版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領
文檔簡介
1、<p> Industrial Robots and Electric drive system </p><p> There are a variety of definitions of the term robot. Depending on the definition used, the number of robot installations worldwide varies wid
2、ely. Numerous single-purpose machines are used in manufacturing plants that might appear to be robots. These machines are hardwired to perform a single function and cannot be reprogrammed to perform a different function.
3、 Such single-purpose machines do not fit the definition for industrial robots that is becoming widely accepted. This definition was develo</p><p> A robot is a reprogrammable multifunctional manipulator des
4、igned to move material, parts, tools, or specialized devices through variable programmed motions for the performance of a variety of tasks.</p><p> Note that this definition contains the words reprogrammabl
5、e and multifunctional. It is these two characteristics that separate the true industrial robot from the various single-purpose machines used in modern manufacturing firms. The term “reprogrammable” implies two things: Th
6、e robot operates accommodate a variety of manufacturing tasks.</p><p> The term “multifunctional” means that the robot can, through reprogramming and the use of different end-effectors, perform a number of
7、different manufacturing tasks. Definitions written around these two critical characteristics are becoming the accepted definitions among manufacturing professionals.</p><p> The first articulated arm came a
8、bout in 1951 and was used by the U.S. Atomic Energy Commission. In 1954, the first programmable robot was designed by George Devil. It was based on two important technologies:</p><p> Numerical control (NC)
9、 technology.</p><p> Remote manipulator technology.</p><p> Numerical control technology provided a form of machine control ideally suited to robots. It allowed for the control of motion by st
10、ored programs. These programs contain data points to which the robot sequentially moves, timing signals to initiate action and to stop movement, and logic statements to allow for decision making.</p><p> Re
11、mote manipulator technology allowed a machine to be more than just another NC machine. It allowed such machines to become robots that can perform a variety of manufacturing tasks in both inaccessible and unsafe environme
12、nts. By merging these two technologies, Devil developed the first industrial robot, an unsophisticated programmable materials handling machine.</p><p> The first commercially produced robot was developed in
13、 1959. In 1962, the first industrial robot to be used on a production line was installed by General Motors Corporation. This robot was produced by Animation. A major step forward in robot control occurred in 1973 with th
14、e development of the T-3 industrial robot by Cincinnati Milacron. The T-3 robot was the first commercially produced industrial robot controlled by a minicomputer.</p><p> Numerical control and remote manipu
15、lator technology prompted the wide-scale development and use of industrial roots. But major technological developments do not take place simply because of such new capabilities. Something must provide the impetus for tak
16、ing advantage of these capabilities. In the case of industrial robots, the impetus was economics.</p><p> The rapid inflation of wages experienced in the 1970s tremendously increased the personnel costs of
17、manufacturing firms. At the same time, foreign competition became a serious problem for U.S. manufacturers. Foreign manufacturers who had undertaken automation on a wide-scale basis, such as those in Japan, began to gain
18、 an increasingly large share of the U.S. and world market for manufactured goods, particularly automobiles.</p><p> Through a variety of automation techniques, including robots, Japanese manufacturers, begi
19、nning in the 1970s, were able to produce better automobiles more cheaply than no automated U.S. manufacturers. Consequently, in order to survive, U.S. manufacturers were forced to consider any technological developments
20、that could help improve productivity.</p><p> Though a variety of automation techniques, including robots, Japanese manufacturers, beginning in the 1970s, were able to produce better automobiles more cheapl
21、y than no automated U.S. manufacturers. Consequently, in order to survive, U.S. manufacturers were forced to consider any technological developments that could help improve productivity.</p><p> It became i
22、mperative to produce better products at lower costs in order to be competitive with foreign manufacturers. Other factors such as the need to find better ways of performing dangerous manufacturing tasks contributed to the
23、 development of industrial robots. However, the principal rationale has always been, and is still, improved productivity.</p><p> One of the principal advantages of robots is that they can be used in settin
24、gs that are dangerous to humans. Welding and parting are examples of applications where robots can be used more safely than humans, Even though robots are closely associated with safety in the workplace, they can, in the
25、mselves, be dangerous.</p><p> Robots and robot cells must be carefully designed and configured so that they do not endanger human workers and other machines. Robot work envelopes should be accurately calcu
26、lated and a danger zone surrounding the envelope clearly marked off. Red flooring strips and barriers can be used to keep human workers out of a robot’s work envelope.</p><p> Even with such precautions it
27、is still a good idea to have an automatic shutdown system in situations where robots are used. Such a system should have the capacity to sense the need for an automatic shutdown of operations. Fault-tolerant computers an
28、d redundant systems can be installed to ensure proper shutdown of robotics systems to ensure a safe environment.</p><p> The robot electrically operated servo drive system sds is uses the moment of force an
29、d the strength which each kind of electric motor produces, directly or indirectly actuates the robot main body to obtain the robot each kind of movement implementing agency. The electric motor actuates which to the indus
30、try robot joint, the request has the maximum work rate quality compared to with the torque inertia compared to, rises up the dynamic torque, the is low inertia and broader also the smooth velocit</p><p> Th
31、e robot actuates the electrical machinery to the joint overriding demand the gauge natrium as follows:</p><p> 1) rapidity. The electric motor from obtains the command signal to complete the active status t
32、ime which the instruction requests to be supposed to be short. Response command signal time shorter, the electricity servosystem sensitivity higher, the fast response performance is better, generally is explains the serv
33、o motor fast response by the servo motor mechanical and electrical time-constant size the performance. </p><p> 2) the starting moment inertia is bigger than. In in the actuation load situation, requests t
34、he robot the servo motor starting moment in a big way, the rotation inertia is small.</p><p> 3) the control characteristic continuity and the straight line, along with the control signal change, the electr
35、ic motor rotational speed can continuously change, sometimes also needs the rotational speed and the control signal has the direct ratio or approximately has the direct ratio.</p><p> 4) modulates velocity
36、the scope to be wide. Can use to 1: 1,000 ~ 10,000 velocity modulation scopes.</p><p> 5)the volume small, the quality small, the axial size is short.</p><p> 6) can undergo the harsh movement
37、 condition, may carry on the extremely frequent pro and con to and adds and subtracts the fast movement, and can withstand the overload in the short time.</p><p> Industry robot direct motor drive principle
38、 like chart 1 shows. The industry robot electrically operated servosystem general structure is three closed-loops control, namely electric current link, speed ring and snap ring. </p><p> At present the ove
39、rseas many electric motors produce the factory to develop the actuation product which suitably matches with the exchange servo motor, the user act according to oneself need the function stress to choose the different ser
40、vo-control way differently, in the ordinary circumstances, exchanges the servo driver below, passable has carried on the artificial hypothesis to its internal function parameter to realize the function:</p><p&
41、gt; 1) position control way; </p><p> 2) speed control way; </p><p> 3) torque control mode;</p><p> 4) position, speed mixed mode;</p><p> 5) position, torque mix
42、ed mode;</p><p> 6)speed, torque mixed mode; </p><p> 7) torque limitation; </p><p> 8) the position deviation oversized reports to the police;</p><p> 9) speed PID
43、 parameter establishment; </p><p> 10) speed and acceleration forward feed parameter establishment;</p><p> 11) zero floats compensates the parameter establishment; </p><p> 12)
44、adds and subtracts the fast time establishment and so on </p><p> 1. direct current servo motor driver direct current servo motor driver to use the pulse-duration modulation (PWM) the servo driver, changes
45、through the change pulse width adds in the motor armature beginnings and ends average voltage, thus changes the electric motor the rotational speed. The PWM servo driver has the velocity modulation scope width, the low-s
46、peed characteristic well, responds, the efficiency quickly high, the overload capacity is strong and so on the characteristic, often takes t</p><p> 2. synchronized types exchange servo motor driver same di
47、rect current servo motor actuates the system to compare, the synchronized type exchange servo motor driver has the torque rotation inertia electronics brush and commutation spark merit and so on to be higher than, not to
48、 have, obtains the widespread application in the industry robot. The synchronized type exchange servo motor driver usually uses the electricity flow pattern pulse-duration modulation (PWM) the inversion and has the elect
49、ric</p><p> 1) rectangular wave electric current actuation permanent magnetism A.C. servomechanism. </p><p> 2) sinusoidal current actuation permanent magnetism A.C. servomechanism. Uses the r
50、ectangular wave electric current actuation the permanent magnetism exchange servo motor to be called not brushes the direct current servo motor, uses he sinusoidal current actuation the permanent magnetism exchange serv
51、o motor to be called not brushes the exchange servo motor. </p><p> 3. direct drives so-called direct drives (DD) the system, is the load conductive coupling which the electric motor if actuates in the same
52、 place, middle does not have any reduction gear. The same traditional electric motor servo actuates to compare, the DD actuation reduced the reduction gear, thus reduced the gap which in the system transmission process t
53、he reduction gear produces and becomes less crowded, enormously increased the robot precision, simultaneously also reduced because the reducti</p><p> 1) outputs the torque in a big way: For tradition drive
54、 type in servo motor output torque 50 ~ 100 times. </p><p> 2) torque pulsation small: The DD electric motor torque pulsation may suppress in the output torque 5% ~ in 10%. </p><p> 3) efficie
55、ncy: With uses the reasonable impedance matching the electric motor (under tradition drive type) to compare, the DD electric motor is works under the power conversion worse exploitation conditions. Therefore, the load is
56、 bigger, more favors to selects a bigger electric motor. </p><p> At present, the DD electric motor mainly divides into changes the magnetic resistance and changes the magnetic resistance mixed type, has fo
57、llowing two kind of structures pattern:</p><p> 1) the double stator structure changes the magnetic resistance DD electric motor;</p><p> 2) the central stator structure changes the magnetic r
58、esistance mixed type DD electric motor. </p><p> 5. special drivers </p><p> 1)piezoelectricity driver. It is well known, has made using the piezoelectricity part electricity or the electrostr
59、iction phenomenon should the variant acceleration instrument and the ultrasonic sensor, the piezoelectricity driver use the site of electrical energy controls several microns to several hundred microns displacements in i
60、s higher than the micron level big strength, therefore the piezoelectricity driver generally uses in the special use miniature robot assembly system.</p><p> 2) ultrasonic wave electric motor. </p>&
61、lt;p> 3) the vacuum electric motor, uses in the vacuum robot which under the ultra pure environment works, for example uses in to transport the semiconductor silicon chip the ultra vacuum robot and so on.</p>
62、<p> 工業機器人及電動驅動系統</p><p> 有許多關于機器人這個術語的定義。采用不同的定義,全世界各地機器人的數量就會發生很大的變化。 在制造工廠中使用的許多單用途機器可能會看起來像機器人。這些機器是硬連線的,不能通過重新編程的方式去完成不同的工作。這種單用途的機器不能滿足人們?nèi)找鎻V泛接受的關于工業機器人的定義。這個定義是由美國機器人協會提出的:</p><p>
63、 機器人是一個可以改變程序的多功能操作器,被設計用來按照預先編制的、能夠完成多種作業的運動程序運送材料、零件、工具或者專用設備。</p><p> 注意在這個定義中包含有“可以改變程序”和“多功能”這兩個詞。正是這兩個詞將真正的機器人與現代制造工廠中使用的單一用途的機器區分開來?!翱梢愿木幊绦颉边@個術語意味著兩件事:機器人根據編寫的程序工作,以及可以通過重新編寫程序來適應不同種類的制造工作的需要。</p&
64、gt;<p> “多功能”這個詞意味著機器人能通過編程和使用不同的末端執行機構,來完成不同的制造工作。圍繞著這兩個關鍵特征所撰寫的定義正在變成為制造業的專業人員所接受的定義。</p><p> 第一個帶有活動關節的手臂于1951年被研制出來,由美國原子能委員會使用。在1954年,第一個可以編程的機器人有喬治.狄弗設計出來。它基于下面兩項重要技術:</p><p> 數字
65、控制(NC)技術。</p><p><b> 遠程操作器技術。</b></p><p> 數字控制技術提供了一種非常適合于機器人的機器控制技術。它可以通過儲存的程序?qū)\動進行控制。這些程序包含機器人進行順序運動的數據,開始運動和停止運動的時間控制信號,以及做出決定所需要的邏輯語句。</p><p> 遠程操作器技術使得一臺機器的性能超出一
66、臺數控機器。它可以使這種機器能夠在不容易進入和不安全的環境中完成各種制造任務。通過融合了上述兩項技術,狄弗研制出第一個機器人,它是一個不復雜的,可以編程的物料運送機器人。</p><p> 第一臺商業化生產的機器人在1959年研制成功。通用汽車公司在1962年安裝了第一臺用于生產線上的工業機器人,它是尤尼梅森公司生產的。在1973年,辛辛那提.米蘭克朗公司研制出T-3工業機器人,在機器人的控制方面取得了較大的進
67、展。T-3機器人是第一臺商業化生產的采用計算機控制的機器人。</p><p> 數字控制技術和遠程操作器技術推動了大范圍的機器人研制和應用。但是主要的技術進步并不僅僅上由于這些新的應用能力而產生的,而是必須由利用這些能力所得到的效益來提供動力。就工業機器人而言,這個動力是經濟性。</p><p> 在20世紀70年代中,工資的快速增長大大增加了制造業的企業中的人工費用。與此同時,來自國
68、外的競爭成為美國制造業所面臨的一個嚴峻的考驗。諸如日本等外國的制造廠家在廣泛地應用了自動化技術之后,其工業產品,特別是汽車,在美國和世界時常中占據了日益增大的分額。</p><p> 通過采用包括機器人在內的各種自動化技術,從70年代開始,日本的制造廠家能夠比沒有采用自動化技術的美國制造廠家生產更好的和更便宜的汽車。隨后,為了生存,美國制造廠家被迫考慮采用任何能夠提高生產率的技術。</p><
69、;p> 為了與國外制造廠家進行競爭,必須以比較低的成本,生產出更好的產品。其他的因素,諸如尋找能夠更好地完成帶有危險性的制造工作的方式也促進了工業機器人的發展。但是,主要的理由一直是,而且現在仍然是提高生產率。</p><p> 機器人的一個主要優點是它們可以在對于人類來說是危險的位置上工作。采用機器人進行焊接和切斷工作上比由人工來完成這些工作更安全的例子。盡管機器人與工作地點的安全密切相關,它們本身也
70、可能是危險的。</p><p> 應該仔細地設計和配置機器人和機器人單元,使它們不會傷害人類和其他機器。應該精確地計算出機器人的工作范圍,并且在這個范圍的四周清楚地標出危險區域??梢圆捎迷诘孛嫔袭嫵黾t顏色的線和設置障礙物以阻止工人進入機器人的工作范圍。</p><p> 即使有了這些預防措施,在使用機器人的場地中設置一個自動停止工作的系統仍然上不失為一個好主意。機器人的這個系統應該具有
71、能夠檢測出是否有需要自動停止工作的要求的能力。為了保證能有一個安全的環境,應當安裝容錯計算機和冗余系統來保證在適當?shù)臅r候停止機器人的工作。</p><p> 機器人電動伺服驅動系統是利用各種電動機產生的力矩和力,直接或間接地驅動機器人本體以獲得機器人的各種運動的執行機構。對工業機器人關節驅動的電動機,要求有最大功率質量比和扭矩慣量比、高起動轉矩、低慣量和較寬廣且平滑的調速范圍。特別是像機器人末端執行器(手爪)
72、應采用體積、質量盡可能小的電動機,尤其是要求快速響應時,伺服電動機必須具有較高的可靠性和穩定性,并且具有較大的短時過載能力。這是伺服電動機在工業機器人中應用的先決條件。機器人對關節驅動電機的主要要求規納如下:1)快速性。電動機從獲得指令信號到完成指令所要求的工作狀態的時間應短。響應指令信號的時間愈短,電伺服系統的靈敏性愈高,快速響應性能愈好,一般是以伺服電動機的機電時間常數的大小來說明伺服電動機快速響應的性能。2)起動轉矩慣量比大
73、。在驅動負載的情況下,要求機器人的伺服電動機的起動轉矩大,轉動慣量小。3)控制特性的連續性和直線性,隨著控制信號的變化,電動機的轉速能連續變化,有時還需轉速與控制信號成正比或近似成正比。4)調速范圍寬。能使用于1:1000~10000的調速范圍。5)體積小、質量小、軸向尺寸短。6)能經受得起苛刻</p><p><b> 1)位置控制方式</b></p><p&
74、gt; 2)速度控制方式;3)轉矩控制方式;4)位置、速度混合方式;5)位置、轉矩混合方式;6)速度、轉矩混合方式;7)轉矩限制;8)位置偏差過大報警;9)速度PID參數設置;10)速度及加速度前饋參數設置;</p><p> 11)零漂補償參數設置;12)加減速時間設置等1.直流伺服電動機驅動器直流伺服電動機驅動器多采用脈寬調制(PWM)伺服驅動器,通過改變脈沖寬度來改變加在電動機電樞
75、兩端的平均電壓,從而改變電動機的轉速。PWM伺服驅動器具有調速范圍寬、低速特性好、響應快、效率高、過載能力強等特點,在工業機器人中常作為直流伺服電動機驅動器。2.同步式交流伺服電動機驅動器 伺服電動機驅動系統相比,同步式交流伺服電動機驅動器具有轉矩轉動慣量比高、無電刷及換向火花等優點,在工業機器人中得到廣泛應用。同步式交流伺服電動機驅動器通常采用電流型脈寬調制(PWM)相逆變器和具有電流環為內環、速度環為外環的多閉環控制系統
溫馨提示
- 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
- 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
- 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
- 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
- 5. 眾賞文庫僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
- 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
- 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。
最新文檔
- 外文翻譯--工業機器人及電動驅動系統
- 外文翻譯--工業機器人及電動驅動系統.doc
- 外文翻譯--工業機器人及電動驅動系統.doc
- 外文翻譯--工業機器人及電動驅動系統.doc
- 外文翻譯--工業機器人及電動驅動系統.doc
- 外文翻譯--工業機器人及電動驅動系統.doc
- 工業機器人外文翻譯
- 工業機器人外文翻譯
- 外文翻譯--工業機器人.doc
- 外文翻譯--工業機器人.doc
- 工業機器人外文資料翻譯
- 外文翻譯--工業機器人.doc
- 外文翻譯--工業機器人.doc
- 外文翻譯----工業機器人的發展
- 工業機器人的發展外文翻譯
- 工業機器人畢業設計外文翻譯
- 工業機器人畢業論文外文翻譯
- 外文翻譯---工業機器人外文翻譯(含word版的)
- 工業機器人交流伺服驅動系統設計.pdf
- 機器人外文翻譯
評論
0/150
提交評論