 kg/hm2of the straws mulch, experimental results are shown in Fig.8. The results proved that power consumption increased with increasing

52、of velocity of vehicle on the same working condition. The power consumption increased with increasing interval between the fixed and moved blade and no fixed blade, at the same time, power consump</p><p>　　i

53、n that straws would be cut down completely while the small interval between the fixed and moved blade, the bigger interval between the fixed and moved blade or near diameter of corn straws, corn straws could be embedded

54、into saw-tooth and participated in cutting again, so feeding quantities of straws were increased. And straws could not be cut down completely which brought to rearing phenomenon. The cutting rate of 68 Vol.19, No.5 Trans

55、actions of the CSAE Sept.2003　 straws decreased with increa</p><p>　　5　Conclusions</p><p>　　1) A new type of sawing anti-blocking mechanism, which could get rid of some shortcoming that common s

56、mooth blade is difficult to seize straws as well as high rotation speed, was designed according to the anti-blocking requirements of no-tillage planter and need in practice. The sawing anti-blocking mechanism had strong

57、capability to seize straws and lower rotation (650 r/min) speed and lower consumption (power consumption per unit width up to 2.95 kW/m) and higher cutting rate of straws, a new </p><p>　　2) The stress distr

58、ibution of the saw-tooth blade was calculated by the ANASYS finity element software. The results showed that its intension would be difficult to be destroyed and the sawtooth blade was feasible to cut corn straws.</p&

59、gt;<p>　　3) The sawing anti-blocking mechanism realized an integrated function of directly throwing and cutting straws by counter-clockwise. The straws could be cut down completely by two cutting modes of sustaini

60、ng and no-sustaining cut. Meanwhile, the straws being cut down completely could be directly thrown to the rear of opener by the former tooth horn of sawtooth blade and throwing ban device.</p><p>　　4) Experi

61、mental results showed in the soil bin device that: (1) Cutting rate of straws increased with increasing of rotation speed of saw-tooth blade and moisture of straws, and higher moisture of straws would be of benefit to im

62、prove cutting quality; (2) Power consumption increases along with increasing of rotation speed, and that decreased with increasing of moisture of straws; ( 3 ) Cutting rate of straws decreased with increasing of velocity

63、 of the vehicle while interval between the fixed an</p><p>　　Compared with the other driving anti-blocking mechanism, the theoretical analysis and experimental results showed that the sawing anti-blocking me

64、chanism had better capability to cut and lower rotate speed and power consumption as well as stronger suitability for different stubbles mulch. </p><p>　　[References]</p><p>　　[1]　Zhang Jinguo,

65、Gao Huanwen. Study on the strip chopping anti-blocking mechanism[J]. Transactions of the Chinese Society of Agricultural Machinery, 2000,31(4):33～35(in Chinese).</p><p>　　[2]　Luan Yuzhen, Tian Hongwei. Resea

66、rch on performance and matched pattern of chopper for cornstalk and root[J]. Transactions of Jilin Agriculture University,1991,13(3): 65～68(in Chinese).</p><p>　　[3]　Mao Hanping, Chen Cuiying. Research statu

67、s of the straw chopper[J]. Transactions of the Chinese Society of</p><p>　　Agricultural Machinery, 1996, 12 ( 2 ): 152～154 (in Chinese).</p><p>　　[4]　Mao Hanping, Chen Cuiying. Analysis of worki

68、ng mechanism and parameters of the straw chopper [J]. Transactions of the CSAE, 1995, 11 (4): 62～66 (in Chinese).</p><p>　　[5]　Wu Fengsheng, Jin Mei. Design of 4Q—31 chopper mechanism for rice and wheat stal

69、k[J]. Transactions of</p><p>　　the CSAE,1998,14(3):248～250(in Chinese).</p><p>　　[6]　Wu Ziyue, Gao Huanwen, Zhang Jinguo. Study on 69　Liao Qingxi et al: Design of anti-blocking mechanism for no-

70、tillage planter cutting velocity and power requirement in a maize stalk chopping process[J]. Transactions of the Chinese Society of Agricultural Machinery, 2001, 32 (2): 38～41 (in Chinese).</p><p>　　[7]　Li J

71、inyi, Wang Xiangfa. Cutting mechanism of forage harvester [ J ]. Agriculture Machinery and Food</p><p>　　Machinery,1995(4):19～20(in Chinese).</p><p>　　[8]　Woodworker Machinery Compiled Group. Wo

72、odworkermachinery [ M ]. Beijing: China Forest Publishing Company,1998(in Chinese).</p><p>　　[9]　Zhou Canfeng, Chen Qingshou, Li Zuguang. Randomness of sawing forces and wear blade [J]. Explore Mine</p>

73、;<p>　　Engineering,2000,(2):52～55(in Chinese).</p><p>　　[10]　Wang Longbu. Elasticity theory[M]. Beijing: Science Publishing Company, 1979(in Chinese).</p><p>　　[11]　Liao Qingxi, Gao Huanw

74、en. Experimental study on anti-blocking mechanism of the sawing anti-blocking</p><p>　　mechanism for no-tillage planter [J]. Transactions of China Agricultural University, 2003, (4): 45～48 (in</p><

75、;p><b>　　Chinese).</b></p><p>　　[12]　Zhou Kaiqin. Handbook of mechanical parts [ M ]. Beijing:Advanced Education Publishing Company, 1994.</p><p>　　[13]　Liao Qingxi, Gao Huanwen. E

76、xperimental study on the sawing anti-blocking mechanism for no-tillage planter [J]. Transactions of the Chinese Society of Agricultural</p><p>　　Machinery,2003(6):to be published(in Chinese).</p><

77、p>　　[14]　Yang Zhongpin, Yang Linqing, Guo Kangquan. A preliminary study on the technology of making cornstalk cuticles particleboard[J]. Transactions of Northwestern Agricultural University, 1995, 10 ( 3 ): 67～72 ( in

78、 Chinese).</p><p>　　免耕播種機鋸切防堵裝置設計及其切割機理的研究</p><p>　　廖慶喜‘，高煥文2，舒彩霞</p><p>　　（1.華中農業人學工程技術學院，武漢430070; 2. （中國農業大學工學院，北京 100083）</p><p>　　摘要:針對我國北方旱地一年兩熟地區免耕播種機堵塞現象和已

79、有卞動式防堵裝置轉速高( 1500 r/ min以上)、功耗人 (單位幅寬達16- 41.74 kW/m，含牽引功率)的現實問題，設計了一種新型免耕播種機鋸切防堵裝置，分析了該裝置的切割機理，應用有限元ANSYS軟件計算了鋸齒圓盤切刀的應力分布，得出了鋸齒圓盤切刀川于玉米秸稈切割的可行性。上槽試驗表明:1)該裝置采用逆轉式作業，兼有無支撐和有支撐兩種切割方式，切割徹底，并能借助刀齒前角和拋撒板將已切斷秸稈定向拋送到開溝器后方，實現了切割

80、、定向拋撒一體化功能;2)秸稈切碎率隨轉速和秸稈含水率的增人而增人，秸稈含水率高時有利于提高切割質量;3)秸稈切碎率在動定刀間隙一定時，隨前進速度增人而降低，小間隙時無漏切和撕皮現象，切害日質量高，功耗小。理論和試驗結果表明:與其他卞動式防堵裝置相比，鋸切防堵裝置具有良好的切害少h'}能，其轉速低 (650 r/min)、功耗小(單位幅寬為2.95 kW/m)、秸稈覆蓋量適應性強，為改善免耕播種機防堵性能提供了一條新途徑。<

81、;/p><p>　　關鍵詞:免耕播種機;鋸切防堵裝置;切割機理;切碎率</p><p>　　免耕播種機鋸切防堵裝置設計及其切割機理的研究</p><p>　　廖慶喜1，高煥文2，舒彩霞</p><p>　?。?.華中農業人學工程技術學院，武漢430070; 2. （中國農業大學工學院，北京 100083）</p><p

82、>　　摘要:針對我國北方旱地一年兩熟地區免耕播種機堵塞現象和已有卞動式防堵裝置轉速高( 1500 r/ min以上)、功耗大 (單位幅寬達16- 41.74 kW/m，含牽引功率)的現實問題，設計了一種新型免耕播種機鋸切防堵裝置，分析了該裝置的切割機理，應用有限元ANSYS軟件計算了鋸齒圓盤切刀的應力分布，得出了鋸齒圓盤切刀川于玉米秸稈切割的可行性。上述試驗表明:1)該裝置采用逆轉式作業，兼有無支撐和有支撐兩種切割方式，切割徹底，

83、并能借助刀齒前角和拋撒板將已切斷秸稈定向拋送到開溝器后方，實現了切割、定向拋撒一體化功能;2)秸稈切碎率隨轉速和秸稈含水率的增大而增大，秸稈含水率高時有利于提高切割質量;3)秸稈切碎率在動定刀間隙一定時，隨前進速度增大而降低，小間隙時無漏切和撕皮現象，切割質量高，功耗小。理論和試驗結果表明:與其他卞動式防堵裝置相比，鋸切防堵裝置具有良好的切割性能，其轉速低 (650 r/min)、功耗小(單位幅寬為2.95 kW/m)、秸稈覆蓋量適應性

84、強，為改善免耕播種機防堵性能提供了一條新途徑。</p><p>　　關鍵詞:免耕播種機;鋸切防堵裝置;切割機理;切碎率</p><p>　　中圖分類號：S223 文獻標識碼：A </p><p>　　文章編號：1002-6819(2003)05-0064-07 收稿日期：2003-06-1

85、5</p><p><b>　　1、 說明</b></p><p>　　免耕播種機堵塞問題是影響我國一年兩熟的北方旱地地區的生產效率和播種質量關鍵因素之一。這是因?yàn)橛写罅康淖魑锔缍以谧魑锸崭畈痪镁鸵M(jìn)行播種，不留時間使作物根茬腐爛。目前，有兩種方法來解決免耕播種機的堵塞問題：1）在播種前用秸稈刀切碎秸稈，這將導致增加的工作程序，并增加生產成本，以及推遲播期; 2）

86、茬被安裝在免耕播種機上的切除機構清除，如在河北農哈哈機械有限公司的紡紗地帶和溝小麥播種機和中國產農業大學[ 1 ]的2BMDF玉米地帶等等。在實踐中，駕駛砍機制在防堵問題上有巨大作用，但是因?yàn)榻斩捛兴闀r(shí)的高轉速，會產生更大的振動和噪聲以及降低安全。</p><p>　　據報道，幾個主要秸稈切碎機制的刀片基礎線速度是37 ? 56米/秒[ 2 ] ，其中大部分是砧板機制結合切割突出了更高的驚人速度和更高的功率消耗[

87、 3 ] ，例如：刀片基礎線速度高達34米/秒能取得削減玉米秸稈的良好效果[ 4 ] ，而大米和小麥秸稈高達24米/秒 [ 5 ] 。即使玉米秸稈被與與垂直的滑動切口相切，其切割一個和兩三個秸稈的速度必須上升到10.3米/秒， 13.6米/秒， 15.8米/秒[ 6 ] ，并且有較高的功率消耗。簡言之,因?yàn)轳{駛砍機制目前開發有高旋轉速度(上面 1500轉/分 )并且更高的力量消費(寬度單位能耗高達16 ? 41.74千瓦/米，包括牽引動

88、力),在實踐中以減少旋轉速度和力量消費將是迫切的.</p><p>　　根據實際問題，本文件中的目標是要找到一種辦法來解決64個缺陷，制造出對抓住稻草并且它必須在更高的旋轉速度下，減少能耗和提高切割效果以及防堵性能免耕播種機。另外一些實驗，對選擇了齒形切削刀片的免耕播種機和切削機理的鋸切防堵機制進行了研究。</p><p>　　2結構和規則的鋸切防堵裝置的切割原理</p>&

89、lt;p><b>　　2.1結構和特性</b></p><p>　　鋸切防堵裝置由鋸齒圓盤切刀、定刀組合、拋撒板、主軸、罩殼、機架、以及傳動系統組成。鋸切防堵裝置的零件圖如圖1.其中鋸齒圓盤切刀、拋撒板、和定刀組合是該裝置的主要組成部分。設計的鋸齒圓盤直徑為350 mm,60齒;拋撒板安裝在相鄰兩鋸齒圓盤間,其最大回轉直徑為270 mm;定刀組合由鋸齒形定刀和直刀形定刀組合而成,鋸齒形

90、定刀與鋸齒圓盤切刀配合對秸稈進行剪切,而直刀形定刀主要起阻擋未切斷秸稈落入拋撒區的作用,同時也參與剪切。該裝置安裝在土槽試驗臺上,工作幅寬為600 mm，相鄰間隔為200毫米。其工作特點是秸稈既可由鋸齒切刀直接切碎,也可由鋸齒切刀和定刀組合作用而切碎,兼有無支撐與有支撐2種切割方式,鋸齒刀端線速度低于甩刀式切割器線速度,即具有將高速砍切變?yōu)榈退黉徢械奶攸c(diǎn)。</p><p>　　開溝鏟組合; 2.鋸齒圓盤切刀;

91、 3.秸稈導向板; 4.定刀組合; 5.主軸; 6.拋散弧板；</p><p>　　7.罩殼; 8.機架; 9.軸承座; 10.傳感器; 11.電纜; 12.調速電機; 13.臺車懸掛臂</p><p>　　圖1　鋸齒防堵裝置結構示意圖</p><p><b>　　2.2切割原理</b></p&g

92、t;<p>　　鋸齒圓盤切刀由動力驅動作逆時針旋轉。首先，當鋸齒底部與秸稈接觸時,鋸齒嵌住秸稈進行無支撐切割,已切斷的秸稈,依靠鋸齒圓盤切刀的刀齒和拋撒板的旋轉作用向后拋送。其次，未完全切斷的秸桿在刀齒作用下,向前上方運動與定刀組合發生剪切作用,秸稈進行有支撐切割,從而完成秸稈的全部切斷,由鋸齒切刀和拋散板將斷稈拋送到開溝器后方。如此反復,實現秸桿的連續切割和拋送。工作時圓盤鋸齒不入土,其旋轉最低點離地15~30 mm。就

93、田間垂直存在的秸稈的散布情況或某個角度的前進方向而言，鋸切防堵裝置的橫向的鋸齒是為了減少重復切割、漏割和撕裂稻谷。</p><p>　　鋸切防堵裝置的工作程序制如下：1）無支撐切割階段：相對地面靜止的稻草首先被鋸齒片切割，然后秸稈被完全切除或牢牢嵌入鋸齒中。已切斷的秸稈做自由運動并落到鄰近的鋸齒上; 2 )拖拽交付階段:在稻草落下了相鄰近的鋸牙齒以后，他們將被拋灑裝置向上扔到前者,而且，被嵌入鋸牙齒的稻草將被更高

94、的速度旋轉的鋸牙齒向前拋出; 3 )支撐切階段:在無支撐階段未被切割的稻草被定刀組合切割直到被完全切割。4 )拋撒階段:正在被切割的稻草直接被鋸齒圓盤切刀和拋散弧板扔到開溝器的后面,再一次,稻草將被連續地切割和拋撒。鋸切防堵裝置的工作的原理如圖2所示</p><p>　　1.待切秸稈; 2.定刀組合; 3.罩殼; 4.鋸齒圓盤切刀; 5.拋撒板;</p><p>　　6.開

95、溝器; 7.斷稈; 8.地表; 9.放大定刀組合; 10.鋸齒型定刀;</p><p>　　N為無支撐切割點;K為支撐切割點;M為研究對象</p><p>　　圖2　鋸齒防堵裝置防堵原理示意圖</p><p>　　2.3鋸齒圓盤切刀的力學性能</p><p>　　切割秸稈的鋸齒圓盤切刀的切割特性屬于無金屬材料蠕動切割,它的最終

96、的目的是不僅提供切割表面的質量,而且提高切碎效率，因此它能減少切削力和能量的消耗[ 9 ].因?yàn)樗?50毫米的直徑與它1.8毫米的厚度的比值超過了150 ,鋸齒圓盤切刀屬于超過薄圓盤。它是根據彈性理論的水平壓力和無軸對稱問題。并且因?yàn)殇忼X圓盤切刀是，由凸緣托盤緊縮,它的中心洞的6個自由被限制,因此它的中心部件被認作完全約束而沒有任何旋轉和移動。.鋸齒圓盤切刀屬于過度的切刀工具,在秸稈切割中它使其達到非傳統的切割力，主要原因如下：1 )內

97、空并且外硬的稻草結構決定了微硬部分的差異分布,因此單個鋸齒的力在切稻草時是不明確的; 2 ) 因?yàn)殇忼X圓盤切刀的鋸齒不連續所以鋸齒圓盤切刀的全部的切削力在水平方向?qū)⒉淮_定。這些選擇特征將使鋸齒圓盤切刀變得更理想，而且這些理想特性大小要與外部承受載荷上的承載特性和鋸齒圓盤切刀尺寸相比較。因此為保證切割的平穩需弄清鋸齒圓盤切刀所受的力。</p><p>　　圖3 鋸齒圓盤切刀的壓力分布</p><

98、;p>　　鋸齒圓盤切刀的壓力分布由有限元ANSYS軟件計算評估。當秸稈直徑在20~45毫米時參與切割秸稈的齒數一般為2~3個[11].由E等于210Gpa[12] 、μ為0.28的25Mn制成的鋸齒圓盤切刀被分成1200隔間和1260個小節。這樣ANASYS 軟件根據鋸齒圓盤切刀切割秸稈26.8牛米的最平均扭矩 [ 13 ]的擰傳感器就獲得了X,Y和XY平面的力的分布，計算結果如下：1）看到鋸齒圓盤切刀曾擔任替代從整體應力分布的鋸

99、齒波，牙齒和周圍中心孔的鋸齒波已分發給主應力，最大壓應力達70776帕，此外，最大的拉應力高達19945帕。與鋸齒圓盤切刀735兆帕產量疲勞內涵[ 12 ]相比，該鋸齒圓盤切刀很難被摧毀，因此削減玉米秸稈是可行的; 2 ）圖3顯示，鋸齒圓盤切刀的應力是對稱分布的，相對更壓力的區域只占整體的3.33 ％，其他占96.67 ％；3 ）在前齒首先接觸秸稈時，鋸齒圓盤切刀的前牙的承受最大的力，其應力值在切削秸稈前最小，可是當開始切斷秸稈時，應力