本科畢業論文-基于液壓夾緊的專用夾具設計——支架零件的工藝工裝設計

1、編 號無錫太湖學院畢 業 設 計 （ 論 文 ）題目： 題目： 基于液壓夾緊的專用夾具設計 基于液壓夾緊的專用夾具設計 ——支架零件的工藝工裝設計 支架零件的工藝工裝設計 信 機 系 機 械 工 程 及 自 動 化 專 業學 號： 學生姓名： 指導教師： （職稱：副教授 ）（

2、職稱： ）2013 年 5 月 25 日AbstractThis article is carries on the design of the bracket components machine process, and the clamp designed based on the hydraulic pressure which aimed at some working process, and has car

3、ried on another working procedure ordinary jig design. The bracket components take the boom trestle class components, its main processing surface is the plane and the hole. According to the machine-finishing technologica

4、l requirement, after following the first surface, the hole principle, and is clear about the hole and the plane processing divides the rough machining and the precision work stage guarantees the working accuracy. The dat

5、um choice takes the thick datum by the support big outer annulus end surface, takes the fine datum by the support big outer annulus end surface with two craft holes, had determined in its processing's craft route and

6、 the processing needs each technological parameter. And according to request to a working procedure has carried on based on the hydraulic pressure clamp unit clamp design. Entire processing process chooses all-purpose ma