2023年全國碩士研究生考試考研英語一試題真題(含答案詳解+作文范文)_第1頁
已閱讀1頁,還剩9頁未讀, 繼續免費閱讀

下載本文檔

版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領

文檔簡介

1、ORIGINALO. Kaynakli Æ E. Pulat Æ M. KilicThermal comfort during heating and cooling periods in an automobileReceived: 9 September 2003 / Published online: 17 September 2004 ? Springer-Verlag 2004Abstract Most v

2、ehicles have a heating, ventilation and air conditioning (HVAC) device to control the thermal environments of interior of the vehicle. But, under hot summer season or cold winter conditions, it is difficult to achieve an

3、d maintain thermal comfort in an automobile from the start up to the steady-state conditions. During these transition periods, an understanding of human thermoregulatory processes facilitates the design and development o

4、f improved heating and cooling systems. This study presents a model of thermal interactions between a human body and the interior environment of an automobile. The model is based on the heat balance equation for human bo

5、dy, combined with empirical equations defining the sweat rate and mean skin tem- perature. Simulation has been performed by the use of transient conditions. The effects of both heating and cooling processes on the therma

6、l comfort inside the automobile are investigated. Results are compared with the present measurements and available experimental data in the literature. It is shown that the agreement between the experimental data and the

7、 model is very good.List of symbols A surface area, m2cp specific heat, J/(kg K) CSIG cold signal f correction factor h heat transfer coefficient, W/(m2 K) i segment number j air or fabric layers number k conductive heat

8、 transfer coefficient, W/(m K)L heat load, W/m2m body mass, kg _ m mass flow rate from per unit area, kg/(s m2) M metabolic heat production rate, W nl number of layers covering segment p water vapor pressure, kPa Q heat

9、transfer rate, W r outer radius of fabric layer R thermal or evaporative resistance, (m2 K)/W or (m2 kPa)/W S heat storage, W t time, s (unless specified in minutes) T temperature,?C TS thermal sensation V air velocity,

10、m/s w skin wettedness W humidity ratio, kgH2O/kg dry air _ W external work rate accomplished, W WSIG warm signal x thickness, mmGreek symbols a ratio of skin layer mass to total body mass g permeation efficiencySubscript

11、s a air al air layer b body bl blood cd conduction cl clothing cr core cv convection dif diffusion e exposed to convective and radiant environment ev evaporationO. Kaynakli Æ E. Pulat Æ M. Kilic (&) Faculty

12、 of Engineering and Architecture, Department of Mechanical Engineering, Uludag ? University, Gorukle Campus, 16059 Bursa, Turkey E-mail: mkilic@uludag.edu.tr Tel.: +90-224-4429183 Fax: +90-224-4428021Heat Mass Transfer (

13、2005) 41: 449–458 DOI 10.1007/s00231-004-0558-9Chakroun and Al-Fahed [7] presented a study of the temperature variation and thermal comfort inside a car parked in the sun during the summer months in Kuwait. They also con

14、sidered the effect of using dif- ferent combinations of internal covering on the tem- perature inside the car. Burch et al. [4] reported the results of a series tests on passenger thermal comfort during warm-up under sev

15、ere winter driving condi- tions. They found that low-power electric heating pads installed on the seat and back support greatly reduce the time needed to attain thermal comfort. Further reductions in warm-up time can be

16、achieved by installing electric heaters in the air ducts, although the power requirements associated with this method are substantial. In addition to their experimental study, they presented an analytical study on this s

17、ubject in the paper of Burch et al. [5]. Heating and cooling periods from the start up of the vehicle require some time to reach steady-state conditions. During these periods, conditions are highly nonuniform over the bo

18、dy of the occupant. The vehicle passenger experiences localized chilling due to contact with an initially cold seat or steering wheel, nonuniform radiant heat transfer with the surround- ings, localized solar irradiation

19、, and nonuniform air velocities that vary depending on the location of the air registers and dashboard control settings. Thus, in addition to the air temperature, several other factors have a bearing on the thermal comfo

20、rt of the pas- senger. Consequently, there is substantial interest in the development of more efficient techniques for achieving and maintaining passenger thermal comfort in an automotive environment. This study presents

21、 a model of thermal interactions between a human and the interior environment of an automobile. Since, segmental analysis permits the determination of local discomforts by considering the clothing insulation asymmetry ef

22、fects in the relatively small volumes such as automobile cabin, the present model is based on the heat balance equation for human body by dividing it into 16 segments. By combining Gagge et al.’s [10] and Olesen et al.’s

23、 [15] approaches, all body segments are considered as two-concentric cylinders and required new data such as surface areas of body segments and their masses are refined from the existing literature. In this way, apart fr

24、om the Gagge et al.’s [10] model, it is tried to determine the local discomforts by calculating the thermal interactions of each segment and the skin temperature and wettedness. Simulation has been performed by the use o

25、f transient conditions. The effects of both heating and cooling processes on the thermal comfort inside the automobile are investigated. Experiments were also conducted for cooling periods. Until the thermal comfort reac

26、hed in the automobile compartment, the temperature and the humidity changed dramatically. Driver and passengers are greatly affected by these changes. The simulation results and experimental data were compared, in order

27、to validate the present model.2 Mathematical modelThe velocity of conditioned air that flow over passenger is very important from comfort point of view in small compartments that have large heating and cooling capacity e

28、specially such as automobile cabin. Flowing air over driver and passengers injected by inlet vents has not same value on any occupant’s body. Although it is a good approximation to take average velocity for typical indoo

29、r conditions, this results important mistakes by considering automobile interior. Local air velocities on the body of sitting passenger were determined experi- mentally by Burch et al. [5] (Table 1). In this study, deter

30、mination of heat losses from various regions of passenger is based on these velocity values. The model used in this study is based on the same approach described in the study of Olesen et al. [15]. In this study, human b

31、ody is divided by 16 regions by considering clothing groups and local air velocities on the body in order to investigate the effects of thermal environment to occupants especially driver in detail for both winter and sum

32、mer condition. In Table 2, surface areas and their fractions of total body surface area are given. To compute temporal temperature variations by using stored energy in the body segments it is required the masses of these

33、 segments. The masses of body seg- ments and their fractions of the total body mass are shown in Table 3. By considering the human body as whole, mean skin temperature gives an idea from thermal comfort point of view but

34、 the temperatures of the extremities such as hand, foot and face or naked parts of human body may increase or decrease unwanted values. By using the developed model, time rate of changes of the parameters that affect the

35、 thermal comfort such as sensible and latent heat losses each of 16 regions, skin temperatures and skin wettedness may be examined.2.1 Thermal and physiological modeling of human bodyA two-compartment transient energy ba

36、lance model developed by Gagge et al. [10] represents the body as two concentric cylinders the inner cylinder represents theTable 1 Local air velocities on the body [5]Region Air velocity (m/s)Head 0.13 Trunk 0.11 Right

溫馨提示

  • 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
  • 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
  • 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
  • 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
  • 5. 眾賞文庫僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
  • 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
  • 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。

評論

0/150

提交評論