摘要翻譯--hbt40c-1008d混凝土拖泵液壓系統設計

1、<p><b>　　摘要</b></p><p>　　拖式混凝土泵大量運用于城鎮建設、路橋建設、水利水電、隧道建設等施工現場。隨著在工程中應用的越來越廣，對其控制的精度、穩定性和工作效率等提出了更高的要求。</p><p>　　為了解決上述控制方面的問題，本課題對其液壓控制部分進行了設計。為了滿足控制的穩定性，將液壓系統主要分為了兩個相對獨立的部分，分別控制

2、主泵送和S管的擺動，另外還對其攪拌回路進行了設計。這三個系統再加上其他輔助系統就形成了混凝土拖泵HBT40C-1008D的液壓系統。</p><p>　　機械部分主要對泵送系統進行設計分析，在我的設計中主要設計的是泵送油缸，在設計泵送油缸之前，先對整個液壓系統進行工況分析，編制負載圖，選定系統的工作壓力，然后根據使用要求選擇結構類型，按負載情況、運動要求、最大行程等確定其主要工作尺寸，進行強度、穩定性和緩沖驗算，

3、最后再進行結構設計。</p><p>　　關鍵詞 混凝土拖泵；液壓系統；泵送系統；分配系統；攪拌系統</p><p><b>　　Abstract</b></p><p>　　Tow Concrete Pump has been used largely in urban construction, road and bridge const

4、ruction, water conservancy, hydropower, tunnel construction and so on. With the increasingly wide application in engineering, the requirement of its control accuracy, stability and efficiency of the proposed has become h

5、igher. </p><p>　　In order to address these control problems above-mentioned, the subject has designed the hydraulic control parts. To meet the stability control, the hydraulic system is divided into two rela

6、tively independent parts, namely, control of the main pump and swing Stube, in addition to its mixing circuit is designed. These three systems together with other auxiliary systems to form a movable pumps, distributed HB

7、T40C-1008D the hydraulic system. </p><p>　　Mechanical part of the main pumping system were designed and analysed, the pumping tanks is designed mainly in my design, fuel tanks in the design of pumping before

8、 the entire hydraulic system condition analysis, preparation of the load chart, the selected system the working pressure, and then select the structure type according to application requirements, workloads situation, exe

9、rcise requirements, maximum stroke of confirmed its main dimensions, the strength, stability and cushioning checking</p><p>　　Key word: concrete pump; hydraulic system; pumping system; distribution system; m