生物醫學工程外文翻譯 (2)

1、<p><b>　　畢業論文（設計）</b></p><p><b>　　外文翻譯</b></p><p>　　譯文題目:全自動生化分析儀常見故障診斷、分析與維修（側重維修） </p><p>　　學生姓名：劉凱 學 號：050921044 </p><p>　

2、　專 業：生物醫學工程 方 向：醫療器械 </p><p>　　指導教師：但漢久 </p><p>　　2008年12月24日</p><p>　　Design and Development of Microcontroller-Based Clinical Chemistr

3、y Analyser for Measurement of Various Blood Biochemistry Parameters</p><p>　　S. R. Taneja, R. C. Gupta, Jagdish Kumar, K. K. Thariyan, and Sanjeev Verma,</p><p>　　Journal of Automated Methods &a

4、mp; Management in Chemistry, India</p><p>　　Clinical chemistry analyser is a high-performance microcontroller-based photometric biochemical analyser to measure various blood biochemical parameters such as bl

5、ood glucose, urea, protein, bilirubin, and so forth, and also to measure and observe enzyme growth occurred while performing the other biochemical tests such as ALT (alkaline amino transferase), amylase, AST (aspartate a

6、mino transferase), and so forth. These tests are of great significance in biochemistry and used for diagnostic purpos</p><p>　　light source, an optical module, interference filters of various wave lengths, p

7、eltier device for maintaining required temperature of the mixture in flow cell, peristaltic pump for sample aspiration, graphic LCD display for displaying blood parameters, patients test results and kinetic test graph, 4

8、0 columns mini thermal printer, and also 32-key keyboard for executing various functions. The lab tests conducted on the instrument include versatility of the analyzer, flexibility of the software, an</p><p>

9、;　　1. INTRODUCTION</p><p>　　In order to measure the progress of an enzymatic reaction and to measure the total change in the concentration of the reactant/substrate, various techniques [1] such as spectropho

10、tometric, polarometric, amperometric, electrochemical, coulometric, polarography, radiochemical, and fluorescence are available. Instrument developed works on the principle of absorbance transmittance photometry. It is a

11、 highperformance,microcontroller-based, photometric biochemical analyser to measure various blood bio</p><p>　　the load on clinical laboratories to a great extent by reducing the time taken in the test and m

12、inimizing the involvement of laboratory staff. Instrument developed is classified as semiautomated analyser [2] and has advantages of precision and accuracy. These systems are used in hospitals to test various blood bioc

13、hemical parameters. All primary health centres, community health centres, and district hospitals are the potential users of this machine.</p><p>　　2. MATERIALS AND METHODS</p><p>　　2.1. The inst

14、rument</p><p>　　(i) Design principle</p><p>　　The instrument is designed using the principle of absorbance transmittance photometry. According to Lambert and Beer’</p><p>　　Figure 1

15、: Schematic of Lambert and Beer’s law.</p><p>　　Figure 2: Relation between percent transmission and concentration.</p><p>　　law [3], when monochromatic light is passed through coloured solution,

16、 the intensity of the transmitted light decreases exponentially with the increase in concentration of the absorbing substance. The value of absorption of light energy is dependent on the number of molecules present in ab

17、sorbing material and the thickness of the medium. Thus,intensity of light energy leaving the absorbing substance is used as an indication of concentration of that particular substance.As shown in Figures 1 and </p>

18、<p>　　It = I0e- kct (1)</p><p>　　and transmission</p><p>　　T = It/ I0 = e- kct

19、 (2)</p><p>　　log e T=- kct (3)</p><p>　　log e(1/ T) = kct (4)</p>&l

20、t;p>　　where c is the concentration of absorbing material, t thickness of the light path, and k absorption constant. </p><p>　　The quantity (-logT) or log(1/T) is termed as extinction E/OD or the absorbanc

21、e:</p><p>　　A=log(1/T)=log100/(%transmission) (5)</p><p>　　A = 2- log(%transmission).</p><p>　　Therefore A = kct.</p><p>　　If t

22、 is constant, then AαC.</p><p>　　In this system, the basic requirement is to measure optical density/absorbance and then concentration of the test parameter under run accurately.</p><p>　　(ii)Mi

23、crocontroller-based hardware</p><p>　　Figure 3 represents the basic modules of the system; a light source, an optical module, a filter wheel, a quartz cuvette with reaction mixture, a photo detector, and sig

24、nal processing circuitry based on microcontroller. Overall systemdesign is shown in Figure 4. The block diagram can be subdivided into the following major parts:</p><p>　　(i) the microcontroller and memories

25、,</p><p>　　(ii) peripherals and interfaces.</p><p>　　System design is based around 80C31 microcontroller [4] connected through address bus, data bus, and control bus to the 64 kbytes of EPROM 27

26、C512 for monitor and control program, 24 kbytes of RAM with battery backup for temporary data storage, 24-hour results storage capacity, and peripheral I/O devices 8255 s are used for interfacing 32-key keyboard, 12-bit

27、A/D converter, 40 column thermal mini printer, and 30 characters × 8 lines alphanumeric/graphic LCD display. Alphanumeric keyboard contains</p><p>　　(iii) Peltier-based temperature controller</p>

28、<p>　　System developed is used to determine both enzyme activity and substrate concentration in biological fluids at different temperatures 25 °C, 30°C, and 37°C by initial rates using fixed time, en

29、d point, and kinetic methods. System allows selecting any required temperature and maintains the temperature of flow cell at that selected temperature because enzymes are relatively fragile substances which have a tenden

30、cy to undergo inactivation or denaturation [1]. So to get the proper enzymatic rate and</p><p>　　Figure 3: Block diagram of clinical chemistry analyser.</p><p>　　Figure 4: Microcontroller-based

31、hardware design of clinical chemistry analyser.</p><p>　　and peltier device are used to provide and maintain the required temperature for the samples in flow cell. Peltier works in both directions for coolin

32、g and heating. This effect is used to control the temperature of the sample.</p><p>　　(iv) Peristaltic pump/aspiration system</p><p>　　Port1 of 8031 microcontroller is interfaced with a stepper

33、motor through a driver hardware that drives the roller type of peristaltic pump which generates the required sequence of pulses for the motor driving hardware. The driver hardware enhances the level of voltage for pulse

34、sequences required for the stepper motor. Roller type peristaltic pump used in the system is aspirating the required volume of reagents/samples and for washing the flow cell. This pump can be calibrated to aspirate the r

35、e</p><p>　　(v) Optical module and filter wheel assembly</p><p>　　Optical module consists of a light source with reflector, condenser system, collimating objectives, flow cell, filter wheel assem

36、bly, and photodiode. Halogen lamp is used as a light</p><p>　　Figure 5: Isometric view of filter wheel assembly and Peltier device.</p><p>　　source. A constant current power supply is used to po

37、wer the lamp to reduce the fluctuations in the light. All optical components have been designed with quartz glass to have good transmission in UV region at 340 nm. Keeping in view the low response of photo detector in UV

38、 (340 nm), all the optical components have been provided with enhanced antireflection coating in the UV region. In the opto-mechanical assembly, special care has been taken in the design so that each component is properl

39、y align</p><p>　　2.2. Methods</p><p>　　(i) Signal processing</p><p>　　Advances in electronics and microcontroller technology have played a central role in signal processing [5]. Com

40、puters are included in automated analysis for data acquisition and processing of analytical data. Output of photodiode and preamplifier is a voltage which varies directly with the light which is passed through the flow c

41、ell and selected wavelength filter. Preamplifier gain is selected automatically as per the selected test parameter and filter. Output of preamplifier is converted into d</p><p>　　2.3. Methods for calculation

42、</p><p>　　The instrument developed works in four different modes such as concentration (end point), kinetic mode, fixed-time mode, and absorbance mode. For measurement of concentration in different modes, di

43、fferent formulas are used as shown below.</p><p>　　(1) Concentration (end point)mode:</p><p>　　Concentration of sample=Abs. Sample×(Conc. of Standard/Abs. of Standard) </p><p>

44、;　　(6) </p><p><b>　　Or </b></p><p>　　Concentration of sample = Abs. Sample × F. (7)</p><p>　　(2)

45、Kinetic mode:</p><p>　　Concentration (U/L)=ΔAbs ./ Min×( Conc. of Standard/Abs/min of Standard) </p><p>　　(8) </p><p>　　Or

46、 =ΔAbs / Min×F.</p><p>　　(3) Fixed-time mode:</p><p>　　Concentration (U/L)=ΔAbs×( Conc. of Standard/Abs/min of Standard) </p><p>　　(9)

47、 </p><p>　　Or =ΔAbs×F.</p><p>　　Figure 6: Flow diagram of system software.</p><p><b>　　Where</b></p&

48、gt;<p>　　F = T.V. × 106/(S.V. × Absorptivity × P) (10)</p><p>　　T.V. is total reaction volume, S.V. is sample volume, P is path length in cm, Abs. is absorban

49、ce, Conc. is concentration, and Min. is minute.</p><p>　　2.4. System software</p><p>　　The layout of the steps followed in the development of the software of the instrument has been provided in

50、the flow chart shown in Figures 6 and 7. On the basis of this flow diagram, system software has been developed using “C” cross compiler [7, 8] for Intel 8031 microcontroller in modular form. System software is menu drive

51、n and user friendly. Many advance features have been incorporated in the software for fast and robust operation. The main program calls the subfunctions and executes them ac</p><p>　　3. RESULTS AND DISCUSSIO

52、N</p><p>　　In this system, the programming, reading, and reporting operations are easy and user friendly. The instrument is provided with a keyboard which facilitates quick change from one function to anothe

53、r and setting of parameters which can be monitored on LCD with both alphanumeric as well as graphics capabilities without going through complex sequential operations. Printer in the system is used for test reports of the

54、 patients. The system was clinically evaluated successfully over 1000 blood samples </p><p>　　Figure 7: Flow diagram of system software.</p><p>　　4. CONCLUSION</p><p>　　The instrume

55、nt developed is universally useful for small clinical laboratories, big hospitals, and nursing homes for qualitative analysis of blood. The instrument is capable of handling a reasonable amount of workload. The work orga

56、nization of the instrument is most efficient when batches of tests are analyzed together. In this way, a discretionary approach can be achieved without affecting the performance of instrument. End point samples can be gi

57、ven priority at any time during a routine run.Me</p><p>　　ACKNOWLEDGMENTS</p><p>　　The authors are deeply grateful to Dr Pawan Kapur, Director,Dr P. K. Jain and Mr P. K. Goel, Scientists of CSIO

58、,Chandigarh, and Dr Jasbinder Kaur, Acting Head, Department of Biochemistry, GMCH-32, Chandigarh, for providing the necessary facilities and help during the progress of work and clinical evaluation of the system. The pro

59、ject was sponsored by the Department of Science and Technology, New Delhi, India.</p><p>　　REFERENCES</p><p>　　[1] G. G. Guilbault, Study of Handbook of Enzymatic Methods of Analysis, Marcel Dek

60、ker, New York, NY, USA, 1976.</p><p>　　[2] R. Haeckel, “General principles for the classification of analysers,”Journal of Automated Methods and Management in Chemistry, vol. 10, no. 4, pp. 164–166, 1988.<

61、;/p><p>　　[3] D. C. Harris, Quantitative Chemical Analysis, W. H. Freeman & Company, New York, NY, USA, 4th edition, 1995.</p><p>　　[4] I. S. MacKenzie, The 8051 Microcontroller, Prentice-Hall,

62、 Englewood Cliffs, NJ, USA, 2nd edition, 1995.</p><p>　　[5] P. A. Bonini, F. Ceriotti, and C. Franzini, “Selectivity and random-access in automatic analysers,” Journal of Automated Methods and Management in

63、Chemistry, vol. 10, no. 4,pp. 167–170, 1988.</p><p>　　[6] T. W. Schultz, C and the 8051, vol. I: Hardware, Modular Programming& Multitasking, Prentice-Hall, Englewood Cliffs,NJ, USA, 2nd edition, 1998.&l

64、t;/p><p>　　[7] UserManual 8051 C Complier Programming Guide for Intel’s 8051 Microcontroller Family, IAR SYSTEMS.</p><p>　　[8] User Manual winIDEATM Version 9.0, Integrated Development Environment,

65、 Software User’s Guide,iSYSTEM.</p><p>　　[9] P. A. Bonini, E. Callioni, F. Ceriotti, et al., “Multicentre evaluation of the IL densiscan,” Journal of AppliedMathematics and Stochastic Analysis, vol. 8, no. 1

66、, pp. 18–22, 1986.</p><p>　　[10] “Technical manual of Clinical Chemistry Analyser developed by CSIO,” 2003.</p><p>　　設計和開發以微控制器為基礎的測量不同血液生化參數的微控制器化學分析儀</p><p>　　S. R. Taneja, R. C.

67、Gupta, Jagdish Kumar, K. K. Thariyan, and Sanjeev Verma, Journal of Automated Methods & Management in Chemistry, 印度</p><p>　　臨床化學分析儀是一種高性能，以微控制器為基礎的生化分析儀，測量各種血液生化指標，如血糖，尿素，蛋白質，膽紅素，等等，而且要衡量和觀察酶增長時發生的其他生

68、化檢驗如轉氨酶（堿性氨基酸轉移酶） ，淀粉酶，轉氨酶（天門冬氨酸氨基轉移酶） ，等等. 這些試驗具有重要的生物化學意義和用于診斷、分類各種疾病，如糖尿病，肝臟正常，腎臟疾病，等等. 作者在此文介紹了一種廉價的臨床化學分析儀的研制. 它一個開放系統，其中任何市場上的試劑盒可以被使用.該系統的以吸收透射光度法為基礎，基于80C31單片機的RAM ， EPROM和外設接口設備，采用光源，光學模塊，干擾過濾器的各種波長，致冷設備維護所需的溫度，

69、在流動細胞混合，蠕動泵樣品愿望，平面液晶顯示器顯示血液指標，病人的測試結果和動力學測試圖， 40列微型熱敏打印機，也32鍵鍵盤以執行各項職能。</p><p>　　該實驗室進行測試的工具包括多功能的分析，靈活的軟件和處理的樣品。該原型測試和評估了1000血樣成功17血液參數。評估工作是在政府的醫學院和醫院，生物化學系。試驗結果被認為是可與其他標準的文書。</p><p><b>

70、　　1. 導言</b></p><p>　　為了衡量進展的酶促反應，并衡量總濃度變化的反應/基板，各種技術[1]，如分光，偏振，安培，電化學，庫侖，極譜法，放射化學和熒光可用。儀器研制工作的原則吸光度透射光度法. 這是一個高性能，微控制器為基礎的，光度生化分析儀測量各種血液生化指標，如血糖，尿素，蛋白質，膽紅素，等等，而且要衡量和觀察酶增長表演時發生的其他生化檢驗，如轉氨酶（堿性氨基酸轉移酶） ，淀粉

71、酶，轉氨酶（天門冬氨酸氨基轉移酶） ，等等。生化檢驗是非常重要的，因?yàn)樗鼈兣c各種障礙和疾病，如糖尿病，腎臟疾病，肝臟發生故障，以及其他代謝失常 。這些參數的量化有助于疾病的分類，并在適當?shù)那闆r下，結果是用于診斷. </p><p>　　近年來，由于臨床化學自動化的發展與變化，工具已經自動化。自動化臨床文書帶來了一場醫療儀器領域的革命。它已減少臨床實驗室上的負載，在很大的程度上減少了時間，并盡量減少參與的實驗室工作

72、人員。儀器開發被列為半自動儀儀器[ 2 ] ，具有精密度和準確度。這些系統可用于醫院，以測試各種血液生化指標。所有初級保健中心，社區保健中心，和區 級醫院都可以使用本機。</p><p>　　2 .材料和方法2.1 .儀器（i）設計原則該儀器的設計原則是吸收透射光度法。據朗伯-比爾定律[ 3 ] ，當單色光是通有色溶液時，透射光強度隨溶液濃度的增加質而降低。吸收光與物質濃度和厚度有光。因此，一定強度的入射

73、光通過有色溶液，由透射光可以說明物質的濃度，如圖1和圖2所示：</p><p>　　圖1: Lambert and Beer’s定律.示意圖</p><p>　　圖2: 透光率與濃度的關系</p><p>　　然后根據此法： It = I0e- kct

74、 (1)</p><p><b>　　變換為</b></p><p>　　T = It/ I0 = e- kct (2)</p><p>　　log e T=- kct

75、 (3)</p><p>　　log e(1/ T) = kct (4)</p><p>　　其中c是溶液濃度，T是光路通過溶液的厚度，K的吸收常數。（- logT）或（1 / t）為稱為E/OD吸光度：</p>&

76、lt;p>　　A=log(1/T)=log100/(%transmission) (5)</p><p>　　A = 2- log(%transmission).</p><p>　　因此， A = kct.</p><p>　　如果 t是常數,那么AαC.</p>

77、<p>　　在這一系統中，基本的要求是衡量光密度/吸收，然后準確濃度下運行測試參數。 （ii）基于微控制器的硬件 圖3是基本的系統模塊由光源，光學模塊，一個過濾器方向盤，石英試管與反應混合物，照片探測器和基于單片機信號處理電路。整個系統設計如圖4所示?？驁D可細分為以下幾個主要部分組成： （i）微控制器和存儲器（ii）外設和接口 系統設計是基于80C31單片機[ 4 ]，通過連接地址總線，數據總線和控制總線的64千

78、字節的EPROM 27C512的監測和控制程序， 24字節的RAM的備用電池的臨時數據存儲， 24小時的結果存儲容量和外設 ，I / O設備8255秒用于接口的32鍵鍵盤， 12位A / D轉換器， 40個欄熱微型打印機， 30個字符× 8行字母/圖形液晶顯示屏。鍵盤包含各種功能鍵，數字鍵和復位鍵選擇各種功能的系統和參數設置，液晶用于顯示日期和時間，各種菜單，參數，從鍵盤輸入的數據，以及病人的結果和一些動力學圖所要求的測試參數

79、。 12位A / D轉換器將模擬信號的光檢測器及前置放大器裝換為數字形式。 40柱熱微型打印機用于硬盤副本參數存儲，病人的測試結果，收集報告和動力學圖表顯</p><p>　　系統開發是用來判斷兩個酶活性和底物濃度，在生物流體在不同溫度25 ℃ ， 30 ° C和37 ° C的初始利率，采用固定的時間，終點，和動力學方法。系統可以選擇任何所需的溫度和溫度保持細胞的流動在選定的溫度，因?yàn)槊甘窍鄬?duì)

80、脆弱的物質，有失活或變性[ 1 ] 的傾向。因此，要得到適當酶解率和提高他們的穩定，必須經過妥善處理，同時進行測試并且必須保持在所需溫度。溫度傳感器LM355 和致冷設備是用來為流動樣品細胞提供和維護所需的溫度?？梢岳鋮s和加熱。這是用來控制溫度的范例。</p><p>　　圖 3: 生化分析儀框圖</p><p>　　圖 4: 微控制器為基礎臨床化學分析儀的硬件設計</p>

81、<p>　?。╥v）蠕動泵/吸系統</p><p>　　Port1是8031微控制器接口與步進電機驅動器，通過一個硬件驅動輥型蠕動泵，產生所需的脈沖序列的電機驅動的硬件。驅動器硬件水平提高步進電機的需要電壓脈沖序列。輥型蠕動泵中使用的除塵系統所需的貨量試劑/樣品及洗滌。這種泵可校準抽吸所需數量的水，試劑和樣品。 （v）光學模塊和過濾器盤裝配光模塊由光源反射器，冷凝器系統，直目標，流動細胞，篩選車輪裝

82、配和光電二極管。鹵素?zé)糇鳛楣庠?。恒定電流電源供?yīng)器是用來作為燈電源，以減少波動的光。所有光學元件與石</p><p>　　圖 5: 等距輪篩選裝置和致冷設備</p><p>　　英玻璃具有良好的紫外區340納米波長光的的傳輸。同時考慮到在紫外線（ 340納米）光檢測器低反應，所有的光學元件提供了在紫外線區域的增透膜。在光學機械裝配，采取特殊的設計，使每一個組成部分適當?shù)呐浜瞎廨S。要獲得所需

83、波長的光通過， 6干擾過濾器的過濾不同波長，如340納米， 405納米， 505納米， 546納米， 578納米和630納米，從紫外區，以可見光區光譜（ 300nm的700納米） ，已安裝在過濾器方向盤上。這些過濾器會自動選擇不同的測試狀態。當過濾器選擇所需的波長，相應的增益也自動選擇。該過濾器裝置是由步進機驅動，這是微控制器控制驅動電路。脈沖的產生需要按照順序輪流在電機所需的角度，使過濾器前面的光檢測器。圖5是過濾器裝置裝配圖。<

84、;/p><p><b>　　2.2. 檢測方法</b></p><p><b>　　(i) 信號處理</b></p><p>　　信號處理在電子新進展和微控制器技術中都發揮了核心作用，[5]. 計算機被用來自動分析數據采集與處理分析數據. 流動細胞電壓變化由光電二極管和放大器是和某些波長濾波器輸出. 放大器增益按選定的測試參數

85、和過濾器自動調整。輸出放大器由12位模數轉換器轉換成數字。單片機根據適當?shù)挠?jì)算算法計算這些數字值 [6].</p><p><b>　　2.3. 算法</b></p><p>　　該儀器研制工程有四個不同的模式，如濃度（終點） ，動力學模式，固定時間模式，和吸收模式。不同的濃度測量模式，用不同的公式來表示。</p><p>　　(1) 濃度（終

86、點）模式：</p><p>　　Concentration of sample=Abs. Sample×(Conc. of Standard/Abs. of Standard) </p><p><b>　　(6)</b></p><p><b>　　或 </b></p><p>

87、;　　Concentration of sample= Abs. Sample ×F. (7)</p><p>　　(2) 動力學模式：</p><p>　　Concentration (U/L)=ΔAbs ./ Min×( Conc. of Standard/Abs/min of Standard) </p>

88、<p>　?。?） </p><p>　　或 =ΔAbs / Min×F.</p><p>　　(3) 固定時間模式:</p><p>　　Concentration (U/L)=ΔAbs×(

89、 Conc. of Standard/Abs/min of Standard) </p><p>　?。?） </p><p>　　或 =ΔAbs×F.</p><p>　　圖 6:軟件系統流程圖<

90、/p><p>　　F = T.V. × 106/(S.V. × Absorptivity × P) (10)</p><p>　　T.V. 表示總反應體積S.V.表示樣本量, P 表示 路徑長度（cm）, Abs. 表示吸光度, Conc. 表示濃度, and Min. 表示最小值。</p><p>　

91、　2.4. 系統軟件 </p><p>　　軟件工具的發展，遵循了如圖6，7所示的布局. 以此流程圖為基礎，系統軟件已經開發使用以Intel 8031微處理器為單元形式“ C ”交叉編譯器[ 7 ， 8 ]。系統軟件是由客戶在菜單上操作 軟件中有許多高級功能，并能快速，穩定的運行. 主程序調用并執行相應的子程序. 系統軟件是儲存在系統存儲器中。</p><p><b>　　3.

92、結果和討論</b></p><p>　　在著個系統中,他節目，閱讀，和報告用戶很容易操作. 該儀器提供了便利的改變參數設置的快捷鍵，可監測液晶屏上字母以及圖形處理，而不必通過復雜的操作.系統中的是用于打應印病人的測試報告. T這個系統，在生物化學系GovernmentMedical學院及醫院，部門- 32 ，昌迪加爾成功的臨床評價超過1000的血液樣本。 17日血液指標進行了分析，結果被是令人滿意的.

93、</p><p>　　Figure 7: Flow diagram of system software</p><p><b>　　4. 結論</b></p><p>　　該儀器在發達國家普遍用于小型臨床實驗室，大醫院和療養院的定性血液分析. 該儀器能夠處理一個適當?shù)墓ぷ髁?。最有效的工作是批次的試?yàn)樣品是一起分析. 通過這種方式，可以實現在不

94、影響性能的工作方式. 終點樣品可優先考慮在任何時候在例行運行. 菜單驅動的系統軟件提供了一個友好的環境，有許多吸引人的特點，便于操作的培訓，運營商要求最低。這一系統的這項技術已轉入印度[10].</p><p><b>　　致謝</b></p><p>　　作者非常感謝帕卡普爾博士、主任，昌迪加爾CSIO的科學家PK Jain博士和PK戈埃爾，昌迪加爾生物化學系GMC

95、H - 32代理團長Jasbinder考爾博士提供必要的設施和工作中的幫助以及臨床評價。該項目是由科學技術部資助，印度新德里</p><p><b>　　參考文獻：</b></p><p>　　[1] G. G. Guilbault, Study of Handbook of Enzymatic Methods of Analysis, Marcel Dekker,

96、New York, NY, USA, 1976.</p><p>　　[2] R. Haeckel, “General principles for the classification of analysers,”Journal of Automated Methods and Management in Chemistry, vol. 10, no. 4, pp. 164–166, 1988.</p&g

97、t;<p>　　[3] D. C. Harris, Quantitative Chemical Analysis, W. H. Freeman & Company, New York, NY, USA, 4th edition, 1995.</p><p>　　[4] I. S. MacKenzie, The 8051 Microcontroller, Prentice-Hall, Engl

98、ewood Cliffs, NJ, USA, 2nd edition, 1995.</p><p>　　[5] P. A. Bonini, F. Ceriotti, and C. Franzini, “Selectivity and random-access in automatic analysers,” Journal of Automated Methods and Management in Chemi

99、stry, vol. 10, no. 4,pp. 167–170, 1988.</p><p>　　[6] T. W. Schultz, C and the 8051, vol. I: Hardware, Modular Programming& Multitasking, Prentice-Hall, Englewood Cliffs,NJ, USA, 2nd edition, 1998.</p&

100、gt;<p>　　[7] UserManual 8051 C Complier Programming Guide for Intel’s 8051 Microcontroller Family, IAR SYSTEMS.</p><p>　　[8] User Manual winIDEATM Version 9.0, Integrated Development Environment, Soft

101、ware User’s Guide,iSYSTEM.</p><p>　　[9] P. A. Bonini, E. Callioni, F. Ceriotti, et al., “Multicentre evaluation of the IL densiscan,” Journal of AppliedMathematics and Stochastic Analysis, vol. 8, no. 1, pp.