聯(lián)想--平板電腦可靠性測試標(biāo)準(zhǔn)v1.7(2012.8.24英文版)

1、 Tablet-S HW/Reliability test spec Version V1.7 Document Number MIDH- S- TPD. -xxx Release Date 2012-08-24 Review Cycle 1 year Page 1 of 101 The online version is the master. Tablet-S HW/Reliability Test Spec This docum

2、ent was approved for general use on the indicated date of issue. The user of this document is responsible for obtaining the master/latest version on-line prior to use. The latest version of this document is located at EC

3、M. If this is a printed hardcopy, it’s for reference only. Users that have recommended process changes should send them via e-mail to the process owner. . Document Control Owner and Approver Owner Department Approver

4、Department Gu Jianming PA Liu Yue PA Reviewer Revision Table Version Revision Date Summary of Changes Revised by Department V1.7 2012/8/28 1. Transfer document format; 2. Add tear down item for mechanical design

5、 review; 3. Split op temp/humid cycle test item to operating at high temp, operating at low temp and operating at high temp high humid test; 4. Split non-op temp/humid cycle test item to storage at high temp, storag

6、e at low temp test and storage at high temp high humid test; 5. Add salt fog test 2h spray, 22h storage test condition for unit system check; 6. Add resistance to metal particles test item for speaker mesh check; 7

7、. Add heat with solar radiation test item (optional item) for touch panel and painting check; 8. Define the package environment storage test and test sequence; 9. Add LCD ripple check form the touch panel and back c

8、over; 10. Add display sticking force test item to check touch panel , LCD and front frame 3 in 1 bound process of Gu Jianming Tablet PA Department Name Department Name Tablet-S HW/Reliability test spec Version V1.

9、7 Document Number MIDH- S- TPD. -xxx Release Date 2012-08-24 Review Cycle 1 year Page 3 of 101 The online version is the master. I. Purpose This document is to define HW/Reliability test spec for Tablet product which siz

10、e ≤7”. II. Scope This document is designed to provide detailed instructions for conducting HW/Reliability test, which contains detailed information for each test item’s purpose, units quantity, executing procedure and

11、judge criteria. It can be applied and followed for Lenovo Tablet product, including ODM and In-house project III. Roles Testing team should understand and follow the spec well; Any query on the document, pls contact w

12、ith PA owner for the clarification. IV. Terms & Definitions The terms of maintain of this document is 1year. It is the property of MIDH Corp. and contains confidential and trade secret information. It’s not allowed t