一種自動化夾具設計方法機械加工工藝外文文獻翻譯@中英文翻譯@外文翻譯

1、<p>　　中國地質大學長城學院</p><p>　　本科畢業設計外文資料翻譯</p><p>　　系 別：工程技術系</p><p>　　專 業：機械設計制造及其自動化 </p><p>　　姓 名：楊琦露 </p><p>　　學 號：0521164

2、2 </p><p>　　2015年 4 月 1 日</p><p><b>　　外文資料翻譯譯文</b></p><p>　　一種自動化夾具設計方法</p><p><b>　　塞西爾</b></p><p>　　美國，拉斯克魯塞斯，新墨西哥州立大

3、學，工業工程系，虛擬企業工程實驗室（VEEL）</p><p>　　在這篇論文里，描述了一種新的計算機輔助夾具設計方法。對于一個給定的工件，這種夾具設計方法包含了識別加緊表面和夾緊位置點。通過使用一種定位設計方法去夾緊和支撐工件，并且當機器正在運行的時候，可以根據刀具來正確定位工件。該論文還給出了自動化夾具設計的詳細步驟。幾何推理技術被用來確定可行的夾緊面和位置。要識別所完成工件和定位點就還需要一些輸入量包括CA

4、D模型的技術要求、特征。</p><p>　　關鍵詞：夾緊；夾具設計</p><p><b>　　1.動機和目標</b></p><p>　　夾具設計是連接設計與制造間的一項重要任務。自動化夾具設計和計算機輔助夾具設計開發（夾具CAD）是下一代制造系統成功實現目標的關鍵。在這片論文里，討論了一種夾具設計的方法，這種方法有利于在目前環境下夾具設計

5、的自動化。</p><p>　　夾具設計方法的研究已成為國內多家科研工作的重點。作者：周在[1]中對工件的穩定和總需求約束了雙重標準，突出重點的工作。在夾具設計中廣泛的運用了人工智能（AI）以及專家系統。部分CAD模型幾何信息也被用于夾具設計。Bidanda [4]描述了一個基于規則的專家系統，以確定回轉體零件的定位和夾緊。夾緊機制同時用于執行定位和夾緊功能。其他研究者（如DeVor等，[5,6]）分析了切削力鉆

6、井機械和建筑模型及其他金屬切削加工?？涤袨榈仍赱2]中定義了裝配約束建模的模塊化與夾具元件之間的空間關系。一些研究人員采用模塊化夾具設計原則，用以生成[2,7-11]，另一些夾具設計工作者已經報告了[1,3,9,12-23]?？梢栽赱21,24]中找到夾具設計相關的大量的審查工作。</p><p>　　在第二節中，對夾具設計任務中各種步驟進行了概述。在第3節和第四節中描述了工件的加工過程，要夾緊工件表面，否則將面

7、臨工件的全面自動測定。第5節討論了對工件的夾緊點的測定。</p><p>　　2.夾具設計的整體方法</p><p>　　在本節中，描述了整體夾緊的設計方法。通常對較理想的位置的那一部分進行夾緊，并減低切削力的影響。夾緊的位置和夾具設計中定位的位置是高度相關的。通常，夾緊和定位可以通過同樣的方法來完成。但是，不明白這兩個是夾具設計中不同的方面，可能導致夾具設計的失敗。多數人的在規劃過程中首

8、先解決定位問題，這樣可以使開發的定位與設計的定位相契合。不過，整體定位及設計方法不在本文討論范文內。</p><p>　　除了零件的設計（為此夾具設計有待開發），公差規格，過程序列，定位點和設計等因素外，還應投入CAD模型到夾具設計方法中。這樣的夾具可以夾緊并支撐定位器。指導使用的主要內容應盡量不抵制切割或加工過程和中所涉及的操作。相反，應定位夾具，使切削力在正確的方向，這將有助于保持在一個特定的部分加工操作安全

9、。通過引導對定位器的切割力量，部分（或工件）被固定，固定定位點，因此不能移動的定位器。</p><p>　　在這里討論的夾具的設計方法必須在整體夾具設計方法的范圍內。在此之前進行定位器/支撐和夾具設計的初步階段，涉及到的分析和識別的功能、相關的公差和其他規范是必要的。根據初步的評估和測定，定位/支撐設計與夾具設計結果的在此基礎上可以同時進行。本文對所描述夾具設計的方法討論基于定位器/支撐設計與先前已經確定的假設（

10、包括適當?shù)亩ㄎ缓椭С譁y定一個工件的定位，以及識別和夾具，如V元素的支持面塊，基礎板，定位銷等）。 </p><p>　　2.1 夾具設計的輸入</p><p>　　輸入包括對特定產品的設計翼邊模型，公差信息，提取的特征，過程順序和部分在給定的每一個設計的相關特性的加工方向，面向的位置和定位裝置，以及加工過程中的各種工序，須出示每

11、個相應的功能。</p><p>　　2.2 夾具設計的方法</p><p>　　圖一是自動化夾具設計主要步驟總結圖。對這些步驟概述如下：</p><p>　　第1步：設置配置清單以及相關的[進程_功能]條目。</p><p>　　第2步：確定方向和夾緊力。輸入必要的加工方向向量mdv1，mdv2……mdvn，面對nvs的支持力，并確定法向量。

12、如果加工方向向下（對應的方向向量[0，0，-1]），和面的支持向量平行于加工方向，那么，夾緊力方向平行向下加工方向[0，0，-1]。如果必需要側面夾緊并沒有可夾緊的地方，那么在其中放置一個夾具夾緊下調，然后邊鉗方向計算如下。讓sv和tv輔助常規的向量代替次要的和三級定位孔。然后，使用夾緊機構夾緊一個方向，例如，av應平行于這兩個法向量，即，正常向量應分別與每塊表面的sv和tv向量平行。側面夾緊面應該是一對分別平行于面sv和tv的平面孔。

13、</p><p>　　第三步：從列表中選出最大有效加工力。這樣能夠有效的平衡各加工力。</p><p>　　第四步：利用計算出的最高有效加工力，才能確定用來支撐工件加工的面積的夾具尺寸（例如，一個帶夾子可以作為一個夾緊機構使用）。</p><p>　　第五步：確定給定工件的夾緊面。這一步在第4步中所述過。</p><p>　　第六步：該夾具的

14、夾緊面的實際位置自動在第5節中確定?？紤]接下來的步驟并返回第一步。</p><p>　　圖1 夾具設計方法圖</p><p><b>　　3.判斷夾具尺寸</b></p><p>　　在這項工作中所用到的夾具都來自一個系列。夾具的原理與圖二相同。在這一節里，描述了一個自動化夾具。鎖模力所需的有關螺桿的螺紋裝置大小或保存到位鉗。夾緊力平衡加工工

15、件使工件保持恰當?shù)奈恢?。讓鎖模力為W和螺桿直徑為D。各種螺絲夾緊力大小，可以按以下方式確定：最初，極限拉伸強度（抗拉強度）和該夾具的材料（供應情況而定）可以從數據檢索庫檢索。各種材料有不同的拉伸強度。該夾具材料的選擇，也可直接采用啟發式規則進行。例如，如果部分材料是低碳鋼，那么鉗材料可低碳鋼或機器鋼。為了確定設計應力，抗拉強度值應除以安全系數（如4或5）。根區的螺絲格A1（如一個螺絲鉗）可以被確定：[鎖模力/設計應力]。隨后，螺栓截面全

16、面積可以計算為等于{格A1 /（65％），}（因?yàn)槁萁z的地方可能會發生根切面積約為65％螺栓的總面積） 。螺釘?shù)闹睆紻可以被確定等同于（D2的3.14 / 4）。另一項涉及可用于方程有關的寬度B，高度H和跨度的鉗L的螺絲直徑為D（B，H和L可以為不同的值計算D）：d2=?4/3 BH2/L.</p><p><b>　　圖2 皮帶夾</b></p><p><

17、b>　　4.判斷夾緊表面</b></p><p>　　確定夾具經常出現的相關參數包括了產品的CAD模型，提取的特征信息，特征尺寸，定位面和定位器的選擇?？紤]所有潛在的加緊面，如圖3。最關鍵的是夾緊表面不應重疊或與該面相交，如圖4所示。夾緊面積是與工件表面（或PCF）接觸的是一個二維輪廓線段組成的（見圖6）。利用線段相交測試，可以測定在給定的光子晶體光纖的任何范圍內是否可能有接觸面夾緊面重疊。&l

18、t;/p><p>　　夾緊面的確定可以如下所示：</p><p>　　圖3 潛在的夾緊力和功能介紹</p><p>　　圖4 潛在的夾緊和夾鉗箱輪廓</p><p>　　第1步：鑒別平行于二級和三級定位面（lf1和lf2）是分別到lf1和tcj最遠的距離的面。如下所示：</p><p>　　(a)鑒別面tci,tcj,

19、使面tci和 tcj平行l(wèi)f1和tcj平行l(wèi)f2。</p><p>　　(b)在TCF中列出面對tci的面。</p><p>　　(c)通過檢查所有TCF中面對tci的面，確定的面對tci和tcj的面是到lf1和lf2分別最遠的面，并舍棄所有其他TCF中的面。 </p><p>　　第2步：鑒別平行面的位置，除了不相鄰的附加面。最好是選擇一個不與其他定位

20、面垂直相鄰的面。這一步如下所示：</p><p>　　(a) 考慮TCF列表中的tci面，獲得與每個tci面垂直或相鄰的面然后，在FCF列表中插入每個fci面。</p><p>　　(b) 檢查每個FCI面，并執行以下測試：如果FCI是相鄰、垂直于lf1或lf2，然后從列表中舍棄它并插入NTCF列表中。</p><p>　　第3步:確定加緊面都在有效的加緊面上，如下

21、所述夾緊面：</p><p>　　例1:如果沒有條目在列表NTCF中，就使用TCF中的面并繼續執行步驟4。如果任何面發現，垂直于第二，第三位置的面孔lf1和lf2，這將要面臨的是下次選擇可行的夾具。在這種情況下，唯一剩下的選擇是重新審視在列表NTCF的面。</p><p>　　例2：如果列表中NTCF條目數為1時，可行夾緊面為FCI。與TCI的法向量垂直相鄰的相應軸是夾緊軸。</p&

22、gt;<p>　　例3：如果在列表NTCF項數大于1，確定最大的TCI加緊面再進行步驟4。</p><p>　　例4：:夾緊力的方向可以是[1，0，0]或[0，1，0]，可以夾緊TCI面的中心位置。</p><p>　　在其他幾何位置可確定使用零件幾何形狀和拓?fù)湫畔ⅲ@在下一節中描述。</p><p>　　圖5 測定夾具外形尺寸</p>

23、<p>　　5.判斷夾緊表面上的夾緊點</p><p>　　確定夾緊面后，必須確定實際夾緊位置。輸入夾具側面積，沿著[x，Y，Z]和潛在的夾緊面CF方向。容下使用CF幾何獲得夾具側面積：</p><p>　　第一步是確定一個箱體的大小，這是用來測試它是否包含在它里面的任何部分。相交測試也可以在前面介紹的方法使用。如果相交測試返回一個負的結果，那么有部分箱體與夾具相交，如圖4所示

24、。如果相交測試返回一個正的結果，可以執行下列步驟：</p><p>　　1.劃分成更小的矩形大小條（1 W）夾框輪廓(圖5和圖6)。</p><p>　　2.執行指定與功能配置文件出現在CF面的零件設計的相交測試。</p><p>　　3.沒有功能相交的條形區域，都是可行夾緊區域。如果有一個以上的長方形候選面，矩 形配置文件，向中沿軸夾緊CF面點的是夾緊配

25、置文件（夾點）。</p><p>　　如果沒有發現配置文件，夾具寬度可減少一半，夾具數可以增加兩個。使用這些修改過的夾具尺寸，執行前面描述的特征相交測試。如果此測試也失敗了，那么可以用相鄰的面作為夾緊面用于執行端夾緊。這面可以重復進行PCF和功能相交測試。</p><p>　　圖6 配置文件夾的功能和區域的相交測試 </p><p>　　5.1 試驗曲線的交點&l

26、t;/p><p>　　輸入需要的二維輪廓P1、P2，使用下列方法可以自動確定該配置文件的交集。每一個輸入的資料組成一個封閉環。此配置文件測試的步驟如下：</p><p>　　(T1) 考慮P1線段中的L（i，1）和P2線段中的L（2，j）。</p><p>　　(T2) 采用L（i，1）線段和L（2，j）線段的相交段。如果邊緣相交測試返回一個正值，那么特征面和潛在面相交

27、。如果它返回一個負值，繼續執行步驟3。</p><p>　?。═3）重復與步驟（T1）相同的部分或者緩慢走過其余P1中的(Li,1)段直到P2中的[(L2,j+1) till j=n-1]段。</p><p>　　(T4) 其余部分邊和P1中的L12、L13……L1n段重復（T1）和（T2）步驟。</p><p>　　如果特征面與夾緊面重復，線相交測試將決定該事件。

28、相交的邊可以進行自動檢測兩個面是否相互交叉。輸入所需的邊L12{連接 (x1, y1) 和 (x2, y2)}和L34{連接 (x3, y3) 和(x4, y4)}。</p><p>　　L12型方程的可表示為：</p><p>　　F(x,y) =?0 (1)</p><p>　　L34型方程的可表示為：</p>

29、<p>　　H(x,y) =?0 (2)</p><p>　　第一步：使用等式（1）計算R3 F(x3, y3)，用X和Y取代X3和Y3;計算R4 F(x4, y4)，用X和Y取代X4和Y4。</p><p>　　第二步：如果R3和R4都與0不相等，但R3與R4結果相同（R1與R2在相同的一邊），則邊L12與L34不相交。如果這

30、樣不滿足條件，那么進行第三步。</p><p>　　第三步：使用等式（2）計算R1 ??H(x1, y1)。接著，計算R2 ??G(x2, y2)再進行第四步。</p><p>　　第四步：如果R1與R2都不等于0，且R1與R2的結果相同，那么把R1與R2放在相同的一邊并輸入不相交。如果，這個也不滿足條件，那么進行第五步。</p><p>　　圖7 示例夾具設計其

31、中一部分方法</p><p>　　第五步：給定相交線段。這樣就完成了測試?？紤]如圖7所示的一部分樣品。將要生產一個盲孔。起初，完成定位設計。定位器的（或主要定位器）是一個基盤（放在F4面）和二級和三級定位器面臨F6和F5（對應到定位面lf1和lf2在第4節中討論）。一個輔助定位器也被使用，這是一個V型塊（對F3和F5面輔助定位），如圖8所示。在前面討論的夾具設計方法中所述的步驟的基礎上，候選面孔（這是平行的，并在

32、從lf1和lf2最遙遠的距離）是面對F3和F5面。沒有面孔，這是平行到定位面，但他們不相鄰。在這種情況下使用的優先權規則（如步驟3第4步討論），剩余的候選面面對的是F2面。夾具方向向下的V型塊徑向定位器和其他與對工件夾緊底面提供所需位置。</p><p>　　圖8 關于圖7夾具設計的一部分樣品</p><p>　　根據第五步選擇夾具的位置。如果沒有功能發生在面F2上，那么也沒有必要進行相

33、交測試確定夾具優美加緊。夾具位置應遠離V型定位器（這是輔助定位位置）的夾緊面毗鄰輔助定位面（這確保了更好的快速夾緊）。最終位置和夾具的設計如圖8所示。</p><p>　　本文討論的方法，毫不遜色于其他夾具設計文獻中討論的方法。本文所討論的方法的獨特性是零件的夾緊面的幾何形狀，拓?fù)浜凸δ馨l(fā)生了被加工為基礎的系統鑒定。其他方法都沒有利用了定位器的位置，該方法使用定位器在對持有一級，二級和三級定位器加工的工件。這種方

34、法的另一個好處是在可行的候選面上確定在面上用夾具面交點測試（如前所述），并迅速和有效地確定潛在的下游過程中可能出現問題，夾緊和加工的功能檢測。</p><p><b>　　6.總結</b></p><p>　　在這篇論文中，對在一個夾具設計方法的總體框架內進行了夾具設計方面的討論。</p><p>　　設計定位器，規范零件設計，和其他相關被用來

35、確定夾緊面和夾緊方向。并討論了各種自動化步驟。</p><p><b>　　外文原文</b></p><p>　　A Clamping Design Approach for Automated Fixture Design</p><p><b>　　J. Cecil</b></p><p>　　

36、Virtual Enterprise Engineering Lab (VEEL), Industrial Engineering Department, New Mexico State University, Las Cruces, U</p><p>　　In this paper, an innovative clamping design approach is described in the con

37、text of computer-aided fixture design activi-ties. The clamping design approach involves identification of clamping surfaces and clamp points on a given workpiece. This approach can be applied in conjunction with a locat

38、or design approach to hold and support the workpiece during machining and to position the workpiece correctly with respect to the cutting tool. Detailed steps are given for automated clamp design. Geomet</p><p

39、>　　Keywords: Clamping; Fixture de</p><p>　　1.Motivation and Objectives</p><p>　　Fixture design is an important task, which is an integration link between design and manufacturing activities.

40、The automation of fixture design activities and the development of computer-aided fixture design (CAFD) methodologies are key objectives to be addressed for the successful realisation of next generation manufacturing sys

41、tems. In this paper, a clamp design approach is discussed, which facilitates automation in the context of an integrated fixture design methodology</p><p>　　.Clamp design approaches have been the focus of sev

42、eral research efforts. The work of Chou [1] focused on the twin criteria of workpiece stability and total restraint requirement. The use of artificial intelligence (AI) approaches as well as expert system applications in

43、 fixture design has been widely reported [2,3]. Part geometry information from a CAD model has also been used to drive the fixture design task. Bidanda [4] described a rule-based expert system to identify the locating an

44、d clampin</p><p>　　In Section 2, the various steps in the overall approach to automate the clamping design task are outlined. Section 3 describes the determination of the clamp size to hold a work-piece duri

45、ng machining and in Section 4, the automatic determi-nation of the clamping surface or face region on a workpiece is detailed. Section 5 discusses the determination of the clamp-ing points on a workpiece. </p><

46、;p>　　2. Overall Approach to Clamp Design</p><p>　　In this section, the overall clamping design approach is described. Clamping is usually carried out to hold the part in a desired position and to resist t

47、he effects of cutting forces. Clamping and locating problems in fixture design are highly related. Often, the clamping and locating can be accomplished by the same mechanism. However, failure to understand that these two

48、 tasks are separate aspects of fixture design may lead to infeasible fixture designs. Human process planners generally resolve</p><p>　　CAD models of the part design (for which the clamp design has to be dev

49、eloped), the tolerance specifications, process sequence, locator points and design, among other factors, are the inputs to the clamp design approach. The purpose of clamping is to hold the parts against locators and supp

50、orts. The guiding theme used is to try not to resist the cutting or machining forces involved during a machining operation. Rather, the clamps should be positioned such that the cutting forces are in the direc</p>

51、<p>　　The clamp design approach discussed here must be viewed in the context of the overall fixture design approach. Prior to performing locator/support and clamp design, a prelimi-nary phase involving analysis and

52、 identification of features, associated tolerances and other specifications is necessary. Based on the outcome of this preliminary evaluation and determination, the locator/support design and clamp design can be carried

53、out. The clamp design approach described in this paper is discussed base</p><p>　　2.1Inputs to Clamp Design</p><p>　　The inputs include the winged-edge model of the given product design, the tol

54、erance information, the extracted features, the process sequence and the machining directions for each of the associated features in the given part design, the location faces and locator devices, and the machining forces

55、 for the various processes required to produce each corresponding feature.</p><p>　　2.2Clamp Design Strategy</p><p>　　The main steps in the automation of the clamping design task are summarised

56、in Fig. 1. An overview of these steps is as follows:</p><p>　　Step 1. Consider the set-up SUi in the set-up configuration list along with the associated [process feature] entries.</p><p>　　Step

57、2. Identify the direction and type of clamping. The inputs required are the machining direction vectors mdv1,mdv2,. . .,mdvn and identified normal vectors of support face nvs. If the machining directions are downward (wh

58、ich correspond to the direction vector [0, 0, ?1]), and the normal vector of the support face is parallel to the machining direction, then the direction of clamping is parallel to the downward machining direction [0, 0,

59、?1]. If sideways clamping is required, and if there are</p><p>　　Step 3. Determine the highest machining force from the mach-ining forces list (for each feature) MFi (i1, . . .,n). This will be the effective

60、 force FE that must be balanced while designing the clamp for this set-up SUi.</p><p>　　Step 4. Using the value of the calculated highest machining force FE, the dimensions of the clamp to be used to hold th

61、e workpiece can be determined (for example, a strap clamp can be used as a clamping mechanism). The approach for this task is explained in Section 3.</p><p>　　Step 5. Determine the clamping face on a given w

62、orkpiece. This step can be automated as described in Section 4.</p><p>　　Step 6. The actual position of the clamp on the clamping face is determined in an automated manner as explained in Section 5.</p>

63、;<p>　　Consider next set-up SU(i 1) and proceed to step 1.</p><p>　　Fig. 1. The clamp design activities.</p><p>　　3. Determination of the Clamp Size</p><p>　　In this work, th

64、e clamps used belong to the family of clamps referred to as strap clamps. A strap clamp is based on the same principle as that of the lever (see Fig. 2). In this section, the automated design of a strap clamp is describe

65、d. The clamping force required is related to the size of the screw or a threaded device that holds the clamp in place. The clamping force should balance the machining force to hold the workpiece in position. Let the clam

66、ping force be W and the screw diameter be d.</p><p>　　Fig. 2. The strap clamp </p><p>　　4.The Determination of the Clamping Face</p><p>　　The required inputs to determine the clampi

67、ng region include the CAD model of the product, the extracted features infor-mation, the feature dimensions and faces on which they occur, the locating faces and locators selected. Consider a potential clamping face PCF

68、as shown in Fig. 3. The crucial criterion to be satisfied is that the clamping surface should not overlap or intersect with the features on that face, as shown in Fig. 4. The clamping surface area, which is in contact wi

69、th the workpiece </p><p>　　The determination of clamping faces can be automated as fol-lows:</p><p>　　Fig. 3. Potential clamping face and feature profiles.</p><p>　　Fig. 4. Potentia

70、l clamping face and clamp box profile. </p><p>　　Step 1. Identify faces that are parallel to the secondary and tertiary locator faces (lf1 and lf2) and at the farthest distance from lf1 and tcj, respectivel

71、y. This is performed as shown below:</p><p>　　(a) Identify faces tci, tcj such that tci is parallel to lf1 and tcj is parallel to lf2.</p><p>　　(b) Insert candidate faces tci in list TCF.<

72、;/p><p>　　(c) By examining all faces tci listed in TCF, determine faces tci and tcj that are farthest from face lf1 and lf2, respect-ively, and discard all other faces from list TCF.</p>&l

73、t;p>　　Step 2. Identify the face that is parallel to the location faces but not adjacent to the additional locator faces. It is preferable to select a clamp face that does not have to share the adjacent perpendicular f

74、ace with a locator. This step can be automated as shown below:</p><p>　　(a) Consider each face tci in list TCF and obtain corresponding faces fci that are adjacent and perpendicular to each tci. Then, inse

75、rt each face fci in list FCF.</p><p>　　(b) Examine each fci and perform the following test:If fci is adjacent, perpendicular to lf1 or lf2,then discard it from list FCF and insert it in list NTCF.</p>

76、;<p>　　Step 3. Determine the clamping faces, based on the availability of potential clamping faces, as described below.</p><p>　　Case (a). If there are no entries in list NTCF, then use the faces in l

77、ist TCF and proceed to step 4. If any faces were found that were perpendicular to the secondary and tertiary location faces lf1 and lf2, such faces are the next feasible choices to be used for clamping.</p><p&

78、gt;　　In this case, the only remaining choice is to re-examine the faces in list NTCF.</p><p>　　Case (b). If the number of entries in list NTCF is 1, the feasible clamping face is fci. The normal vector of th

79、e corresponding adjacent, perpendicular face tci is the axis of clamping.</p><p>　　Case (c). If number of entries in list NTCF is greater than 1, determine the face tci with larger area and proceed to step 4

80、.</p><p>　　Step 4. Depending on the direction of clamping which is either [(? or ?)1, 0, 0] or [(? or ?) 0, 1, 0], the clamp can be positioned along the centre of the face tci. The candidate geometrical posi

81、tions of the clamp can be determined using part geometry and topological information, which is described in the next section.</p><p>　　Fig. 5. Determination of the clamp profile dime</p><p>　　5.

82、 Determination of the Clamping Points on a Clamping Face</p><p>　　After the clamp face has been determined, the actual clamping positions on that face must be determined. The inputs are the clamp profile dim

83、ensions, clamp directions [x, y, z], and poten-tial clamping face CF. The clamp profile dimensions are obtained (as in case (g)) using CF geometry as follows.</p><p>　　The first step is to determine a box si

84、ze, which is tested to determine whether it contains any features inside it. Profile intersection tests can also be performed using the method described earlier. If the intersection test returns a negative result, then n

85、o feature intersects with the clamp box profile, as shown in Fig. 4. If the intersection test returns a positive result, the following steps can be performed:</p><p>　　1.Divide the clamp box profile into sma

86、ller rectangular strips of size (1 ? w) (Figs 5 and 6).</p><p>　　2.Perform the intersection tests with the feature profiles of features that occur on the face CF for the given part design.</p><p&g

87、t;　　Fig. 6. Profiles intersection test of feature and clamp regions.</p><p>　　3.The rectangular strips, where no feature intersection occurs, are feasible clamping regions. If there is more than one candidat

88、e rectangle for clamping, the rectangle profile that is toward the mid-point of the CF face along the clamping axis is the clamp profile (and clamp points).</p><p>　　If no profile Pi can be found that does n

89、ot intersect with the feature profiles, clamp width can be reduced by half and the number of clamps increased to two on that face. Using these modified clamp dimensions, perform the feature intersection test described ea

90、rlier. If this test also fails, then the side face adjacent to the PCF can be used as the clamping surface to perform side clamping. The side face then becomes the PCF and the feature intersection test can be repeated.&l

91、t;/p><p>　　5.1 The Intersection of Profiles Test</p><p>　　The required inputs include the 2D profile P1 another 2D profile P2. The intersection of profiles can be determined in an automated manner

92、 using the following approach. Each input profile Pi consists of a closed loop of line segments Lij. The steps in this profile test are as follows:</p><p>　　(T1) Consider a line segment L(i,1) in P1 and anot

93、her line segment L(2, j) in P2.</p><p>　　(T2) For inputs L(i,1) and L(2, j), the intersection of edges can be employed. If the edge intersection test returns a positive value, then the feature profile inters

94、ects with the candidate or potential clamp profile under evaluation. If it returns a negative value, proceed to step 3.</p><p>　　(T3) Repeat step (T1) for the same segment or edge (Li,1) in P1 with all remai

95、ning segments [(L2, j?1) till j ? n–1] in P2. (T4) Repeat steps (T1) and (T2) for the remaining edges or segments L12, L13,. . .,L1n in profile P1.</p><p>　　If the feature profiles overlap the clamping profi

96、les, the line intersection tests will determine that occurrence. The inter-section of edges test can be performed automatically to detect whether two edges intersect with each other. The inputs required for this test are

97、 the line segments L12 {connecting(x1, y1) and (x2, y2)} and L34 {connecting (x3, y3) and (x4, y4)}.</p><p>　　Let the equation of L12 be represented by:</p><p>　　F(x,y) =0

98、 (1)</p><p>　　and that of L34 by:</p><p>　　H(x,y)= 0 (2)</p><p>　　Step 1.Using Eq. (1) compute r3 ? F(x3, y3) by substitut

99、ing x3 and y3 for x and y and compute r4 ? F(x4, y4) by substitut-ing x4 and y4 for x and y.</p><p>　　Step 2. If r3 is not equal to 0, r4 is not equal to 0, and the signs of r3 and r4 are the same, (which in

100、dicate r1 and r2 lie on same side), then the edges L12 and L34 do not intersect. If this is not satisfied, then step (3) is performed.</p><p>　　Step 3. Using Eq. (2), compute r1 ? H(x1, y1). Then, compute r2

101、 ? G(x2, y2) and proceed to step 4.</p><p>　　Step 4. If r1 is not equal to zero, r2 is not equal to zero, and the signs of both r1 and r2 are the same }, then r1, r2 lie on the same side and the input line s

102、egments do not intersect. Else, if this condition is not satisfied, proceed to step 5.</p><p>　　Fig. 7. Sample part to illustrate the clamping design approach.</p><p>　　Step 5. The given line se