gprs外文翻譯--理論研究通用分組無線業務

1、<p>　　山 東 科 技 大 學</p><p><b>　　外 文 翻 譯</b></p><p>　　學 院 名 稱 電氣信息系 </p><p>　　專 業 班 級 電氣工程及其自動化10-4 班 </p><p>　　學 生 姓 名 梅玉金

2、 </p><p>　　學 號 201003201414 </p><p>　　指 導 教 師 姚 福 強 翟 緒 梅 </p><p>　　Theoretical Study of the General Packet Radio Service</p><p>

3、;　　Abstract: As communications technology continues to mature and users’ quality have become increasingly demanding, new data applications are emerging and are reaching the general public. Through the use of GPRS (Genera

4、l Packet Radio Service) technology, the existing GSM networks can be easily achieved with simple high-speed data packet access, enabling mobile operators to respond rapidly to market demands and gain competitive advantag

5、e. This paper aims to provide a comprehensive yet simple overvi</p><p>　　Keywords: GPRS networks; Voice/data integration; Multiple-channels; Packet radio; Telecommunications</p><p>　　1 Introduct

6、ion</p><p>　　In the late 1800s, Marconi did the pioneer work establishing the first successful radio link between a land-based station and a tugboat. Since then, wireless communication systems have been deve

7、loping and evolving with a furious pace. The number of mobile subscribers has been growing tremendously in the past decades. In the early stages, wireless communication systems were dominated by military usage and suppor

8、ted according to military needs and requirements. During the last half a century, with</p><p>　　The systems were isolated from each other and only a few of the communicated with the PSTN (Public Switched Tel

9、ephone Networks). Today, the cellular systems consist of a cluster of ba -se station with low power radio transmitters. Each base station serves a small cell within a large geographic area. The total number of users serv

10、ed is increased because of channel reuse and al -so larger frequency bandwidth. </p><p>　　Global system for mobile communications is the European standard for cellular communications developed by the ETSI (E

11、uropean Telecommunications Standards Institute).Throughout Europe and the rest of the world, GSM has been widely adopted. It has already been implemented in over 100 countries. The most important service in GSM is voice

12、telephony. Voice is digitally encoded and carried by the GSM network as a digital stream in a circuit-switched mode. </p><p>　　Data services have been gaining popularity in cellular networks since they were

13、first introduced through the circuit-switched connection. As cellular carriers, however, start deploying the packet data service such as GPRS (General Packet Radio Service), carriers can provide data services in a more b

14、andwidth-efficient way over the cellular network, thereby increasing the radio resource utilization.</p><p>　　2 GPRS-related technologies</p><p>　　GSM offers data services already but they have

15、been constrained by the use of circuit-switched data channels over the air interface allowing a maximum bit rate of 14.4 kb/s. For this reason, the GSM standard has continued its natural evolution to accommodate the requ

16、irement for higher bitrates. The HSCSD (High-speed Circuit-switched Data) are one solution that address this requirement by allocating more time slots per subscriber and thus better rates. It remains however insufficient

17、 for bursty d</p><p>　　GPRS stands out as one major development in the GSM standard that benefits from packet switched techniques to provide mobile subscribers with the much needed high bit rates for bursty

18、data transmissions. It is possible theoretically for GPRS subscribers to use several time slots (packet data channels) simultaneously reaching a bit rate of about 170 kb/s. Volume-based charging is possible because chann

19、els are allocated to users only when packets are to be sent or received. Bursty data application</p><p>　　2.1 Basic Principle</p><p>　　In a cellular network, an entire geographic area is divided

20、 into cells, with each cell being served by a base station. Because of the low transmission power at the base station, the same channels can be reused again in another cell without causing too much interference. The conf

21、iguration and planning of the cell is chosen to minimize the interference from another cell and thus maximum capacity can be achieved. The cell is usually depicted as a hexagon, but in reality the actual shape varies acc

22、o</p><p>　　Mobility is one of the key features in wireless communication systems. There is a need to track the users moving into different cells and changing radio channels. A mobile switched to another chan

23、nel in a different cell is called handoff. A signaling and call processing procedure is needed to support user mobility and handoff such that a mobile phone can be completed successfully. Paging is another key feature in

24、 cellular systems. It uses a common shared channel to locate the users within the se</p><p>　　2.2 Multiple Access Technique</p><p>　　Multiple access is a technique to allow users to share a comm

25、unication medium so that the overall capacity can be increased. There are three commonly used multiple access schemes: FDMA (Frequency Division Multiple Access), TDMA (Time Division Multiple Access), CDMA (Code Division

26、Multiple Access). In FDMA, each call is assigned its own band of frequency for the duration of the call. The entire frequency band is divided into many small individual channels for users to access. In TDMA, users share&

27、lt;/p><p>　　Each call is assigned a different time slot for its transmission. In CDMA, users share the same band of frequencies and time slots. Each call is assigned a unique code, which can spread the spectrum

28、 to the entire frequency band. The spectrum spread calls are sent on top of each other simultaneously, and are separated at the receiver by an inverse operation of the unique codes. A combination of the three multiple ac

29、cess schemes can also be applied.</p><p>　　2.3 Power Control</p><p>　　Power control is one of the most important design features in wireless communication including FDMA, TDMA, and CDMA systems.

30、 It ensures each user transmits and receives at a proper energy level to convey information successfully while reducing the interference to other users. Power control is needed in FDMA and TDMA systems because of the co-

31、channel interference management. This type of interference is caused by the frequency reuse in the limited available spectrum. Via a proper power level adju</p><p>　　Power control can be operated in a centra

32、lized form or a distributed form. A centralized controller obtains the information of all the established connections and channel gains, and controls the transmission power level. The centralized approach can optimize th

33、e power usage of the entire or part of the network and thus is very efficient. It requires extensive control signaling in the network, however, and is difficult to apply in practice.</p><p>　　3 GPRS architec

34、ture</p><p>　　GPRS is considered as a service or feature of GSM. It was designed by ETSI to be implemented over the existing infrastructure of GSM without interfering with the already existing services. The

35、aim is quick GPRS deployment with minor impact on existing GSM PLMN components. Fig. 1 illustrates the logical architecture of a GSM network supporting GPRS.</p><p>　　Figure 1. Architecture of GPRS network&l

36、t;/p><p>　　3.1 Mobile Station</p><p>　　GPRS and GSM systems provide inter-working and sharing of resources dynamically between users. For this reason, three types of terminals have been defined: a

37、class-A MS can carry a circuit-switched and a packet switched connection simultaneously enabling the subscriber to initiate or receive a voice call without interrupting a data transmission or reception activity. This typ

38、e of terminal probably will not be available when GPRS is initially deployed due to its complexity and high cost. An MS of</p><p>　　The GPRS MS has two components: a MT (Mobile Terminal) which is typically a

39、 handset used to access the radio interface as a radio modem, and a TE (Terminal Equipment) which is typically a laptop or a PDA (Personal Digital Assistant). GPRS MS will also come as one unit combining the functionalit

40、ies of an MT and a TE.</p><p>　　3.2 Base Station Subsystem</p><p>　　GPRS has minor impact on the existing GSM BSS making it easy to reuse existing component and links without major modifications

41、. This is possible because GPRS uses the same frequency bands and hopping techniques, the same TDMA frame structure, the same radio modulation and burst structure as GSM.</p><p>　　A new functional component

42、called PCU (packet control unit) was added to the BSS in the GPRS standard to support the handling of data packets. The PCU is placed logically between the BSS and the GPRS NSS. Unlike the voice circuit connections howev

43、er, connections in GPRS have to be established and released between the BSS and the MS only when data need to be transported over the air interface. Therefore, ETSI has defined new procedures to adapt such connections.&l

44、t;/p><p>　　3.3 Network Switching Subsystem</p><p>　　The GPRS NSS can be viewed as an overlay network ensuring the link between mobile users and data networks. GPRS introduces a new functional eleme

45、nt to the GSM infrastructure: GSN (GPRS Support Node) which can be either a SGSN (Serving-GSN) or a GGSN (Gateway-GSN). This addition is necessary for the GSM network in order to support packet data services. The network

46、 is generally divided into several service areas controlled by separate SGSN. Only one SGSN serves an MS at a given time provided it is</p><p>　　Several interfaces have been introduced in GPRS to define enti

47、ty-to-entity interactions. For instance, the interface is required between the BSC and the SGSN. Two GSN communicate through a interface, and the SGSN sends queries and receives subscriber information to/from the HLR th

48、rough the interface. The interface between the SGSN and the MSC/VLR was left optional while the interface which connects a GGSN to a PDN was not specified in the standard to allow implementation preferences.</p>&

49、lt;p>　　As mentioned, GPRS standard activities focused mainly on PTP connections to IP PDN at the GI interface. An example of such IP PDN can be a corporate Intranet where access is restricted to authenticated corporat

50、e employees allowing them to access for instance the corporate web and mail servers. Another example is connectivity to an ISP (Internet service provider) offering Internet access and related services.</p><p&g

51、t;　　4 Conclusion</p><p>　　GPRS acting as GSM network bear service represents a major development toward the next generation wireless mobile network such as UMTS (Universal Mobile Telecommunication System). I

52、n the GPRS architecture, a Base Station Controller and the multiple Base Stations constitute the Base Station System. At the output of the BSC, the voice or data traffic is separated. Specifically, voice is transported t

53、o the MSC while data is sent to the SGSN. The GGSN is used as a gateway between GPRS and the extern</p><p>　　理論研究通用分組無線業務</p><p>　　摘要：隨著通信技術的不斷成熟和用戶的質量要求越來越高，新的數據應用不斷涌現，并被廣泛運用。通過GPRS技術的使用，現有的GSM

54、網絡可以簡單方便地實現高速數據分組接入，使移動運營商迅速響應市場需求和獲得競爭優勢。本文旨在從用戶和架構的角度提供一個全面而又簡單的GPRS系統概述。</p><p><b>　　1 介紹</b></p><p>　　在19世紀后期，馬可尼做了一項具有開創性意義的工作，就是成功連接了一個路基站和一艘船之間的無線鏈路。從那時開始，無線通訊系統就在以非常驚人的速度朝前發展

55、著。移動用戶在過去的幾十年里以巨大的速度在增長著。在早期階段，無線通訊系統等技術主要用于軍事方面，根據需要和要求對軍事進行各種支持。在過去的半個世紀世紀，隨著越來越多的移動用戶使用移動服務，商用無線通信系統已經處于領頭地位。</p><p>　　早期的無線信息系統包括了一個一個基地站與一個高功率的發射器和一個大的地理區域。每一個基地站只能支持一小部分用戶的服務，并且費用十分昂貴。這些系統是互相隔離開的，只有一小部

56、分與公眾溝通交換電話網絡保持連接。如今，移動系統包括了一個低功率的基站簇無線電發射機。每個基站在一個大的地理區域內提供一個小的細胞服務。該服務通道的重復使用和頻率帶寬變大會使得用戶總數隨之增加。</p><p>　　全球移動通信系統是由歐洲電信標準協會開發的歐洲標準的移動通信。在整個歐洲和世界上的其他地區，GSM系統已經被廣泛使用。它已經在100多個國家被實施使用。在GSM系統中，最重要的服務莫過于語音電話。語音

57、信息在GSM網絡中作為數字流以一種電路交換模式進行數字編碼。</p><p>　　由于數據服務首先通過電路交換鏈接介紹了移動網絡，它們已經越來越受到了大眾的認可。隨著運營商開始部署像GPRS這樣的分組數據服務，他們可以以更高效帶寬的方式提供移動網絡服務，從而提高無線資源的利用率。</p><p>　　2 GPRS的相關技術</p><p>　　雖然GSM已經提供了數

58、據服務，不過由于使用電路交換數據通道接口，它們?nèi)允艿娇罩性试S最大比特率14.4千比特/秒的限制。出于這樣的原因，GSM繼續其自然發展演變以滿足更高的比特率要求。為了使每個用戶更好的分配時隙從而提高利用率，高速電路交換數據成為了一個解決途徑。但是它仍然不足以應對像Web瀏覽這樣的突發數據應用。除此之外，HSCSD依靠電路交換技術吸引了一部分的用戶，他們希望收取的費用以數據流量為準而非實際持續連接的時間。而另一方面，服務提供商則需要更有效的

59、手段在越來越多的用戶之間分享越來越少的無線資源。在一個電路交換模式下，一個通道只被分配用于記錄一個用戶的連接時間。這種對無線電資源的一對一訪問在數據包交換技術中并非是必需的。</p><p>　　GPRS以一個非常重大的發展而在GSM標準中凸顯出其地位來，這就體現在分組交換技術上，為更多的移動用戶提供突發數據需要傳輸?shù)母弑忍芈省＠碚撋蟻碚f，GPRS用戶可以同時使用幾個時段，并且可以達到約170千比特每秒的比特率。

60、由于發送或接受數據包時渠道被分配給相應用戶，所以基于卷的收費是很有可能的。因為供應商可以使用其他用戶活動傳輸?shù)牟罹?，所以突發數據的應用使人們有可能更有效地平衡用戶與用戶之間的網絡資源。</p><p><b>　　2.1 基本原則</b></p><p>　　在一個移動網絡中，整個地理區域被分為很多部分，每個部分由一個基站提供服務。由于基站的發射功率較低，所以在重復使

61、用同樣的渠道時，另一個單元并不會受到太多的干擾。對小單元的配置和選擇可以盡量減少對另一個單元的干擾，從而可以達到最大的容量。一個單元通常被描繪成一個六邊形，但在現實中的實際形狀則根據不同的地理環境和無線電傳播而稍有不同。我們通?；谟脩舻拿芏葋磉M行信道的分配。如果一個單元要服務很多的用戶，通常就會有更多的頻道分配。這些渠道就重復使用相鄰的單元或者單元群。在具有相同廣播頻道但被空間分離的單元中，較低的發射功率和天線的方向使同頻道干擾保持在

62、一個可接受的水平內。</p><p>　　可移動性是無線通信系統最關鍵的特征之一。有時我們需要追蹤用戶的一些應用，如在不同單元間轉換以及改變無線電通道。一個移動在不同單元內轉換通道被稱作切換。運用信息和呼叫處理的程序來支持用戶移動性和切換使得移動電話能夠被順利完成。分頁是移動系統中另外一個非常重要的特征。通常我們在服務范圍內使用一個共享信道查找用戶并且廣播一些信號消息。</p><p>　

63、　2.2 多址接入技術</p><p>　　多址接入是一種允許用戶共享通信媒介的技術，這樣一來系統整體的能力就可以被增強。一般有三種常用的多址接入方案：FDMA（頻多分址），TDMA（時多分址），CDMA（碼多分址）。在FDMA中，每個呼叫都為它自己的通話時間分配了其相應的頻率。整個頻帶被分成了很多小的個人渠道提供給用戶訪問。在TDMA中，用戶共享同一頻段的頻率。每個呼叫被分配一個不同的傳輸時隙。在CDMA中，用

64、戶共享同一頻段的頻率和時間。每個呼叫被分配一個唯一的代碼，它可以傳播到整個頻譜的頻段。這些擴頻電話被同時發送出去，并且有一個獨特的逆運算碼接收機分離開。由三個多址接入方案合成的方法也可以被運用。</p><p><b>　　2.3 功率控制</b></p><p>　　功率控制是無限通信中最重要的設計功能之一，包括了FDMA，TDMA，和CDMA。它確保了用戶以適當?shù)?/p>

65、能量水平來發送和接受數據從而成功傳達信息，同時減少對其他用戶的干擾。</p><p>　　由于同頻道干擾管理的存在，功率控制在FDMA和TDMA系統中是不可或缺的。造成這種類型的干擾的原因是對有限的可用頻譜的頻率復用。通過適當?shù)墓β孰娖降恼{(diào)整，同頻干擾可以相應減少。這就產生了一個更好的頻率復用因子，從而增加了系統的容量。功率控制是CDMA系統中最重要的需求。如果沒有功率控制，所有具有相同功率的手機都會不考慮路徑損

66、耗和衰減效應而被傳送到基站。越靠近基站的手機就會對基站產生更大的信息干擾。這種效果就是所謂的近/遠影響。因此，一個設計良好的功率控制算法對于一個CDMA系統的正常運作起了至關重要的作用。在功率控制的情況下，系統的容量相比其他系統是非常低的。</p><p>　　功率控制的另外一個優點是它可以延長使用最低功率傳輸?shù)碾姵貕勖７聪蜴溌饭β士刂圃诮?遠效果的影響下比前向鏈路更加嚴格。在一個前向鏈路中，為了減少小單元之間

67、的干擾，功率控制仍是必要的。</p><p>　　功率控制可以以集中或者分布的形式工作。中央控制器接收所有渠道的連接信息，并控制其傳輸功率水平。集中式的方法可以優化整個網絡或網絡的一部分，因此用電量是非常高效的。這需要在網絡中廣泛地控制信號，然而在實際中則難以應用。</p><p><b>　　3 GPRS的架構</b></p><p>　　G

68、PRS被視為GSM的傳送功能。它是由ETSI設計的，在不干擾現有服務的情況下實施了現有的GSM的基礎設施。這樣做的目的是在對現有的GSM PLMN影響最小的情況下加快GPRS的部署。圖1說明了支持GPRS的GSM網絡的邏輯結構。</p><p>　　圖1 GPRS網絡的體系結構</p><p><b>　　3.1 移動站</b></p><p

69、>　　GPRS和GSM系統在用戶之間提供了跨工作和動態共享資源的服務。出于這樣的原因，三個類型的終端已經被確定：A類的MS可以攜帶一種電路交換和一種分組交換連接，在不中斷數據傳輸?shù)耐瑫r發起或接受語音呼叫。這種類型的終端由于其性能復雜成本高，可能無法使用GPRS的最初部署。B類的MS是能夠在同一時間連接到GSM和GPRS，但一接到語音電話時，GPRS數據交換可以為語音呼叫而暫停。GPRS數據交換可在語音通話結束后恢復使用。最后，一個

70、C類的MS允許用戶在一個特定的時間以一種特定方式訪問。</p><p>　　GPRS的質譜有兩個組成部分：一是MT（移動終端），它就是通常作為無線調制解調器用于訪問無限接口的手機；二是TE（終端設備），通常是一個筆記本電腦或一個PDA（個人數字助理）。GPRS的MS也可作為將MT和TE相結合的單元。</p><p><b>　　3.2 基站子系統</b></p&

71、gt;<p>　　GPRS對于現有的GSM BSS只有很小的影響，這樣不用進行大型的修改的時候就可以重用現有的組件和鏈接。這是由可行性的，因為GPRS就和GSM一樣采用同樣的頻段，同樣的TDMA幀結構和突發結構。</p><p>　　一個叫PCU（分組控制單元）的新的功能組件被添加到GPRS標準中的BSS里去支持數據包的處理。PCU被邏輯地放置在BSS和GPRS NSS中。與語音電路連接不同的是，只

72、有當數據需要通過空中接口傳輸?shù)臅r候，GPRS連接必須建立和釋放在BSS和MS之間。因此，歐洲電信標準協會定義了新的程序去適應這種連接方式。</p><p>　　3.3 網絡交換子系統</p><p>　　GPRS NSS可以被看做是確保移動用戶和數據網絡之間連接的覆蓋網絡。GPRS在GSM基礎設施中加入了一個新的功能元素：GSN（GPRS支持節點），它可以是一個SGSN或者是一個GGSN。

73、這在GSM網絡中用于支持分組數據服務是非常必要的。網絡一般被分為幾個由獨立SGSN控制的服務地區。在某一特定時間內，在其服務范圍內只有一個SGSN服務一個MS。SGSN的主要職責就是追蹤它所服務的MS，并且負責數據訪問控制服務。在另一方面，GGSN提供連接到外部PDN的接口。SGSN通過幀與BSS連接，并且通過GPRS骨干網與幾個GGSN連接。HLR數據更新用于覆蓋GPRS的用戶信息。改變現有的MSC/VLR并不是必須的，但GPRS標準

74、提出一些SGSN和MSC之間的協調改進建議和兩個接口之間的選擇則是可以被支持的。</p><p>　　在GPRS中引入了幾個接口用于定義實體之間的相互作用。例如，在BSC和SGSN之間需要Gb接口。</p><p><b>　　4 總結</b></p><p>　　GPRS作為GSM網絡承擔服務代理代表了如UMTS這樣下一代無線移動網絡的重大發