計算機專業外文翻譯----一種新型的移動ad_hoc網絡跨層服務質量模型

1、<p>　　一種新型的移動AD HOC網絡跨層服務質量模型 王磊春，陳實宏，肖坤，胡瑞敏         國家多媒體軟件工程研究的中心，，武漢大學          &#

2、160;            武漢430072 ，中國，湖北                     &#

3、160;電子郵件： wlc2345702@163.com 摘要</p><p>　　分層協議的體系結構只能為移動Ad Hoc網絡（簡稱MANETs ）提供部分堆棧。這給移動Ad Hoc網絡中的多媒體通信的質量保證帶來了很大的困難。為了改進移動Ad Hoc網絡中的多媒體信息傳輸?shù)姆召|(zhì)量，本文將介紹一種針對移動Ad Hoc網絡的跨層服務質量模型—-CQMM。CQMM的一個核心組件是網絡狀態儲存庫(NSR)，它是信

4、息交換的中心，而且能在堆棧中的不同協議層之間共享。同時，CQMM能夠實現所有標準的QoS 控制。另外，CQMM還能消除堆棧中不同協議層之間的冗余功能，并有效的執行QoS控制和網絡性能的全面改善。</p><p>　　關鍵字 跨層QoS模型，移動Ad Hoc網絡（MANETs） ，網絡狀態儲存庫（NSR），QoS控制。</p><p>　　1、 引言隨著多媒體技術的快速發展，和個人通信帶

5、寬的增加，音頻和視頻服務已開始在MANETs中出現。與靜態網絡和因特網不同的是，MANETs中的多媒體通信，如音頻和視頻服務，它們對QoS的保證有非常嚴的要求，特別是延遲的保證。此外，具有不同QoS要求用戶之間的通信可以集成服務。這給MANETs.多媒體通信的QoS保證提出了很大的挑戰。主要有兩個原因：1 ）MANETs是在一種傳統的無線環境下運行的，即，該環境隨時間而變化，具有不可靠的物理鏈接、廣播頻道和動態的有限的帶寬，等等。因此，

6、它只能為有嚴格QoS要求的被區分的服務提供有限的能力 [ 1 ]. 2 ）由于MANETs的靈活性，多級跳以及自組性，因而，傳 統 的流動項目和訪問控制機制就非常難以實現。</p><p>　　目前，我國大部分基于MANETs傳統的多層協議結構的QoS研究都側重于支持QoS [ 2 ]的MAC協議， QoS路由協議[ 3 ]和與QoS支持[ 4 ]適應的應用層協議，等等。但，這無法避免堆棧中不同協議層之間會出現

7、冗余。這會增加QoS實施的復雜性，并且給網絡性能的整體改進造成困難。因此，MANETs必須具備較高的處理能力。</p><p>　　近年來，基于MANETs部份協議層的跨層設計得到了很大發展。 [ 1 ]提出了網絡層與MAC層交換信息而產生的異構流的機制，并有QoS保證。 [ 5,6,7,8 ]主要是研究在保證QoS的前提下，在MANETs.中如何通過少層之間的信息交換與協作而實現視頻通信。這些在某種程度上可以改

8、進MANETs.通信的服務質量。然而MANETs.比有線系統和靜態網絡復雜得多，而且QoS保證的改善取決于協議棧中所有層的充分合作。因此，在MANETs.中很難設計一種能為通信與網絡性能的改進提供有效的QoS保證的方案。</p><p>　　為了充分的利用有限的資源和MANETs整體性能的最優化，本文將介紹一種新型的跨層QoS模型，CQMM，即不同層次可以充分交換信息，還可以執行統一的QoS管理和控制。

9、0;</p><p>　　本文剩下內容將作如下安排： 第2部分仔細介紹CQMM。第3部分，我們將通過與DQMM的對比來分析CQMM。第4部分將對全文給與總結。</p><p><b>　　.</b></p><p>　　移動AD HOC網絡跨層服務質量模型--CQMM2.1 CQMM結構目前，在移動AD HOC網絡中大部分的QoS研究都是基

10、于傳統的分層協議架構，支持QoS的信號和算法是在不同層次分別地設計和實施的。例如，在數據鏈路層[ 9 ]的支持QoS的MAC協議，在網絡層[ 10.11 ] 支持QoS路由協議，等等。它可以被歸納為一個移動AD HOC網絡多層次的QoS模型， DQMM（見圖1 ） 。 </p><p>　　在DQMM中 ，協議棧里的不同層設計是獨立設計與工作的。在邏輯上相鄰的不同層之間只有靜態的接觸;每個協議層有一定的QoS的，

11、如在邏輯鏈路層誤差控制，網絡中的擁塞控制等。一方面， DQMM可以極大簡化MANETs設計，并增加了高可靠性和擴展性的協議。另一方面， DQMM也有一些不足之處： 1） 由于不同的協議層間獨立設計，因此堆棧中不同協議層會存在功能上的冗余。2 ） 由于邏輯上不相鄰的層與層之間信息交換十分困難，從而引起了在統一的管理，QoS控制，網絡性能的改善方面的許多問題。</p><p><b>　　Fig 2<

12、;/b></p><p>　　因此，當試圖最優化MANETs.各層的性能時，有必要把更多地注意力集中物理層、數據鏈路層、網絡層和較高的層之間的協作。為此，我們結合分散在不同層次參數，設計了一種新型的跨層QoS模型， CQMM，以改善QoS保證和網絡的整體性能。CQMM的結構如圖2 圖2</p><p>　　從圖2 ，我們可以看出CQMM保持了堆棧中每個協議層的核心功能和相關獨立性

13、，為保持模塊機構的優勢，它還允許邏輯上相鄰的兩個層之間的直接信息交換。在這些基礎上，CQMM還增加了一個核心組件，網絡狀態儲存庫(簡稱 NSR)。NSR是核心，通過它，不同層之間可以充分地交換和共享信息。一方面，通過NSR,每個協議層能夠知道其它協議層的狀態信息，并決定自己的功能與執行機制。另一方面，每個協議層在NSR上注明自己的狀態信息以供協議棧的其它層查詢。在CQMM，邏輯上相鄰的協議層之間通過NSR可以直接或間接的交換信息，而那些

14、邏輯上不相鄰的協議層之間通過NSR用跨層的方法也可以交換信息。因此，在CQMM中，信息交換是非常靈活的。</p><p>　　CQMM的各種QoS控制都不是獨立的進行的，如網絡資源管理和調度、網絡壽命、差錯控制、擁塞控制和性能優化等。與此相反， 通過堆棧中各協議層之間的協作，CQMM負責統一管理和所有QoS控制。MANETs中的每個QoS控制與協議棧的所有層都相關，同時也受到它們的限制。QoS操作和管理的所有結果

15、都要反饋給所有的層，并寫進NSR成為MANETs.所有QoS控制的參數。</p><p><b>　　2.2的協議設計</b></p><p>　　CQMM協議設計著眼于各協議層之間信息的自由、充分交換和協作不會出現功能上的冗余，同時又能保持各協議層之間的相關獨立性和模結構的優勢。</p><p>　　物理層：物理層負責數據的調制，傳輸與接收，

16、同時也決定MANETs各節點大小、成本和能源消耗。在CQMM ，物理層的設計是根據執行成本，能量的大小和限制，以及高層的QoS要求，選擇低成本，低耗能，低復雜度和大信道能力的傳輸介質、頻率范圍、調制算法。</p><p>　　數據鏈路層：該層處于協議棧是低層，可分為兩個子層：邏輯連接子層和MAC子層。相對于高層，數據鏈路層可以較早感知MANETs中的網絡狀態，如頻道質量更改，網絡擁塞等。因此，一方面是數據鏈路層能

17、夠執行基本QoS的控制，如誤差控制和交流頻道管理。另一方面，可以與高層次相互結合，建立、選擇和維護更快速度的路由，較早預防網絡阻塞，并為傳輸層選擇適當?shù)膫鬏敊C制和控制戰略。</p><p>　　網絡層：CQMM網絡層協議的設計和實施是為了建立，選擇，維持適當?shù)穆酚?，同時考慮路由中每個節點的耗能，高速緩存和可靠性。QoS需要較高層的服務，如帶寬、延遲，較低層次的實施策略，如邏輯連接子層的錯誤控制機制，物理層子層的頻

18、道管理的方法。</p><p>　　傳輸層：CQMM傳輸層協議的設計需要同時考慮低層的功能與執行機制，如數據鏈路層的錯誤控制方法，網絡層路由的建立、選擇、維持的方法，決定相應傳輸策略的來至應用層的QoS要求。。</p><p>　　應用層：有兩種不同的應用層設計策略： 1 ）區分服務：按照各低層次所提供的職能劃分為不同的優先等級。2 ）應用智能設計：分析不同應用程序的具體要求，如帶寬，時延

19、和twitter時延等，然后根據協議棧各層的要求分配和執行相應的功能。</p><p>　　2.3 CQMM 的QoS合作與管理</p><p>　　QoS合作和管理的核心是作為協議棧里信息狀態交流和共享中心的NSR，通過不同協議層之間網絡狀態的充分交流與共享，網絡資源的管理和調度，以及網絡性能的整體優化都能夠有效地實現。其中包括網絡資源的管理與調度，跨層QoS 協作和網絡性能的整體優化

20、。</p><p>　　網絡資源的管理和調度：網絡資源包括各種資源，例如高速緩存，每一個節點能力和隊列，節點之間的通信頻道，等等。在CQMM中，為了增加各種通信QoS，網絡資源的管理和調度并不是統一的，有限的資源也不是完全利用的。</p><p>　　QoS的合作和控制：在CQMM中 ，各種QoS的控制和合作，例如，比率調整，延遲保證和擁塞控制等，都并不是由各層單獨實現的，而是協議棧各層相

21、互協作完成的。舉例來說，通過個協議層的協作，如物理子層的ACK，網絡層的路由信息、包的丟失率和延時，傳輸層的比率調整信息等等，MANETs的擁塞可以較早地被預防和控制。</p><p>　　性能優化：在CQMM中 ，網絡性能的優化主要目的是建立一個由協議結構所有層制約的網絡優化模型，并根據這個模型找到一種能夠改進MANETs整體新能的方法。</p><p>　　3 CQMM分析 目前MA

22、NETs 的QoS模型可被歸為兩類，一類是基于傳統層劃分結構的DQMM，另一類是本文介紹的跨層QoS模型CQMM。[ 1,5-8 ] 所使用的QoS模型本質上只是在DQMM基礎上一定程度的拓寬。在這里，我們只是比較CQMM與DQMM。 </p><p>　　3.1信息交流CQMM 與DQMM協議體系和原則的不同在信息交流的方式，頻率，時間，需求也存在很大的區別。（見表1 ） </p><p

23、>　　從表1中可以看出，與DQMM比較 ，CQMM有許多優點： 1 ）更靈活的信息交流 。相鄰層可以通過層或NSR之間的接觸交換信息，交叉層也可以通過NSR交換信息。2 ）更簡單的信息格式變換。不同層之間通過NSR可以交換信息，因此這些層只需要處理層與NSR之間的格式轉換問題。3 ）更低的要求。協議層可以從臨時存在NSR中的不同協議層適時信息讀取它們，因此信息改變的層不必要及時保持同步4 ）更精確地控制。在CQMM中，NSR存儲了

24、不同層某些時候的信息，這樣更利于準確地掌握網絡狀態和管理網絡。3.2 Protocol Design </p><p><b>　　.</b></p><p>　　3.2協議設計在DQMM 中，由于功能和協議設計上的相互獨立性，各層之間在執行可靠的信息傳輸時不可避免的會出現一些功能上的榮譽。不過，CQMM可以在不同的層之間執行統一的功能分配，并且能通過各層協作支持的

25、QoS實現通信。</p><p>　　表1.CQMM與DQMM之間信息交換的對比</p><p>　　3.3網絡資源和性能優化的管理和調度</p><p>　　不同協議層之間缺乏充分的信息交流限制了DQMM網絡性能的整體改進。在DQMM中，通過NSR,協議棧里不同層之間能夠自由、充分地交換信息，有利于網絡資源統一的規劃和調度，在整個網絡的基礎上建立性能優化模型，并做

26、好網絡性能整體改善。</p><p>　　3.4執行議定成本和復雜性由于棧里每個協議層的相互獨立性，不同協議層之間只有較少的接觸與信息的交流，因此DQMM需要較低的層本于復雜度。在CQMM中，棧中不同協議層之間自由、充分地交換信息需要：每個節點上上必須增加一個網絡狀態存儲器，并提供替代策略以及時更新狀態信息；在每個協議層和NSR交換信息的地方增加接口；建立更復雜的數學模型和控制機制以優化網絡性能。這些都會導致C

27、QMM中執行成本和復雜度的增加。</p><p>　　相比DQMM ，CQMM能夠為協議棧里的不同層提供自由和充分的信息交流，消除不同層之間的功能冗余，更好的實現網絡資源的管理域調度，使MANETs.的整體性能最優化。但這些優勢都是高成本和高復雜度為代價的</p><p>　　4 .結論和未來工作  本文為MANETs.提供了一種新的跨層QoS模型，CQMM。相比DQMM ，

28、 CQMM有以下優點： 1 ）通過NSR，協議棧中不同層可以自由、充分地交換信息。 2 ） CQMM.可以消除協議棧中不同層之間的功能冗余層協議棧，并更好地執行網絡資源統一管理和調度和網絡性能的整體改善。基于CQMM的框架，今后的工作將側重于跨層協議的設計，跨層控制與QoS合作，用跨層的方法對MANETs性能的整體改善。</p><p><b>　　5. 參考文獻</b></p>

29、<p>　　【1】L.Wei，X.Chen 等等，“內涵：支持區分在Ad Hoc網絡中的多次反射移動”，移動計算，IEEE事物處理，2004.3（4）：380-393.</p><p>　　【2】G..Ahn，A.T. 坎貝爾等等，“本地多級無線網絡確認支持服務”，美國電氣及電子工程師學會全球電訊會議2003，洛杉磯，CA,USA,Dec.2003。</p><p>　　【3

30、】G．Mohsen,無線通訊系統和網絡，2004</p><p>　　【4】G..Andrea, 無線通訊，劍橋大學出版社，2004</p><p>　　【5】W.Kumwilaisak , Y.T.Hou, 等等，一個跨層的品質服務映射架構的視頻在無線網絡中的傳輸。</p><p>　　【6】Eric Setton,T.Yoo,等等, 跨層設計的Ad Hoc網絡實

31、時視頻流，無線通訊，美國電氣及電子工程師學會，2005,12(4):59-65.</p><p>　　A Novel Cross-layer Quality-of-service Model</p><p>　　For Mobile AD hoc Network</p><p>　　Leichun Wang, Shihong Chen, Kun Xiao, Ruim

32、in Hu</p><p>　　National Engineering Resarch Center of Multimedia Software, WuhanUniversity</p><p>　　Wuhan 430072, Hubei ,china</p><p>　　Email:wlc2345702@163.com</p><p>

33、<b>　　Abstract</b></p><p>　　The divided-layer protocol architecture for Mobile ad hoc Networks(simply MANETs)can only provide partial stack. This leads to treat difficulties in QoS guarantee of mu

34、ltimedia information transmission in MANETs, this paper proposes Across-layers QoS Model for MANETs, CQMM. In CQMM ,a core component was added network status repository(NSR), which was the center of information exchange

35、and share among different protocol layers in the stack. At the same time,CQMM carried out all kinds of unified </p><p>　　Keyword Cross-layers QoS Model, Mobile Ad hoc Networks(MANETs);Network Status Reposit

36、ory(NSR) QoS Controls.</p><p>　　1 introduction</p><p>　　With the rapid development of multimedia technologies and the great increase of he bandwidth for personal communication,video and Video se

37、rvices begin to be deployed in MANETs. Different from static networks and Internet,multimedia communications in MANETs such as Voice and Video services require strict QoS guarantee, especially the delay guarantee. In add

38、ition, communication among different users can be integrated services with different QoS requirements. These lead to great challenges in QoS g</p><p>　　At present, most researches on QoS based on traditional

39、 divided-layer protocol architecture for MANETs focus on MAC protocol supporting QoS[2],QoS routing protocol [3] and adaptive application layer protocol with QoS support[4], and so on. It is avoidless that there will be

40、some redundancies on functions among the different protocol layers in the stack. This will increase the complexity of QoS implementation and cause some difficulties in overall improvement on the network performances. The

41、refor</p><p>　　In recent years, the cross-layers design based on the partial protocol layers in MANETs was put forward.[1] proposed the mechanism with QoS guarantee for heterogeneous flow MAC layer.[5,6,7,8]

42、 did some researches on implementing video communication with QoS guarantee by exchange and cooperation of information among a few layers in MANETs. These can improve QoS in MANETs’ communication to some extent. However,

43、 MANETs is much more complex than wired system and static network, and improvements on Q</p><p>　　To make good use of limited resources and optimize overall performances in MANETs, this paper proposes a nove

44、l cross-layer QoS model, CQMM, where different layers can exchange information fully and unified QoS managements and controls can be performed.</p><p>　　The rest of the paper is organized as follows. CQMM is

45、 described in section 2 in detail. In section 3,we analyze CQMM by the comparison with DQMM..The section 4 concludes the paper.</p><p>　　2. A CROSS-LAYER QOS MODEL FOR MANETS-CQMM</p><p>　　2.1 A

46、rchitecture of CQMM</p><p>　　In MANETs, present researches on QoS are mostly based on traditional divided-layer protocol architecture, where signals and algorithms supporting QsS are designed and implemented

47、 in different layers respectively, such as MAC protocol supporting QoS in data link layer [9], routing protocol with QoS support in network layer[10.11],and so forth. It can be summarized as A Divided-layer QoS Model for

48、 MANETs, DQMM (see fig.1).</p><p>　　In DQMM, different layers in the protocol stack are designed and work independently; there are only static interfaces between different layers that are neighboring in logi

49、c; and each protocol layer has some QoS controls such as error control in logic link layer, congestion control in network, etc. On the one hand, DQMM can simplify the design of MANETs greatly and gain the protocols with

50、high reliability and extensibility. On the other one, DQMM also has some shortcomings: ) due to the independe</p><p>　　Fig..1 </p><p>　　Therefore, it is necessary that more attention a

51、re focused on the cooperation among physical layer data link layer, network layer and higher when attempting to optimize performances of each of layer in MANETs. For this reason, we combine parameters dispersed in differ

52、ent layers and design a novel cross-layer QoS model, CQMM, to improve the QoS guarantee and the overall network performances. The architecture of CQMM is provided in fig 2</p><p><b>　　Fig 2</b>&l

53、t;/p><p>　　From fig.2 ,it can be seen that CQMM keeps the core functions and relative independence of each protocol layer in the stack and allows direct information exchange between two neighboring layers in l

54、ogics to maintain advantages of the modular architecture .On the basic of these , a core component is added in CQMM, Network Status Repository (simply NSR).NSR is the center, by which different layers can exchange and sh

55、are information fully. On the one hand, each perotocol layer can read the status </p><p>　　All kinds of QoS controls in CQMM such as management and scheduling of network resources, network lifetime, error co

56、ntrol, and congestion control and performance optimization and so on, are not carried out independently. On the contrary, CQMM is in charge of the unified management and all QoS controls by the cooperation among differen

57、t protocol layers in the stack. Each QoS control in MANETs is related to all layers in the protocol stack, and also constrained by all layers in the stack. The resu</p><p>　　2.2 protocol design in CQMM </

58、p><p>　　In CQMM, the protocol designs aims at the full and free information exchange and cooperation among different protocol layers to avoid possible redundancy functions when maintaining the relative independ

59、ence among different layers and the advantages of the modular architecture.</p><p>　　Physical layer: Physical layer is responsible for modulation , transmission and receiving of data ,and also the key to th

60、e size, the cost and the energy consumption of each node in MANETs. In CQMM,the design of physical layer is to choose the transmission media, the frequency range and the modulation algorithm wit the low cost, power and c

61、omplexity, big channel capability and so on, according to the cost of implementation, energy constraint, and capability and QoS requirements from high layer.</p><p>　　Data link layer: The layer is low layer

62、in the protocol stack and can be divided into two sub-layers: logic link sub-layer and MAC sub-layer. Compared with high layers, data link layer can sense network status in MANETs earlier such as the change of channel qu

63、ality, the network congestion and so on. Therefore, on the one hand data link layer can perform the basic QoS controls such as error control and management of communication channel. On the other one, the layer can be com

64、bined with high laye</p><p>　　Network layer: The design and implementation of network layer protocol in CQMM is to establish, choose and maintain appropriate routings by taking into consideration the power,

65、the cache, the reliability of each node in a routing. QoS requirements of services from high layer such as the bandwidth and the delay, and implementation strategies of error control in logic link sub-layer and the way o

66、f the channel management in MAC sub-layer.</p><p>　　Transport layer: In CQMM , the protocol design of transport layer needs to be aware of both functions and implementation mechanism of lower layers such as

67、 the way of error control in data link layer , the means to establish, choose and maintain routing in the network layer, and QoS requirements from the application layer, to determine corresponding transmission strategies

68、. In addition, the transport layer also needs to analyze all kinds of events from low layers such as the interrupt and change</p><p>　　Application layer: There are two different strategies in the design of t

69、he application layer:1)differentiated services. According to the functions provided by the low layers applications are classed as the different ones with different priority levels. 2) Application-aware design. Analyze sp

70、ecific requirements of different applications such as the bandwidth, the delay and the delay twitter and so on, and then assign and implement the functions for each layer in the protocol stack according to th</p>

71、<p>　　2.3 QoS Cooperation and Management in CQMM</p><p>　　In CQM, the core of QoS cooperation and management is that NSR acts as the exchange and share center of status information in protocol stack, an

72、d by the full exchange and share of network status among different protocol layers the management and scheduling of the network resources and the overall optimization of the network performances can be implemented effect

73、ively. The management and scheduling of the network resources, the cross-layer QoS cooperation and the overall optimization of the netw</p><p>　　Management and scheduling of network resources: Network resou

74、rces include all kinds of resources such as the cache, the energy and the queue in each node, and the communication channel among nodes and so froth. In CQMM, the management and scheduling of the network resources are no

75、t to the unified management and scheduling of the network resources and full utilization of limited resources in order to increase the QoS of all kinds of communication.</p><p>　　QoS cooperation and control:

76、 In CQMM, all kinds of QoS controls and cooperation such as the rate adaptation, the delay guarantee and the congestion control and so on, are not implemented by each layer alone, but completed through the operation of a

77、ll layers in the protocol stack. For example, the congestion in MANETs can be earlier prevented and controlled by the cooperation among different layers such as ACK from MAC sub-layer, the routing information and the los

78、s rate and delay of package from</p><p>　　Performances Optimization: In CQMM, the optimization of the network performances aims to establish a network optimization model constrained by all layers in the prot

79、ocol architecture and finds the “best” ways according to the model in order to improve the overall performances in MANETs.</p><p>　　3ANALYSIS OF CQMM</p><p>　　Present QoS models for MANETs can m

80、ainly be classed as a QoS model based on traditional divided-layer architecture DQMM and a cross-layer QoS model proposed by this paper CQMM. QoS model used by [1,5-8] is to some extent extended on the basis of DQMM in n

81、ature. Here,. We only compare CQMM with DQMM</p><p>　　3.1 Information Exchange </p><p>　　Different protocol architecture and principle between CQMM lead to great differences in the means, the fr

82、equency, the time and the requirement of the information exchange,(see table 1)</p><p>　　From Table 1, it can be seen that compared wit DQMM CQMM has some advantages:1) more flexible information exchange,. N

83、eighboring layers can information by the interfaces between layers or NSR, and crossing layers may exchange information through NSR; 2) simpler transform in information format. Different layers can exchange information b

84、y NSR, so these layers only need to deal with the format transform between the layers and NSR;3)lower requirements. The protocol layers can read them in proper ti</p><p>　　3.2 Protocol Design </p><

85、;p>　　In DQMM, it is inevitable that there are some redundancy functions among different protocol layers for implementing reliable information transmission because of the independence in function and protocol design. H

86、owever, CQMM can perform unified function assignation among different layers and implement communication with QoS support by the cooperation among the different layers.</p><p>　　Table 1. Comparisons of infor

87、mation exchange between CQMM and DQMM</p><p>　　3.3 management and scheduling of network resources and performances optimization </p><p>　　The lack in full information exchange among different p

88、rotocol layers in the stack limits the overall improvements on the network performances in DQMM. In the protocol stack can exchange information freely and fully through NSR. Which benefits unified planning and scheduling

89、 of the network resources establishing performance optimization model based on the whole network, and performing the overall improvements on the network performances.</p><p>　　3.4 cost and complexity of impl

90、ementing protocols </p><p>　　Due to the independence of each protocol layer in the stack, there are less interfaces and information exchange among different layers protocol layers of the stack requires: add

91、NSR in each node to store network status and provide replacing strategies to u date status information in time; increase interfaces where each protocol layer and NSR exchange information; establish more complex mathemati

92、cs model and control mechanism to optimize network performances. There lead to the increase of the imp</p><p>　　Compared with DQMM, CQMM can provide free and full information exchange for different layers in

93、 the protocol stack, eliminate redundancy functions among the different layers, better realize the management and scheduling of the network resources, and optimize overall performances in MANETs. There advantages are at

94、the cost of higher cost and complexity.</p><p>　　4. conclusions and future work</p><p>　　This paper provides a new cross-layer QoS model for MANETs,, CQMM. Compared with DQMM, CQMM has the foll

95、owing advantages:1) different layers in the protocol stack can exchange information freely and fully through NSR:2) CQMM layers in the protocol stack, and better implement different unified management and scheduling of t