版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領
文檔簡介
1、英文資料及中文翻譯Mobile CommunicationCellular Telephone SystemsA cellular telephone system provides a wireless connection to the PSTN for any user location within the radio range of the system. Cellular systems accommodate a lar
2、ge number of users over a large geographic area, within a limited frequency spectrum .Cellular radio systems provide high quality service that is often comparable to that of the landline telephone systems .High capacity
3、is achieved by limiting the coverage of each base station transmitter to a small geographic area called a cell so that the same radio channels may be reused by another base station located some distance away. A sophistic
4、ated switching technique called a handoff enables a handoff enables a call to proceed uninterrupted when the user moves from one cell to another.A basic cellular system consists of mobile stations, base stations and a mo
5、bile switching center (MSC). The Mobile Switching Center is sometimes called a mobile telephone switching office (MTSO),since it is responsible for connecting all mobiles to the PSTN in a cellular system. Each mobile com
6、municates via radio with one of the base stations and may beheaded-off to any number of base stations throughout the duration of a call .The mobile station contains a transceiver, an antenna, and control circuitry ,and m
7、ay be mounted in a cuticle or used as a portable hand-held unit .The base stations of several transmitters and receivers which simultaneously handle full duplex communications and generally have towers which support seve
8、ral transmitting and receiving antennas. The base station serves as a bridge between all mobile users in the cell and connects the simultaneous mobile calls vis telephone lines or microwave links to the MSC. The MSC coor
9、dinates of all of the base stations and connects the entire cellular system to the PSTN.A typical MSC handles 100000 cellular subscribers and 5000 simultaneous conversations at a time, and accommodates all billing and sy
10、stem maintenance functions, as well .In large cities, several MSCs are used by a single carrier.Cordless Telephone SystemsCordless telephone systems are full duplex communication systems that use radio to connect a porta
11、ble handset to a dedicated base station ,which is then connected to a dedicated telephone line with a specific telephone number on the pubic switched individually involves far more equipment because separate filters , mo
12、dulators and oscillators are required for every channel rather than for each group .However the failure of one module will lose all of the channels associated with a group.Time Division Multiplexing It is possible, with
13、pulse modulation systems, to use the between samples to transmit signals from other circuits .The technique is known as time division multiplexing (TDM).To do this it is necessary to employ synchronized switches at each
14、end of the communication link to enable samples to be transmitted in turn ,from each of several circuits .Thus several subscribers appear to use the link simultaneously . Although each user only has periodic short time s
15、lots, the original analog signals between samples can be reconstituted at the receiver.Pulse Code Modulation In analog modulation, the signal was used to modulate the amplitude or frequency of a carrier , directly .Howev
16、er in digital modulation a stream of pulses ,representing the original ,is created .This stream is then used to modulate a carrier or alternatively is transmitted directly over a cable .Pulse Code Modulation (PCM)is one
17、of the two techniques commonly used.All pulse systems depend on the analog waveform being sampled at regular intervals. The signal created by sampling our analog speech input is known as pulse amplitude modulations .It
18、 is not very useful in practice but is used as an intermediate stage towards forming a PCM signal .It will be seen later that most of the advantages of digital modulation come from the transmitted pulses having two level
19、s only ,this being known as a binary system .In PCM the height of each sample is converted into a binary number .There are three steps in the process of PCM: sampling, quartering and coding .Optical Fiber Communications
20、Communication may be broadly defined as the transfer of information from one point to another .When the information is to be conveyed over any distance a communication system is usually required .Within a communication s
21、ystem the information transfer is frequently achieved by superimposing or modulating the information on to an electromagnetic wave which acts as a carrier for the information signal .This modulated carrier is then transm
溫馨提示
- 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
- 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
- 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
- 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
- 5. 眾賞文庫僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
- 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
- 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。
最新文檔
- 外文翻譯--移動通信
- 現代移動通信外文翻譯
- gps通信系統外文翻譯---全球移動通信系統
- 移動通信相關畢業設計外文翻譯
- 外文翻譯---通用移動通信系統的回顧
- 通信類外文文獻翻譯-gsm移動通信系統綜述
- 通信工程外文翻譯--移動通信3g技術分析
- 通信工程畢業設計外文翻譯--通用移動通信系統的回顧
- 外文翻譯--lte升級版移動通信系統的載波聚合技術
- 外文翻譯--lte升級版移動通信系統的載波聚合技術
- 外文翻譯--lte升級版移動通信系統的載波聚合技術
- 外文翻譯--通信系統簡介
- 外文翻譯--通信系統簡介
- 數字通信外文翻譯
- 數字通信外文翻譯
- 外文翻譯----無線紅外通信
- 外文翻譯---移動清潔換熱器
- 無線通信外文翻譯
- 通信工程外文翻譯
- 移動媒體api外文翻譯
評論
0/150
提交評論