外文翻譯--針對真空樹脂灌注機鏡頭設備建立在自動診斷系統上的模糊數學_第1頁
已閱讀1頁,還剩21頁未讀, 繼續免費閱讀

下載本文檔

版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領

文檔簡介

1、<p>  A Fuzzy Mathematics Based Fault Auto-diagnosis System for Vacuum Resin Shot Dosing Equipment</p><p>  HE Zheng-wen , XU yu , WU Jun</p><p>  School of Management, Xi’an Jiaoton

2、g univervsity, Xi’an 710049, P.R. China</p><p>  Abstract: On the basic of the analysis of faults and their causes of vacuum resin shot dosing equipment, the fuzzy model of fault diagnosis for the equipment

3、is constructed, and the fuzzy relationship matrix, the symptom fuzzy vector, the fuzzy compound arithmetic operator, and the diagnosis principle of the model are determined. Then the fault auto-diagnosis system for the e

4、quipment is designed, and the functions for real-time monitoring its operation condition and for fault auto-diagnosis are </p><p>  Key words: fuzzy model, fault auto-diagnosis system, vacuum resin shot dosi

5、ng equipment</p><p>  1 Introduction</p><p>  Vacuum Resin Shot Dosing Equipment (VRSDE) is a key special equipment used to perfuse various kinds of electrical components, such as striking windi

6、ngs of vehicles and motorcycles, transformers, sensors, capacitors and so on (hereafter referred to as “workpieces” ) with epoxy resin. Its function is to purify and to mix epoxy resin (liquid A) with solidifying catalys

7、t (liquid B) under a vacuum condition firstly, and then to perfuse them into workpieces in accurate proportion and quantum, thus fin</p><p>  Similar to most complicated equipment, the fault information envi

8、ronment of VRSDE is a fuzzy one, basically. Beginning with analyzing the relationship of faults and their causes, we construct the mathematical model of faults and their causes, we construct the mathematical model of fau

9、lt diagnosis for the VRSDE based on fuzzy theory. On the basis of this model we build a fault auto-diagnosis system for the equipment that fulfills the functions of real-time monitoring on the operation condition an</

10、p><p>  2 The main faults and their causes</p><p>  According to the impacts on the quality and the process of perfusion, the main faults of the VRSDE can be classified as the following kinds: prop

11、ortion fluctuation, insufficient mixture, inadequate purification, leaking from shot mouth, quantum fluctuation, quantum reduction and no liquid shooting out from shot mouth. Our research on the formation mechanism of fa

12、ults shows that these faults have relations on the following reasons to different extents: uni-direction valve being in malfunction sta</p><p>  Table 1 The correlative degree of main faults and their causes

13、 of VRSDE</p><p>  Note: The number of “○ “ indicates the correlative degree of causes and faults.</p><p>  3 construction of fuzzy model for fault diagnosis</p><p>  We define tha

14、t the operation condition set of the VRSDE consists of all kinds of faults and is expressed by V: </p><p>  V1 Proportion fluctuation </p><p>  V2 Insufficient mixture</p>

15、<p>  V3 Inadequate purification</p><p>  V = V4 = Leakage from shot mouth</p><p>  V5 Quantum fluctuation </p><p>  V6 Quantum reduction<

16、/p><p>  V7 No liquid shooting out from shot mouth </p><p>  The symptom set of VRSED is composed of all reasons of faults and defined as U</p><p>  U1 Uni-direction val

17、ve being in malfunction state</p><p>  U2 Shutting-valve being in malfunction state</p><p>  U3 The pipe out of the perfusion chamber seeping </p><p>  U4 T

18、he pipe within the perfusion chamber seeping </p><p>  U5 Liquid level in purifying canister being too low</p><p>  U6 Vacuum degree of purifying canister being too low</p>

19、<p>  U = u7 = Liquid temperature fluctuation</p><p>  U8 Moving down speed of the cylinder being too low</p><p>  U9 Air pressure being too low</p><p> 

20、 U10 Measuring pump wearing and tearing seriously</p><p>  U11 Machining precision of measuring system being too low</p><p>  U12 proportion being too big or too small</p>

21、;<p>  U13 Resin containing arenaceous quartz</p><p>  The fuzzy relationship matrix of operating condition set V and symptom set U is defined as R:</p><p>  r11 r12 ......

22、 r17</p><p>  R = r21 r22 ...... r27</p><p>  .... ... ... ...</p><p>  r13.1 r13.2 … r13.4</p><p>  where rij=uji, 0≦rij≦1, 1≦i≦13 , 1

23、≦j≦7 , rij denotes the correlative degree of operating condition j and symptom i of the VRSDE.</p><p>  Through dealing with the data gathered by sensors , we can obtain symptom fuzzy vector A:A=a1/u1+a2/u2+

24、...+a13/u13=(a1,a2,...,a13) 0≦ai≦1 i=1,2,...,13 Vector A is the subset of symptom set U and its element ai represents the membership of ui to vector a. Element ai indicates the effect degree of symptom ui on the total

25、symptom of the equipment, or in a common term, signifies whether cause i is serious or not to a certain extent.</p><p>  After symptom fuzzy vector A and fuzzy relationship matrix r are obtained, condition f

26、uzzy vector B can be calculated using the following formula:</p><p><b>  B= A . R</b></p><p>  Where “.” Represent fuzzy compound arithmetic operation. Vector B is the subset of symp

27、tom set V and can be written as follows:</p><p>  B=b1/v1+b2/v2+...+b7/v7=(b1,b2,....b7)</p><p>  Where 0 <=bj<=1, j=1,2,....,7. Element bj denotes the membership of vj to vector B and ind

28、icates the serious degree of fault j.</p><p>  After getting condition fuzzy vector B, we can identify the operation state of the VRSDE and diagnose its faults according to the value of element b, and the fa

29、ult diagnosis principle.</p><p>  The course above can be illustrated by Figure1.</p><p>  Figure 1 Fault diagnosis flow chart</p><p>  3.1 Determination of fuzzy relationship matri

30、x R</p><p>  In our research, we adopt an integrated technique combining several methods such as expert experience method, statistical method of experiments, twice two-element comparison method together to d

31、etermine elements’ values of the fuzzy relationship matrix. On the basic of the experiences accumulated through innumerable experiments, the value of every element is given primarily by using the twice two-element compar

32、ison method. Then we verify and adjust these values continuously until they coincide w</p><p>  0.98 0.00 0.00 0.85 0.00 0.00</p><p>  0.00 0.00 0.95 0.98 0.84 0.63</p><p>

33、;  0.32 0.98 0.71 0.82 0.18 0.00</p><p>  0.00 0.00 0.89 0.80 0.37 0.00</p><p>  0.42 0.96 0.68 0.92 0.95 0.00 </p><p>  0.45 0.35 0.97 0.67 0.68 0.20 0.00<

34、/p><p>  R= 0.34 0.47 0.31 0.32 0.55 0.00 0.00 </p><p>  0.92 0.00 0.00 0.00 0.00 0.00</p><p>  0.91 0.00 0.00 0.00 0.00 0.82 </p><p>  0.30 0.00

35、 0.00 0.90 0.15 0.00</p><p>  0.00 0.00 0.00 0.90 0.00 0.00</p><p>  0.71 0.00 0.00 0.00 0.00 0.00</p><p>  0.52 0.23 0.00 0.21 0.31 0.45</p><p>  3.2

36、 Determination of symptom fuzzy vector A</p><p>  Element a (i =1, 2 ...., 13 ) of symptom fuzzy vector A can be determined by dealing with the data gathered by sensors. For the elements whose definition fie

37、lds are a real number field, we may select their membership functions according to their characteristics and the traits of the fuzzy set. The membership functions of these elements are shown in Table 2. For other element

38、s, we can determine their membership values according to the rules listed in Table 3. </p><p>  Determination of fuzzy compound arithmetic operator</p><p>  The results of the causes on the faul

39、ts are very complex. For a certain kind of fault, its causes not only can be divided into primary ones and secondary ones but also can exert an integrated influence on the fault as well. Furthermore, there still exists a

40、 strong correlation among various causes. For the facts above, we adopt a fuzzy compound arithmetic operator of “giving prominence to the main symptom” as the fuzzy compound calculation, thus not only attaching an import

41、ance to the decisive ef</p><p>  bj=V( ai*rij) j=1,2,.....,7</p><p>  Table 2 The membership functions of symptom fuzzy vector A’s elements whose definition fields are real number field

42、</p><p>  Table3 Membership determination rules of symptom fuzzy vector A’s elements whose definition fields are not real number field</p><p>  Determination of fault diagnosis principle </p

43、><p>  In order to identify the operation conditions of the VRSDE accurately and to offer sufficient information related to the faults, we define two threshold valves, λ1 andλ2 (λ1<λ2), and classify its oper

44、ation states as the following three kinds: Normal state , pre-warning state and malfunction state. The principle of fault fuzzy diagnosis can be described as follows:</p><p>  When max (bj) ≦λ1 ,VRSDE is in

45、pre-warning state;</p><p>  Whenλ1<max(bj) ≦λ2 ,VRSDE is in pre-warning state;</p><p>  When max (bj)> λ2,VRSDE is in malfunction state.</p><p>  When the equipment is in a pr

46、e-warning or malfunction state ,the signals of pre-warning or warning are sent out to warn the operators and the fault kinds and their relative information are provided by the system at the same time. The valve ofλ1 and

47、λ2 can determination by iterative experiments and are given ultimately as follows:</p><p>  λ1=0.50, λ2=0.80</p><p>  Fault auto-diagnosis experiments</p><p>  After

48、constructing the mathematical model of fault diagnosis, we establish the fault auto-diagnosis system for the VRSDE by utilizing hardware such as sensors, data gathering circuits, computer, warning circuits and correspond

49、ing software, thus realizing the function of monitoring on the equipment’s operation condition, fault diagnosis, giving alarms, showing the relative information, etc.</p><p>  The mathematical model of the f

50、ault auto-diagnosis system for the VRSDE is constructed on the basis of experiences accumulates by a great number of experiments, so we have to carry out experiments to verify its correctness. The method of the experimen

51、ts can be described as follows: during the practical operation of the equipment, if the system gives an alarm and indicates that there is a certain fault, we may carry out a special test to check whether the fault exists

52、 or not, thus the veracity of</p><p>  During half a year from May 2000 to November 2000, we carried out a series of experiments of fault diagnosis with a VCD-M3 VRSDE in Northwestern Forest Machine Limited

53、Company and obtained the data shown in Table 4.From these data, we can see that the correct percentage of that diagnosis has reached 93.3% and the design requirements of the system have been met, basically. Then the corr

54、ectness of the mathematical model of fault diagnosis can be validated indirectly by this result too. Within the </p><p>  Table 4 The data of fault auto-diagnosis experiments</p><p>  5 Conclu

55、sion </p><p>  The fault auto-diagnosis model for the VRSDE is constructed based on fuzzy mathematics, and the function of real-time monitoring on operation condition and auto-diagnosis faults of the equipme

56、nt are realized by using the fault auto-diagnosis system for the VRSDE which is formed on the basis of the mathematical model. The application effects of the system show that the system attains the design purposed and me

57、ets customers’ expectations satisfactorily. The mathematical model of fault diagnosis is</p><p>  References</p><p>  1.A.H. Zhang, Technologies of monitoring on operation condition and fault di

58、agnosis for mechatronic equipment. Northwestern Poly technical University Press, 1995 (In Chinese)</p><p>  2. Z.W. He, Primary research on the fault auto-diagnosis system for VRSDE: (Mastership Dissertation

59、). Xi’an University of Technology, 2001(In Chinese)</p><p>  3. A.P. Chen and C.C. Lin, Fuzzy approaches for fault diagnosis of trans formers. Fuzzy Sets and Systems, Vol.118, pp.139-151, 2001</p><

60、;p>  Brief Biographies </p><p>  HE Zheng-wen is now a Ph. D candidate in the school of Management of Xi’an Jiaotong University, his research interests include industry engineering and ERP.</p><

61、;p>  XU Yu is now a professor in the School of Management of Xi’an Jiaotong University, her research interests include integrated management and optimization of enterprises, and optimal collocation of science and tech

62、nology resources.</p><p>  WU Jun is now a Ph. D candidate in the School of Management of Xi’an Jiantong University, his research interests include integrated management optimization of enterprises, and fina

63、ncial engineering.</p><p>  針對真空樹脂灌注機鏡頭設備建立在自動診斷系統上的模糊數學</p><p>  何政文 許鈺 吳俊</p><p>  西安交通大學管理學院,中國西安710049</p><p>  摘要:在分析真空樹脂鏡頭藥設備的基礎之上,模糊數學模型已經建立起來,并且模糊關系矩陣,癥狀

64、模糊向量,模糊復合運算操作,模型的診斷原則已經確定。接著,設備的錯誤自動診斷系統也被設計完成,實時監控狀態的功能和故障自動診斷可以得以實現。最后,故障自動診斷在實際生產下完成實驗并且系統的真實性得到驗證。</p><p>  關鍵詞:模糊模型,故障自動檢測系統,真空樹脂灌注機設備</p><p><b>  1引言</b></p><p>  

65、真空樹脂灌注機設備(VRSDE)特別主要是用于各種電器元件的灌注,比如汽車、摩托車的打繞組,變壓器,傳感器,電容器等配有環氧樹脂的器件(一下簡稱“工件”)。它的作用首先是凈化和把環氧樹脂(液態甲)和固態催化劑(液態乙)在真空下合成,接著把他們按照精確的比例和量注射到工件中,這樣就完成了環形樹脂的注射。</p><p>  基本上,和大多數復雜的設備一樣,VRSDE的錯誤信息環境是模糊的。從分析錯誤和他們起因的關系

66、開始,我們可以建立錯誤和起因之間的數學模型,同樣我們可以在模糊原理的基礎上對VRSDE建立數學模型 。在這個模型基礎上我們建立了設備的故障自動檢測系統已達到實時監控運行狀態和設備故障診斷的功能.系統的真實性在實際操作中得到驗證.</p><p>  2主要的錯誤和他們的起因</p><p>  根據注射質量和過程的影響,VRSDE的主要錯誤可以歸結成以下幾種:比列的浮動,不充分混合,不夠凈

67、化,注射口的泄露,量子的不穩定,量子的減少和沒有液體從射擊口出來.我們在對錯誤形成機理的研究表明在不同程度上錯誤的發生和以下的原因有關: 單方向閥處于故障狀態中,關閥處于故障狀態中,注射器噴灑時液體的泄露,注射器內的液體滲漏,用于凈化的容器內的液位或真空過低,液體溫度的不穩定,缸向下移動的速度過低,氣壓過低,計量泵磨損嚴重,測量系統的機器精度過低,比例過大或過小并且樹脂含有石英。錯誤及其原因的相關程度可以定性的描述成表1。</p&

68、gt;<p>  表1 VRSDE的主要錯誤及其原因的相對程度</p><p>  說明:“○”的數量表示錯誤及其原因的相對度</p><p>  3錯誤診斷的模糊模型的結構</p><p>  我們確定了VRSDE運行狀態中的各種故障,用V來發表:</p><p>  V1 比例浮動 </p>

69、<p>  V2 不充分混合</p><p>  V3 不夠凈化</p><p>  V = V4 = 噴射嘴泄露</p><p>  V5 量子浮動 </p><p>  V6 量子減少</p><p>  V7

70、 沒有液體從噴射嘴噴出 </p><p>  而引起各種錯誤癥狀的原因,我們用U表示:</p><p>  U1 單方向閥故障狀態</p><p>  U2 閉閥故障狀態</p><p>  U3 噴射廳的液體泄露 </p><p>  U4 注射

71、器內的液體泄露 </p><p>  U5 用于凈化的容器內的液位過低</p><p>  U6 用于凈化的容器內的真空過低</p><p>  U = u7 = 液體溫度不穩定</p><p>  U8 缸向下運動的速度太低</p><p>  U9

72、 氣體壓力太低</p><p>  U10 計量泵磨損嚴重</p><p>  U11 測量系統的機器精度過低</p><p>  U12 比例過大或過小</p><p>  U13 樹脂含有石英</p><p>  運行狀態U和癥狀V之間的模糊關系可以用矩陣R來表

73、示:</p><p>  r11 r12 ...... r17</p><p>  R = r21 r22 ...... r27</p><p>  .... ... ... ...</p><p>  r13.1 r13.2 … r13.4</p>

74、;<p>  當rij=uji, 0≦rij≦1, 1≦i≦13 , 1≦j≦7 時, rij 定義為VRSDE的運行狀態j和癥狀i的相對度.</p><p>  通過對傳感器數據的處理,我們可以得到癥狀模糊矩陣:</p><p>  A:A=a1/u1+a2/u2+...+a13/u13=(a1,a2,...,a13) 0≦ai≦1 i=1,2,...,13</p

75、><p>  A是癥狀U的一個子集,并且它的元素ai代表u到集合a的映射.元素ai表示癥狀ui在總的癥狀中的有效程度,或者從某種意義上講代表原因i嚴重與否.</p><p>  在模糊矩陣A和模糊關系矩陣r得到之后,狀態模糊矩陣B可以從下面的公式算得.</p><p><b>  B=A*R</b></p><p>  “

76、*”代表模糊復合運算.矩陣B是癥狀V的一個子集,可由下列公式運算得到:</p><p>  B=b1/v1+b2/v2+...+b7/v7=(b1,b2,....b7)</p><p>  公式中0 <=bj<=1, j=1,2,....,7.元素bj代表vj 到矩陣B的映射,并且表示錯誤j的嚴重程度.在我們得到狀態模糊矩陣之后,我們可以鑒定VRSDE的操作狀態并且根據元素b和

77、錯誤診斷原則來診斷他的錯誤.</p><p>  上述過程可以用表1來說明.</p><p><b>  圖1錯誤診斷流程圖</b></p><p>  3.1模糊關系矩陣R的研究</p><p>  在我們的研究中,我們采用了由多種方法如:專家經驗,實驗數據,兩次兩元素比較等多種方法相結合的綜合技術,然后確定在矩陣中元

78、素的值。以無數次實驗中得到的經驗為基礎,每個元素的值主要是靠兩次兩元素比較法來得到。接著我們不斷調整和核實這些數值直到他們和VRSDE中錯誤和原因之間的關系矩陣相吻合。模糊關系矩陣R被定義為如下:</p><p>  0.98 0.00 0.00 0.85 0.00 0.00</p><p>  0.00 0.00 0.95 0.98 0.84 0.63</p&g

79、t;<p>  0.32 0.98 0.71 0.82 0.18 0.00</p><p>  0.00 0.00 0.89 0.80 0.37 0.00</p><p>  0.42 0.96 0.68 0.92 0.95 0.00 </p><p>  0.45 0.35 0.97 0.67 0.68 0.

80、20 0.00</p><p>  R= 0.34 0.47 0.31 0.32 0.55 0.00 0.00 </p><p>  0.92 0.00 0.00 0.00 0.00 0.00</p><p>  0.91 0.00 0.00 0.00 0.00 0.82 </p><p> 

81、 0.30 0.00 0.00 0.90 0.15 0.00</p><p>  0.00 0.00 0.00 0.90 0.00 0.00</p><p>  0.71 0.00 0.00 0.00 0.00 0.00</p><p>  0.28 0.52 0.23 0.00 0.21 0.31 0.45</p&g

82、t;<p>  3.2癥狀模糊矩陣A的確定</p><p>  可以對傳感器收集到的數據的處理得到癥狀模糊矩陣A中的元素a(i =1, 2 ...., 13 ).由于這些元素的定義域為實數域,我們可以根據模糊集合的特點和性狀選擇元素。這些元素的值可查詢表2。對于其他一些元素我們可以根據表3確定他們的數值。</p><p>  3.3模糊復合運算的確定</p>&

83、lt;p>  引起錯誤的原因十分復雜。一些典型錯誤的原因不僅可以分為主要的和次要的,并且也可以對錯誤產生綜合的影響。此外,在多種原因中還存在復雜的聯系?;谏鲜鍪聦崳覀儾捎昧四:龔?fù)合運算操作“優先考慮主要癥狀”稱為模糊復合運算。因此不僅高度重視主要錯誤的決定性因素,也考慮到很多次要的方面。根據這種模糊復合運算操作,我們可以由下面的公式得出矩陣B中的元素b:</p><p>  bj=V( ai*rij)

84、 j=1,2,.....,7</p><p>  表2定義在實數域上癥狀模糊矩陣A中的元素的值 </p><p>  表3 癥狀模糊矩陣A中定義域不是在實數范圍的元素的確定</p><p>  3.4錯誤診斷原則的確定</p><p>  為了準確的鑒定的VRSDE操作狀態并且提供和錯誤有關的足夠多的信息,我們定義了兩個值λ1

85、和λ2 (λ1<λ2),并把它的工作狀態歸結為以下三類:正常狀態,提前警告狀態和故障狀態.錯誤模糊診斷的原則可以描述成: </p><p>  當max (bj) ≦λ1時, VRSDE處于正常狀態</p><p>  當λ1<max(bj) ≦λ2 VRSDE時,處于提前警告狀態</p>

86、;<p>  當max (bj)> λ2時.VRSDE處于故障狀態</p><p>  當設備處于提前警告狀態或故障狀態時,會發出預警信號或警告信號來警告操作同時系統會提供錯誤及其相關信息.實驗表明λ1 和λ2的最大值如下:</p><p>  λ1 =0.50 λ2 =0.80</p><p><b>  4錯誤自動

87、診斷實驗</b></p><p>  在建立錯誤診斷的數學模型之后,我們利用諸如像傳感器這樣的硬件,數據采集器,電腦,報警線路和相關的軟件建立了VRSDE的錯誤自動診斷系統,這樣就實現了對設備操作條件,錯誤診斷,相關錯誤的監控并且顯示出相關的信息等.</p><p>  錯誤自動診斷系統的數學模型建立在無數次實驗得來的經驗的基礎上,因此我們必須進行實驗來證實其準確性.實驗的方法

88、可以描述成如下:通過對設備實際操作,如果系統給出一個警告并且暗示設備存在錯誤,我們可以進行特殊的試驗來檢測錯誤存在與否,這樣可以保證系統準確無誤.此外,我們可以有周期的檢查VRSDE的工作參數來確定設備是否存在自身不能識別出來的錯誤.</p><p>  在2000年5月到2000年11月的半年時間里,我們在西北林業機械股份有限公司針對VCD-M3 VRSDE進行了一系列實驗,從中得到了表4的數據。從這些數據中我

89、們可以看出診斷的正確率達到了93.3%,系統的設計也基本達到要求。那么錯誤診斷的數學模型同樣可以間接從這結果中得到證實。在表格中可以看出在2000年月31日有一個錯誤診斷。這一錯誤的原因是控制閉閥位置的活塞震蕩過,從而活塞被固定住,不能動彈。這種現象發生的可能性極小,甚至可以稱為偶然。除了上述事實,我們?nèi)匀幻恐軠y試一次VRSDE的工作參數</p><p>  并且在這段時間內沒有發現系統自身檢測不了的問題.<

90、;/p><p>  表4 錯誤自動診斷實驗的數據</p><p><b>  5結論</b></p><p>  這種VRSDE的錯誤自動診斷方式是建立在模糊數學的基礎之上的,通過使用建立在數學模型上的VRSDE錯誤自動診斷系統,我們實現了對設備運行狀態和錯誤自動診斷系統的時實監控.系統的使用效果說明此系統有效的滿足了設計要求和顧客的期望.這種

91、錯誤診斷數學模型涉及許多主觀的參數,閥的數值都由經驗所得.因此,數值必須通過無數次的實驗核實和調整,從而和VRSDE的實際想吻合.</p><p><b>  參考資料</b></p><p>  1.A.H.張, 運行狀態監控技術與機電一體化設備的故障診斷. 西北科技大學出版社 1995(中國)</p><p>  2.Z.W.何,VRSDE

92、故障診斷系統的主要研究(主體性論文). 西安理工大學 2001(中國) </p><p>  3.A.P.陳 和 C.C.林 故障診斷的模糊方法. 模糊集合及其系統. Vol.118,pp.139-151.2001</p><p><b>  簡歷</b></p><p>  何正文現任安交通大學管理學院博士,其研究領域包括工業工程和ERP.&

溫馨提示

  • 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
  • 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
  • 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
  • 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
  • 5. 眾賞文庫僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
  • 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
  • 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。

評論

0/150

提交評論